Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM C1707-18

Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

Přeložit název

NORMA vydána dne 1.10.2018

Jazyk
Provedení	PDF - okamžité stažení - 1 413.90 Kč PDF + redline - ihned - 1 696.70 Kč Tištěné - 1 413.90 Kč Tisk + redline - 1 696.70 Kč
Dostupnost	SKLADEM
Cena	1 413.90 Kč bez DPH
1 413.90 Kč

Informace o normě:

Označení normy: ASTM C1707-18
Datum vydání normy: 1.10.2018
Kód zboží: NS-904605
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Cement. Sádra. Vápno. Malta

Anotace textu normy ASTM C1707-18 :

This specification covers four types of pozzolanic hydraulic lime for structural purposes which include use in mortar, scratch, brown, and finish (stucco) coats of interior or exterior plaster. The four types of pozzolanic hydraulic lime are classified according to the minimum hydrated lime content, maximum hydraulic cement content, and specific performance requirements. Test specimens shall be stored in a moist room or cabinet wherein the storage surface shall be in equilibrium with the space to ensure no moisture loss. The specimens shall be subjected to testing to determine conformance to the following requirements: water soluble alkali, sulfur trioxide content, carbon dioxide content, fineness, maximum time of initial and final set, autoclave expansion, air content, water retention, and compressive strength.

Keywords:

hydrated lime, mortar, plaster grout, pozzolan, pozzolanic hydraulic lime,, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)

Doplňující informace

1. Scope

1.1 This standard covers four types of pozzolanic hydraulic lime for structural purposes which include use in mortar, scratch, brown, and finish (stucco) coats of interior or exterior plaster.

1.1.1 PHL—Pozzolanic hydraulic lime for use in mortar, scratch, brown, and finish (stucco) coats of interior or exterior plaster.

1.1.2 PHL_c—PHL with a maximum 20 % binder weight of hydraulic cement.

1.1.3 PHL-A—Air-entrained PHL.

1.1.4 PHL_c-A—Air-entrained PHL_{1.2 The values stated in SI units are to
be regarded as standard.}

1.3 This specification classifies pozzolanic hydraulic lime by minimum hydrated lime content, maximum hydraulic cement content, and specific performance requirements.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

C50-00	Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
C51-23	Standard Terminology Relating to Lime and Limestone (as Used by the Industry)
C109/C109M-23	Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50?mm [2 in.] Cube Specimens)
C110-20	Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C114-23	Standard Test Methods for Chemical Analysis of Hydraulic Cement
C150-07	Standard Specification for Portland Cement
C207-18	Standard Specification for Hydrated Lime for Masonry Purposes
C266-21	Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
C270-19ae1	Standard Specification for Mortar for Unit Masonry (Includes all amendments and changes 1/4/2024).
C305-20	Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C511-21	Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C595-08	Standard Specification for Blended Hydraulic Cements
C778-21	Standard Specification for Standard Sand
C1157-08	Standard Performance Specification for Hydraulic Cement
C25-19	Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.