Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM C206-14
Standard Specification for Finishing Hydrated Lime
Automaticky přeložený název:
Standardní specifikace pro dokončovací vápenného hydrátu
NORMA vydána dne 1.12.2014
Informace o normě:
Označení normy: ASTM C206-14
Poznámka: NEPLATNÁ
Datum vydání normy: 1.12.2014
Kód zboží: NS-12529
Počet stran: 2
Přibližná hmotnost: 6 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM C206-14 :
Keywords:
finishing lime, masonry, plaster, plasticity, popping and pitting, residue, Type N, Type S, unhydrated oxides ,, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)
Doplňující informace
| 1. Scope | ||||||||||||||||
|
1.1 This specification covers two types of finishing hydrated lime that are suitable for use in the scratch, brown, and finish coats of plaster, for stucco, for mortar, and as an addition to portland-cement concrete. The two types of lime sold under this specification shall be designated as follows: 1.1.1 Type N—Normal hydrated lime for finishing purposes, and 1.1.2 Type S—Special hydrated lime for finishing purposes. Note 1: Type N, normal finishing hydrated lime, is
differentiated from Type S, special finishing hydrated lime, in
that no limitation on the amount of unhydrated oxides is specified
for Type N hydrate, and the plasticity requirement for Type N
hydrate shall be determined after soaking for 16 to 24
h.
Note 2: For lime putty, refer to Specification C1489.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. |
||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||
|
Doporučujeme:
