Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM C1355/C1355M-96(2020)
Standard Specification for Glass Fiber Reinforced Gypsum Composites
Přeložit název
NORMA vydána dne 1.6.2020
Informace o normě:
Označení normy: ASTM C1355/C1355M-96(2020)
Datum vydání normy: 1.6.2020
Kód zboží: NS-997533
Počet stran: 2
Přibližná hmotnost: 6 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM C1355/C1355M-96(2020) :
This specification covers glass fiber reinforced gypsum (GRG) composites suitable for producing GRG parts for non-loading bearings, thin sections, and ornamental shapes for architectural embellishment of interior building construction. Both the neat alpha gypsum cement and the resulting composite materials should conform to the specified physical and mechanical properties such as hardness, flexural strength, impact resistance, coefficient of linear thermal expansion, humidified deflection, surface burning characteristics, and nail pull resistance.
Keywords:
alpha gypsum cement, glass fiber reinforced gypsum, glass fiber reinforced gypsum composite, GRG, GRG composite ,, ICS Number Code 91.060.10 (Walls. Partitions. Facades), 91.100.10 (Cement. Gypsum. Lime. Mortar)
Doplňující informace
| 1. Scope | ||||||||||||||||||||
|
1.1 This specification covers glass fiber reinforced gypsum (GRG) composites having minimum properties and quality suitable to allow the production of GRG parts for non-loading bearing, thin section, ornamental shapes for architectural embellishment of interior building construction. 1.2 The values stated in either inch-pound units or SI [metric] are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be independent of the other. Values from the two systems shall not be combined. 1.3 The text of this standard references footnotes which provide explanatory material. These footnotes shall not be considered as requirements of the standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||
|
Doporučujeme:
