Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement
Přeložit název
NORMA vydána dne 1.6.2020
Označení normy: ASTM C563-20
Datum vydání normy: 1.6.2020
Kód zboží: NS-999934
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
blended hydraulic cement, calcium sulfate, cement, compressive strength, gypsum, hydraulic cement, optimum sulfate content (of cement), portland cement, strength (of cement), sulfate content (of cement) ,, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)
Significance and Use | ||||||||||||||||||||
3.1 The purpose of this guide is to estimate the SO3.2 The SO3 content of a cement giving maximum performance is different at different ages, with different performance criteria and with different materials such supplementary cementitious materials and chemical admixtures. A manufacturer can choose the performance criteriato determine optimum SONote 1: Typically, the optimum SO3 content is higher the later the age. 3.3 This guide indicates optimum SO3.4 It should not be assumed that the optimum SO3.5 The guide is applicable to cements specified in Specifications C150/C150M, C595/C595M, and C1157/C1157M. |
||||||||||||||||||||
1. Scope | ||||||||||||||||||||
1.1 This guide describes the determination of approximate optimum SO3 for maximum performance as a result of substituting calcium sulfate for a portion of the cement. 1.2 This guide refers to the sulfur trioxide (SO1.3 Values stated as SI units are to be regarded as standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||
|
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.