Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM E661-03(2015)e1
Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads (Includes all amendments And changes 10/21/2022).
Automaticky přeložený název:
Standardní zkušební metoda pro výkon dřeva a na bázi dřeva podlahou a opláštění střech při soustředném statické i nárazovém zatížení,
NORMA vydána dne 1.3.2015
Informace o normě:
Označení normy: ASTM E661-03(2015)e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.3.2015
Kód zboží: NS-583398
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM E661-03(2015)e1 :
Keywords:
concentrated static load, deflection resistance, drop-bag tests, floor sheathing, impact load, roof sheathing, ultimate impact load, wood sheathing ,, ICS Number Code 79.040 (Wood, sawlogs and sawn timber),79.060.01 (Wood-based panels in general)
Doplňující informace
| Significance and Use | ||||||||
|
5.1 The procedures outlined will provide data that can be used to evaluate the structural performance, under concentrated loads, of roof and floor sheathing, separate from the effects of the framing, under simulated conditions representative of those in actual service. 5.2 The procedures are intended to be applied to roof or floor sheathing materials installed directly to framing. They are not intended for the evaluation of the framed assembly as a whole. |
||||||||
| 1. Scope | ||||||||
|
1.1 This test method covers procedures for determining the resistance to deflection and damage of floor and roof sheathing used in site-built construction subjected to concentrated static loads as well as impact loads from nonrigid blunt objects. It is applicable to wood and wood-based panels and boards, but is not intended to cover profiled metal decks, nor precast or cast-in-place slabs. Surface indentation is not evaluated separately from deflection. 1.2 Three applications are covered: roof sheathing, subfloors, and single floors. Roof sheathing is tested in both a dry and a wet condition, while subfloors and single floors are both tested in a dry condition, as well as a condition of having dried out after being wet. These moisture conditions are those commonly experienced with site-built construction. Note 1: Where it is anticipated that sheathing will be
subjected only to dry conditions during construction and use, or
else to greater moisture exposure than is indicated in 7.3.2, the corresponding exposure
conditions may be modified by agreement between the interested
parties. For example, shop-built construction may be tested dry
only, although the possibility of exposure to high humidity or
leaks and flooding during use should be considered.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||
| 2. Referenced Documents | ||||||||
|
Doporučujeme:
Aktualizace technických norem
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
