Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints (Includes all amendments And changes 10/6/2022).
Automaticky přeložený název:
Standardní zkušební metoda pro vytahování odpor kravat a kotev zakotveny v zdící malty kloubů
NORMA vydána dne 1.10.2014
Označení normy: ASTM E754-80(2014)e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2014
Kód zboží: NS-47898
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
anchors, masonry, mortar joints, ties, ICS Number Code 91.060.01 (Elements of buildings in general)
Significance and Use | ||||||||||||||||||
5.1 This test method is intended to provide a simple inexpensive means of generating conservative, comparative data on pullout strengths of various ties and anchors used with different types of masonry units and mortars. This test method is recommended for such use until economical, improved methods can be developed to simulate service conditions more inclusively. |
||||||||||||||||||
1. Scope | ||||||||||||||||||
1.1 This test method provides procedures for determining the ability of individual masonry ties and anchors to resist extraction from a masonry mortar joint. 1.2 Two laboratory testing procedures are provided for use with test specimens which consist of a masonry tie or anchor embedded in mortar between twin stack-bonded masonry units. 1.2.1 Procedure A—For use with small (brick-size) masonry units. 1.2.2 Procedure B—For use with large (block-size) masonry units. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||
|
Poslední aktualizace: 01.05.2024 (Počet položek: 2 896 514)
© Copyright 2024 NORMSERVIS s.r.o.