Publikace  ASTM Volume 04.01 - Cement; Lime; Gypsum 1.9.2021 náhled

ASTM Volume 04.01 - Cement; Lime; Gypsum

ASTM Volume 04.01 - Cement; Lime; Gypsum

Přeložit název

PUBLIKACE vydána dne 1.9.2021


Jazyk
Provedení
Dostupnostdo 7 pracovních dnů
Cena6 217.00 bez DPH
6 217.00

Informace o produktu:

Označení: ASTM Volume 04.01 - Cement; Lime; Gypsum
Počet stran: 920
Přibližná hmotnost: 2791 g (6.15 liber)
Poznámka: *** DOČASNĚ VYPRODÁNO ***
Datum vydání: 1.9.2021
Země: Americká publikace
Kategorie: ASTM Section 04 - Construction

Anotace textu normy :

Volume 04.01 features specifications and test methods that establish the property requirements and measurement procedures for hydraulic cements, including portland, natural, pozzolanic, masonry, rapid hardening, and slag.It includes standards that define the appropriate qualities of lime and limestone and how to analyze them for environmental and industrial uses. The remaining standards in this volume address gypsum and related building materials and systems, including application procedures and related accessories, including exterior insulation and finishing systems (EIFS). ASTMs Manual of Cement Testing, a valuable companion to these standards, also appears in this volume.


