Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM Volume 04.11 - Building Constructions (I): E72 - E2110
Přeložit název
PUBLIKACE vydána dne 1.11.2021
Dostupnost | Vyprodáno |
Cena | NA DOTAZ bez DPH |
NA DOTAZ |
Označení: ASTM Volume 04.11 - Building Constructions (I): E72 - E2110
Počet stran: 1714
Přibližná hmotnost: 5173 g (11.40 liber)
Datum vydání: 1.11.2021
Země: Americká publikace
Volumes 04.11 and 04.12 cover standards for measuring the performance of buildings, including: air leakage and ventilation; building economics; building preservation; durability of building constructions; structural performance; exterior insulation and finish systems; lead hazards; and roof systems, windows, and doors. Volume 04.12 includes standards on sustainability, including the design, construction, and operation of green buildings and environmental life cycle assessment. It also provides the latest specifications for the evaluation and selection of exhibits for environmentally sustainable meetings, events, trade shows, and conferences. This volume also provides standards for designing and implementing efficient and cost-effective personal asset management systems. These standards encompass the entire life cycle of personal property and establish the guiding principles of asset management, including administrative control of assets; physical inventory; and the assessment of loss, damage, and destruction. Volume 04.12 also covers standards on technology and underground utilities that cover rehabilitation of sewers using chemical grouting techniques, seismic fragility of water conveyance systems, deployment of optical fiber systems in natural gas pipelines.
E72-15 | Standard Test Methods of Conducting Strength Tests of Panels for Building Construction |
E73-13 | Standard Practice for Static Load Testing of Truss Assemblies |
E154/E154M-08a(2019) | Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover |
E196-06(2018) | Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs |
E241-20 | Standard Guide for Limiting Water-Induced Damage to Buildings |
E283/E283M-19 | Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen |
E330/E330M-14 | Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference |
E331-00(2016) | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
E405-04(2018) | Standard Test Methods for Wear Testing Rotary Operators for Windows |
E455-19 | Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings |
E488/E488M-18 | Standard Test Methods for Strength of Anchors in Concrete Elements |
E529-04(2018) | Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction |
E546-14(2020) | Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units |
E547-00(2016) | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference |
E564-06(2018) | Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings |
E575-05(2018) | Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies |
E576-14(2020) | Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position |
E605/E605M-19 | Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
E631-15 | Standard Terminology of Building Constructions |
E661-03(2015)e1 | Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads |
E695-03(2015)e1 | Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading |
E736/E736M-19 | Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members |
E741-11(2017) | Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution |
E754-80(2014)e1 | Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints |
E759/E759M-92(2020) | Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members |
E760/E760M-92(2020) | Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members |
E761/E761M-92(2020) | Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members |
E779-19 | Standard Test Method for Determining Air Leakage Rate by Fan Pressurization |
E783-02(2018) | Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors |
E833-14(2021) | Standard Terminology of Building Economics |
E859/E859M-93(2020) | Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members |
E864-20 | Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels |
E865-20 | Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels |
E866-19 | Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels |
E874-19 | Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels |
E894-18 | Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings |
E917-17e1 | Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems |
E935-21 | Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings |
E937/E937M-93(2020) | Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
E964-15(2020)e1 | Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems |
E987-88(2017) | Standard Test Methods for Deglazing Force of Fenestration Products |
E990-21 | Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels |
E997-15(2021) | Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing |
E998-19 | Standard Test Method for Structural Performance of Architectural Glass Products Under the Influence of Uniform Static Loads |
E1057-15(2020)e1 | Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems |
E1074-15(2020)e1 | Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems |
E1091-21 | Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels |
E1105-15 | Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference |
E1121-15(2020)e1 | Standard Practice for Measuring Payback for Investments in Buildings and Building Systems |
E1155M-14 | Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers (Metric) |
E1155-20 | Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers |
E1185-15(2020)e1 | Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems |
E1186-17 | Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems |
E1190-11(2018) | Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members |
E1233/E1233M-14(2021) | Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential |
E1258-88(2018) | Standard Test Method for Airflow Calibration of Fan Pressurization Devices |
E1300-16 | Standard Practice for Determining Load Resistance of Glass in Buildings |
E1307-18 | Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels |
E1369-15(2020)e1 | Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
E1399/E1399M-97(2017) | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
E1423-21 | Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems |
E1424-91(2016) | Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen |
E1425-14 | Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems |
E1480-92(2013) | Standard Terminology of Facility Management (Building-Related) |
E1481-00a(2021) | Standard Terminology of Railing Systems and Rails for Buildings |
E1486-14 | Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria |
E1486M-14 | Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric) |
E1509-12(2017) | Standard Specification for Room Heaters, Pellet Fuel-Burning Type |
E1512-01(2015) | Standard Test Methods for Testing Bond Performance of Bonded Anchors |
E1513/E1513M-93(2020) | Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
E1514-98(2017)e1 | Standard Specification for Structural Standing Seam Steel Roof Panel Systems |
E1554/E1554M-13(2018) | Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization |
E1555-20 | Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair |
E1556-20 | Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair |
E1557-09(2020)e1 | Standard Classification for Building Elements and Related Sitework—UNIFORMAT II |
E1592-05(2017) | Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference |
E1602-03(2017) | Standard Guide for Construction of Solid Fuel Burning Masonry Heaters |
E1612/E1612M-94(2017) | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
E1637-98(2017)e1 | Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems |
E1643-18a | Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs |
E1646-95(2018) | Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference |
E1660-95a(2018) | Standard Classification for Serviceability of an Office Facility for Support for Office Work |
E1661-95a(2018) | Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness |
E1662-95a(2018) | Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment |
E1663-03(2019) | Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology |
E1664-19 | Standard Classification for Serviceability of an Office Facility for Layout and Building Factors |
E1665-95a(2018) | Standard Classification for Serviceability of an Office Facility for Facility Protection |
E1666-95a(2018) | Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions |
E1667-95a(2018) | Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants |
E1668-95a(2018) | Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff |
E1669-95a(2018) | Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding |
E1670-95a(2018) | Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance |
E1671-95a(2018) | Standard Classification for Serviceability of an Office Facility for Cleanliness |
E1677-19 | Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls |
E1679-13(2019) | Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed |
E1680-16 | Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems |
E1692-95a(2018) | Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants |
E1693-95(2018) | Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets |
E1694-95a(2018) | Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies |
E1699-14(2020) | Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes |
E1700-16 | Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope |
E1701-95(2018) | Standard Classification for Serviceability of an Office Facility for Manageability |
E1730-19 | Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores |
E1745-17 | Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs |
E1748-95(2017) | Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System |
E1749-18 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
E1765-16e1 | Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes |
E1773-18 | Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants |
E1783/E1783M-96(2017) | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
E1793-19 | Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters |
E1794-21 | Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200?°F Elevated Humidity Service), Type II Panels |
E1800-21 | Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160?°F Elevated Humidity Service), Type I Panels |
E1801-21 | Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters |
E1803-14 | Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels |
E1804-16 | Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project |
E1825-21 | Standard Guide for Evaluation of Building Exterior Enclosure Materials, Products, and Systems |
E1826-20 | Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded |
E1827-11(2017) | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
E1836/E1836M-09(2016) | Standard Practice for Building Floor Area Measurements for Facility Management |
E1851-21 | Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures |
E1857-97(2021) | Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces |
E1886-19 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
E1925-18 | Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures |
E1946-18 | Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects |
E1974-19 | Standard Specification for Shelter, Electrical Equipment S-250/G |
E1975-21 | Standard Specification for Shelter, Electrical, Equipment S-280/G |
E1976-19 | Standard Specification for Shelter, Tactical, Nonexpandable |
E1977-18 | Standard Specification for Shelter, Tactical, Expandable, One-Side |
E1978-18 | Standard Specification for Shelter, Tactical, Expandable, Two-Side |
E1993/E1993M-98(2020) | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
E1996-20 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
E1998-11(2018) | Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances |
E2004-18 | Standard Test Method for Facing Cleavage of Sandwich Panels |
E2013-20 | Standard Practice for Developing Functions, Constructing FAST Diagrams, and Performing Function Analysis During Value Engineering (VE)/Value Analysis (VA) Study |
E2026-16a | Standard Guide for Seismic Risk Assessment of Buildings |
E2029-11(2019) | Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution |
E2068-00(2016) | Standard Test Method for Determination of Operating Force of Sliding Windows and Doors |
E2083-05(2016) | Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit |
E2098/E2098M-13(2018) | Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution |
E2099-00(2014)e1 | Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems |
E2103/E2103M-19 | Standard Classification for Bridge Elements—UNIFORMAT II |
E2110-17 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
E2112-19c | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
E2121-13 | Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings |
E2126-19 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings |
E2127-01A(2015)e1 | Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction |
E2128-20 | Standard Guide for Evaluating Water Leakage of Building Walls |
E2134/E2134M-14(2018) | Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) |
E2136-04(2013) | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability |
E2140-01(2017) | Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head |
E2141-14 | Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units |
E2150-17 | Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure |
E2156-04(2013) | Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings |
E2166-16 | Standard Practice for Organizing and Managing Building Data |
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 18.04.2024 (Počet položek: 2 859 866)
© Copyright 2024 NORMSERVIS s.r.o.