Publikace  ASTM Volume 08.03 - Plastics (III):D5117 - latest; Reinforced Plastic Piping Systems and Chemical Equipment; Plastic Building Products 1.7.2021 náhled

ASTM Volume 08.03 - Plastics (III):D5117 - latest; Reinforced Plastic Piping Systems and Chemical Equipment; Plastic Building Products

ASTM Volume 08.03 - Plastics (III):D5117 - latest; Reinforced Plastic Piping Systems and Chemical Equipment; Plastic Building Products

Přeložit název

PUBLIKACE vydána dne 1.7.2021


DostupnostVyprodáno
CenaNA DOTAZ bez DPH
NA DOTAZ

Informace o produktu:

Označení: ASTM Volume 08.03 - Plastics (III):D5117 - latest; Reinforced Plastic Piping Systems and Chemical Equipment; Plastic Building Products
Počet stran: 1610
Přibližná hmotnost: 4861 g (10.72 liber)
Datum vydání: 1.7.2021
Země: Americká publikace

Anotace textu normy :

These three volumes, 08.01 through 08.03, feature over 480 plastics-related standards, including test methods that establish standard procedures for assessing physical, mechanical, optical, permanence, and thermal properties.Volume 08.03 also covers:



Plastic Building Products—standards deal with plastic siding products, glass-fiber-reinforced polyester plastic panels, and PVC building products.



Reinforced Plastic Piping Systems and Chemical Equipment—covers testing requirements for glass-fiber-reinforced thermosetting resin pipes, fittings, and joints; and establish chemical resistance of thermosetting resins.


Table of Contents



C581-20   Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
C582-09(2016)   Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
D953-19   Standard Test Method for Pin-Bearing Strength of Plastics
D1494-17   Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
D2105-01(2019)   Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
D2143-21   Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
D2517-18   Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
D2924-12(2017)   Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2925-14(2019)   Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
D2992-18   Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
D2996-17   Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2997-21   Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D3262-20   Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
D3299-18   Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D3517-19   Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
D3567-17   Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
D3678-19   Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
D3679-17   Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
D3681-18   Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
D3753-20   Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
D3754-19   Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
D3839-14(2019)   Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
D3840-19   Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
D3841-21   Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
D3982-21   Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts
D4000-20   Standard Classification System for Specifying Plastic Materials
D4020-18   Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
D4024-15   Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D4068-17   Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
D4097-19   Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D4161-14(2019)   Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
D4167-15   Standard Specification for Fiber-Reinforced Plastic Fans and Blowers
D4226-19e1   Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
D4329-21   Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
D4459-21   Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
D4477-16   Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
D4495-16   Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
D4551-17   Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
D4659-19   Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
D4674-19   Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
D4726-18   Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
D4754-18   Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
D4756-15(2021)   Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
D4803-18   Standard Test Method for Predicting Heat Buildup in PVC Building Products
D4890-18   Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols
D5117-17   Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
D5132-20   Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
D5138-16   Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
D5155-19   Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates
D5204-19   Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials
D5205-16   Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials
D5206-19   Standard Test Method for Windload Resistance of Rigid Plastic Siding
D5207-20   Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials
D5208-14   Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
D5224-12(2019)   Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
D5225-17   Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
D5226-21   Standard Practice for Dissolving Polymer Materials
D5227-21   Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins
D5260-16   Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
D5272-08(2013)   Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics
D5279-21   Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
D5296-19   Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
D5319-17   Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
D5336-15a   Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material
D5338-15(2021)   Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures
D5364-14(2019)   Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units
D5365-18   Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D5418-15   Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
D5419-14a   Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
D5420-21   Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
D5421-15   Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D5422-17   Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
D5436-15(2020)   Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
D5477-18   Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
D5491-08(2014)   Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
D5492-17   Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
D5507-21a   Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
D5508-16   Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
D5511-18   Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
D5523-21   Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
D5526-18   Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
D5575-18   Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
D5576-00(2021)e1   Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
D5577-19   Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
D5592-94(2018)   Standard Guide for Material Properties Needed in Engineering Design Using Plastics
D5594-18a   Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
D5628-18   Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
D5629-16   Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
D5630-13   Standard Test Method for Ash Content in Plastics
D5672/D5672M-15   Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique
D5675-13(2018)   Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
D5677-17   Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
D5685-19   Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
D5740-18   Standard Guide for Writing Material Standards in the Classification Format
D5748-95(2019)   Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
D5814-18   Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
D5857-17   Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
D5870-16   Standard Practice for Calculating Property Retention Index of Plastics
D5926-15(2020)   Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
D5927-17   Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
D5930-17   Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
D5946-17   Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
D5947-18   Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
D5948-05(2020)   Standard Specification for Molding Compounds, Thermosetting
D5988-18   Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil
D5989-18   Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)
D5990-20a   Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)
D5991-17   Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
D5998-16   Standard Specification for Molded Polyethylene Shipping and Storage Drums
D6040-18   Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D6041-18   Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
D6042-09(2016)   Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)
D6068-10(2018)   Standard Test Method for Determining J-R Curves of Plastic Materials
D6098-16   Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
D6099-18   Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
D6100-17   Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
D6108-19   Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
D6109-19   Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
D6110-18   Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
D6111-19a   Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
D6112-18   Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
D6117-18   Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
D6150-16   Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
D6226-21   Standard Test Method for Open Cell Content of Rigid Cellular Plastics
D6247-18   Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
D6261-14   Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
D6262-17   Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
D6263-15   Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
D6265-17   Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test
D6272-17e1   Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
D6287-17   Standard Practice for Cutting Film and Sheeting Test Specimens
D6288-17   Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
D6289-13(2019)   Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
D6290-19   Standard Test Method for Color Determination of Plastic Pellets
D6338-17   Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods
D6339-11(2019)   Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
D6341-21   Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C)
D6342-12(2017)e1   Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
D6358-19e1   Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods
D6360-15(2021)   Standard Practice for Enclosed Carbon-Arc Exposures of Plastics
D6394-21a   Standard Classification System for and Basis for Specification for Sulfone Plastics (SP)
D6400-19   Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities
D6436-14   Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
D6437-05(2016)e1   Standard Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)
D6456-10(2018)   Standard Specification for Finished Parts Made from Polyimide Resin
D6474-20   Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
D6576-20   Standard Specification for Flexible Cellular Rubber Chemically Blown
D6585-17   Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D6645-18   Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
D6662-17   Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
D6691-17   Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
D6712-17   Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
D6713-19   Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
D6778-20   Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)
D6779-21   Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
D6783-05a(2017)   Standard Specification for Polymer Concrete Pipe
D6835-17   Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
D6865-17   Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
D6866-21   Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
D6867-19   Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
D6868-21   Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities
D6869-17   Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
D6953-18   Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
D6954-18   Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
D6979-18   Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen
D6980-17   Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
D6988-13   Standard Guide for Determination of Thickness of Plastic Film Test Specimens
D7027-20   Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
D7029-17   Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F (82.2°C)
D7082-21   Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
D7083-16   Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
D7132-19   Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
D7133-16   Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
D7191-18   Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
D7192-20   Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors
D7193-17   Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D7194-19   Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
D7210-13   Standard Practice for Extraction of Additives in Polyolefin Plastics
D7211-13(2018)   Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
D7252-17   Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates
D7253-16   Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
D7254-20   Standard Specification for Polypropylene (PP) Siding
D7258-17   Standard Specification for Polymeric Piles
D7292-18   Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
D7293-19   Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
D7309-21a   Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
D7310-20   Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors
D7399-18   Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
D7436-17   Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
D7444-18a   Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
D7445-18   Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
D7471-19   Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials
D7472-19   Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
D7473/D7473M-21   Standard Test Method for Weight Attrition of Non-floating Plastic Materials by Open System Aquarium Incubations
D7474-17   Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
D7475-20   Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
D7486-14   Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
D7487-18   Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test
D7568-17   Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications
D7611/D7611M-20   Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
D7710-14   Standard Test Method for Determination of Volume and Density of Rigid and Irregularly Shaped Molded Cellular Materials
D7711-11(2015)   Standard Guide for Description of Polymer Pellet Defects
D7745-19   Standard Practice for Testing Pultruded Composites
D7774-17   Standard Test Method for Flexural Fatigue Properties of Plastics
D7791-17   Standard Test Method for Uniaxial Fatigue Properties of Plastics
D7792/D7792M-15   Standard Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
D7793-20   Standard Specification for Insulated Vinyl Siding
D7823-20   Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry
D7856-21   Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space
D7990-21   Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding
D7991-15   Standard Test Method for Determining Aerobic Biodegradation of Plastics Buried in Sandy Marine Sediment under Controlled Laboratory Conditions
D7992/D7992M-15   Standard Practice for Elevated Temperature and Moisture Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
D7993-15(2019)   Standard Guide for Analyzing Complex Phthalates
D7997-21   Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations
D8019-15   Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets
D8033-16   Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
D8036-16   Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in Pure MDI
D8065/D8065M-16   Standard Classification System and Basis for Specification for Specifying Plastic Films
D8069-17a   Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
D8133-21   Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry
D8136-17   Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge
D8156-18   Standard Classification System for and Basis of Specifications for Thermoplastic Elastomer Copolyester Molding and Extrusion Materials (TPC)
D8195-18   Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting
D8280-20a   Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography
D8366-21   Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene Fluoride) PVDF
E1788-16   Standard Test Method for Acidity in Acrylonitrile
E1863-18   Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography

Doporučujeme:




Cookies Cookies

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.