|
D2951-00
|
Standard Test Method for Resistance of
Types III and IV Polyethylene Plastics to Thermal Stress-Cracking
(Withdrawn 2006)
|
|
D3895-19
|
Standard Test Method for
Oxidative-Induction Time of Polyolefins by Differential Scanning
Calorimetry
|
|
D3915-06
|
Standard Specification for Rigid
Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride)
(CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure
Applications (Withdrawn 2015)
|
|
D495-22
|
Standard Test Method for High-Voltage,
Low-Current, Dry Arc Resistance of Solid Electrical Insulation
|
|
D569-90
|
Method for Measuring the Flow Properties
of Thermoplastic Molding Materials (Withdrawn 1995)
|
|
D570-22
|
Standard Test Method for Water Absorption
of Plastics
|
|
D573-04(2019)
|
Standard Test Method for
Rubber´Deterioration in an Air Oven
|
|
D575-91(2018)
|
Standard Test Methods for Rubber
Properties in Compression
|
|
D618-21
|
Standard Practice for Conditioning
Plastics for Testing
|
|
D624-00(2020)
|
Standard Test Method for Tear Strength of
Conventional Vulcanized Rubber and Thermoplastic Elastomers
|
|
D635-22
|
Standard Test Method for Rate of Burning
and/or Extent and Time of Burning of Plastics in a Horizontal
Position
|
|
D638-22
|
Standard Test Method for Tensile
Properties of Plastics
|
|
D648-18
|
Standard Test Method for Deflection
Temperature of Plastics Under Flexural Load in the Edgewise
Position
|
|
D695-23
|
Standard Test Method for Compressive
Properties of Rigid Plastics
|
|
D1248-16
|
Standard Specification for Polyethylene
Plastics Extrusion Materials for Wire and Cable
|
|
D1430-22
|
Standard Classification System for
Polychlorotrifluoroethylene (PCTFE) Plastics
|
|
D1434-23
|
Standard Test Method for Determining Gas
Permeability Characteristics of Plastic Film and Sheeting
|
|
D1435-20
|
Standard Practice for Outdoor Weathering
of Plastics
|
|
D1499-13(2021)
|
Standard Practice for Filtered Open-Flame
Carbon-Arc Exposures of Plastics
|
|
D1505-18
|
Standard Test Method for Density of
Plastics by the Density-Gradient Technique
|
|
D149-20
|
Standard Test Method for Dielectric
Breakdown Voltage and Dielectric Strength of Solid Electrical
Insulating Materials at Commercial Power Frequencies
|
|
D150-22
|
Standard Test Methods for AC Loss
Characteristics and Permittivity (Dielectric Constant) of Solid
Electrical Insulation
|
|
D256-23e1
|
Standard Test Methods for Determining the
Izod Pendulum Impact Resistance of Plastics (Includes all
amendments and changes 4/7/2023).
|
|
D257-14(2021)e1
|
Standard Test Methods for DC Resistance
or Conductance of Insulating Materials (Includes all amendments and
changes 5/6/2021).
|
|
D395-18
|
Standard Test Methods for Rubber
Property´Compression Set
|
|
D412-16(2021)
|
Standard Test Methods for Vulcanized
Rubber and Thermoplastic Elastomers—Tension
|
|
D471-16a(2021)
|
Standard Test Method for Rubber
Property—Effect of Liquids (Includes all amendments and changes
6/25/2021).
|
|
D706-20
|
Standard Classification System and Basis
for Specifications for Cellulose Acetate Molding and Extrusion
Compounds (CA)
|
|
D747-10
|
Standard Test Method for Apparent Bending
Modulus of Plastics by Means of a Cantilever Beam (Withdrawn
2019)
|
|
D785-23
|
Standard Test Method for Rockwell
Hardness of Plastics and Electrical Insulating Materials
|
|
D787-18
|
Standard Specification for Ethyl
Cellulose Molding and Extrusion Compounds
|
|
D788-16
|
Standard Classification System for
Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion
Compounds
|
|
D707-15(2023)
|
Standard Classification System and Basis
for Specification for Cellulose Acetate Butyrate Molding and
Extrusion Compounds (CAB)
|
|
D789-19
|
Standard Test Method for Determination of
Relative Viscosity of Concentrated Polyamide (PA) Solutions
|
|
D790-17
|
Standard Test Methods for Flexural
Properties of Unreinforced and Reinforced Plastics and Electrical
Insulating Materials
|
|
D792-20
|
Standard Test Methods for Density and
Specific Gravity (Relative Density) of Plastics by Displacement
|
|
D883-24
|
Standard Terminology Relating to
Plastics
|
|
D955-21
|
Standard Test Method of Measuring
Shrinkage from Mold Dimensions of Thermoplastics
|
|
D1003-21
|
Standard Test Method for Haze and
Luminous Transmittance of Transparent Plastics
|
|
D1149-18
|
Standard Test Methods for Rubber
Deterioration´Cracking in an Ozone Controlled Environment
|
|
D1203-23
|
Standard Test Methods for Volatile Loss
from Plastics Using Activated Carbon Methods
|
|
D1238-23a
|
Standard Test Method for Melt Flow Rates
of Thermoplastics by Extrusion Plastometer (Includes all amendments
and changes 12/6/2023).