Table of Contents



C5-18   Standard Specification for Quicklime for Structural Purposes
C10/C10M-19   Standard Specification for Natural Cement
C11-18b   Standard Terminology Relating to Gypsum and Related Building Materials and Systems
C22/C22M-00(2021)   Standard Specification for Gypsum
C25-19   Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
C28/C28M-10(2020)   Standard Specification for Gypsum Plasters
C35-01(2019)   Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
C50/C50M-13(2019)   Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
C51-21   Standard Terminology Relating to Lime and Limestone (as Used by the Industry)
C59/C59M-00(2020)   Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
C61/C61M-00(2020)   Standard Specification for Gypsum Keenes Cement
C91/C91M-18   Standard Specification for Masonry Cement
C109/C109M-21   Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens)
C110-20   Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C114-18   Standard Test Methods for Chemical Analysis of Hydraulic Cement
C141/C141M-14   Standard Specification for Hydrated Hydraulic Lime for Structural Purposes
C150/C150M-21   Standard Specification for Portland Cement
C151/C151M-18   Standard Test Method for Autoclave Expansion of Hydraulic Cement
C183/C183M-16   Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
C185-20   Standard Test Method for Air Content of Hydraulic Cement Mortar
C187-16   Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
C188-17   Standard Test Method for Density of Hydraulic Cement
C191-19   Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
C204-18e1   Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
C206-14   Standard Specification for Finishing Hydrated Lime
C207-18   Standard Specification for Hydrated Lime for Masonry Purposes
C219-20a   Standard Terminology Relating to Hydraulic and Other Inorganic Cements
C226-19   Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
C230/C230M-21   Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
C266-20   Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
C305-20   Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C317/C317M-00(2019)   Standard Specification for Gypsum Concrete
C318/C318M-13(2018)   Standard Specification for Gypsum Formboard
C348-21   Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
C349-18   Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
C359-20   Standard Test Method for Early Stiffening of Hydraulic-Cement (Mortar Method)
C400-19   Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
C430-17   Standard Test Method for Fineness of Hydraulic Cement by the 45-?m (No. 325) Sieve
C451-19   Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
C452-21   Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
C465-19   Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
C471M-20ae1   Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
C472-20   Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete
C473-19   Standard Test Methods for Physical Testing of Gypsum Panel Products
C474-15(2020)   Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
C475/C475M-17   Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
C490/C490M-17   Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
C511-19   Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C514-04(2020)   Standard Specification for Nails for the Application of Gypsum Board
C563-20   Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement
C587-04(2018)   Standard Specification for Gypsum Veneer Plaster
C593-19   Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
C595/C595M-21   Standard Specification for Blended Hydraulic Cements
C596-18   Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
C602-20   Standard Specification for Agricultural Liming Materials
C631-09(2020)   Standard Specification for Bonding Compounds for Interior Gypsum Plastering
C645-18   Standard Specification for Nonstructural Steel Framing Members
C688-14   Standard Specification for Functional Additions for Use in Hydraulic Cements
C706-19   Standard Specification for Limestone for Animal Feed Use
C737-13   Standard Specification for Limestone for Dusting of Coal Mines
C754-20   Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
C778-17   Standard Specification for Standard Sand
C786/C786M-17   Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-?m (No. 50), 150-?m (No. 100), and 75-?m (No. 200) Sieves by Wet Methods
C806-18   Standard Test Method for Restrained Expansion of Expansive Cement Mortar
C807-20   Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
C821-14   Standard Specification for Lime for Use with Pozzolans
C840-20   Standard Specification for Application and Finishing of Gypsum Board
C841-03(2018)   Standard Specification for Installation of Interior Lathing and Furring
C842-05(2021)   Standard Specification for Application of Interior Gypsum Plaster
C843-17   Standard Specification for Application of Gypsum Veneer Plaster
C844-15(2021)   Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
C845/C845M-18   Standard Specification for Expansive Hydraulic Cement
C847-18   Standard Specification for Metal Lath
C897-15(2020)   Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
C911-19   Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
C917/C917M-18   Standard Test Method for Evaluation of Variability of Cement from a Single Source Based on Strength
C926-20b   Standard Specification for Application of Portland Cement-Based Plaster
C932-06(2019)   Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering
C933-18   Standard Specification for Welded Wire Lath
C954-18   Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
C955-18e1   Standard Specification for Cold-Formed Steel Structural Framing Members
C956-04(2019)   Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
C977-18   Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
C1002-20   Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
C1005-20   Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
C1007-20   Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
C1012/C1012M-18b   Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
C1032-18   Standard Specification for Woven Wire Plaster Base
C1038/C1038M-19   Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
C1047-19   Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
C1063-21   Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
C1097-19   Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures
C1157/C1157M-20a   Standard Performance Specification for Hydraulic Cement
C1164-14   Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
C1177/C1177M-17   Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
C1178/C1178M-18   Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
C1222-21   Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
C1264-19   Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products
C1271-99(2020)   Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
C1278/C1278M-17   Standard Specification for Fiber-Reinforced Gypsum Panel
C1280-18   Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing
C1301-95(2014)   Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
C1318-15a(2020)   Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
C1328/C1328M-19   Standard Specification for Plastic (Stucco) Cement
C1329/C1329M-16a   Standard Specification for Mortar Cement
C1355/C1355M-96(2020)   Standard Specification for Glass Fiber Reinforced Gypsum Composites
C1356-07(2020)   Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
C1365-18   Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
C1381/C1381M-97(2018)   Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
C1396/C1396M-17   Standard Specification for Gypsum Board
C1397-13(2019)   Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage
C1437-20   Standard Test Method for Flow of Hydraulic Cement Mortar
C1467/C1467M-00(2021)   Standard Specification for Installation of Molded Glass Fiber Reinforced Gypsum Parts
C1489-15   Standard Specification for Lime Putty for Structural Purposes
C1506-17   Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
C1513-18   Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
C1516-05(2017)   Standard Practice for Application of Direct-Applied Exterior Finish Systems
C1529-19   Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
C1535-05(2017)   Standard Practice for Application of Exterior Insulation and Finish Systems Class PI
C1546-19   Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
C1565-19   Standard Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements
C1600/C1600M-19   Standard Specification for Rapid Hardening Hydraulic Cement
C1608-17   Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
C1629/C1629M-19   Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
C1658/C1658M-19e1   Standard Specification for Glass Mat Gypsum Panels
C1702-17   Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
C1707-18   Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes
C1738/C1738M-19   Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes
C1749-17a   Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
C1764-20   Standard Test Methods for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications
C1766-15(2019)   Standard Specification for Factory-Laminated Gypsum Panel Products
C1787-20   Standard Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications
C1788-20   Standard Specification for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications
C1789-14(2018)   Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels
C1795-17   Standard Test Methods for High-Temperature Characterization of Gypsum Boards and Panels
C1858-17a   Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions
C1860-21   Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
C1861-20   Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
C1872-18e2   Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement
C1874-20   Standard Test Method for Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer
C1875-18   Standard Practice for Determination of Major and Minor Elements in Aqueous Pore Solutions of Cementitious Pastes by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES)
C1881-20   Standard Guide for Closed-Loop Recycling of Scrap Gypsum Panel Products
C1891-20   Standard Test Method for Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325)
D6249-19   Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
R0028- Manual of Cement Testing (This is not an ASTM standard; available as PDF, only)
R0029- Metric Practice Guide for Cement (This is not an ASTM standard; available as PDF, only)

Doporučujeme:


Cookies Cookies

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.