|
|
D1525-17e1
|
Standard Test Method for Vicat Softening
Temperature of Plastics (Includes all amendments and changes
9/15/2017).
|
|
D1562-22
|
Standard Classification System and Basis
for Specification for Cellulose Acetate Propionate Molding and
Extrusion Compounds (CAP)
|
|
D1600-18
|
Standard Terminology for Abbreviated
Terms Relating to Plastics (Withdrawn 2024)
|
|
D1693-21
|
Standard Test Method for Environmental
Stress-Cracking of Ethylene Plastics
|
|
D1784-20
|
Standard Classification System and Basis
for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds
and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
|
|
D1822-21
|
Standard Test Method for Determining the
Tensile-Impact Resistance of Plastics
|
|
D1929-23
|
Standard Test Method for Determining
Ignition Temperature of Plastics
|
|
D4329-21
|
Standard Practice for Fluorescent
Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
|
|
D3965-21
|
Standard Classification System and Basis
for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS)
Materials for Pipe and Fittings
|
|
Department of Transportation
|
Federal Motor Vehicle Safety Standard No.
302
|
|
F372-99
|
Standard Test Method for Water Vapor
Transmission Rate of Flexible Barrier Materials Using an Infrared
Detection Technique
|
|
D5857-17(2024)
|
Standard Specification for Polypropylene
Injection and Extrusion Materials Using ISO Protocol and
Methodology
|
|
D5927-17
|
Standard Classification System for and
Basis for Specifications for Thermoplastic Polyester (TPES)
Injection and Extrusion Materials Based on ISO Test Methods
|
|
D5990-20a
|
Standard Classification System and Basis
for Polyketone Injection Molding and Extrusion Materials (PK)
(Includes all amendments and changes 9/10/2020).
|
|
D6314-98
|
Standard Specification for Fluorocarbon
Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials
(Withdrawn 2002)
|
|
D6338-17
|
Standard Classification System for Highly
Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM
Standard Test Methods
|
|
D4895-18(2023)
|
Standard Specification for
Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
|
|
D4976-12a(2020)
|
Standard Specification for Polyethylene
Plastics Molding and Extrusion Materials (Includes all amendments
and changes 11/17/2022).
|
|
D4745-19
|
Standard Classification System and Basis
for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding
and Extrusion Materials Using ASTM Methods
|
|
D4986-22
|
Standard Test Method for Horizontal
Burning Characteristics of Cellular Polymeric Materials
|
|
D5021-00
|
Standard Specification for Thermoplastic
Elastomer-Chlorinated Ethylene Alloy (TECEA) (Withdrawn 2007)
|
|
D5046-98
|
Standard Specification for Fully
Crosslinked Elastomeric Alloys (FCEAs) (Withdrawn 2000)
|
|
D5048-20a
|
Standard Test Method for Measuring the
Comparative Burning Characteristics and Resistance to Burn-Through
of Solid Plastics Using a 125-mm Flame (Includes all amendments and
changes 9/11/2020).
|
|
D5132-20
|
Standard Test Method for Horizontal
Burning Rate of Polymeric Materials Used in Occupant Compartments
of Motor Vehicles
|
|
D5138-23
|
Standard Classification System and Basis
for Specification for Liquid Crystal Polymers Molding and Extrusion
Materials (LCP)
|
|
D5203-07
|
Standard Specification for Polyethylene
Plastics Molding and Extrusion Materials from Recycled
Post-Consumer (HDPE) Sources (Withdrawn 2016)
|
|
D5204-22
|
Standard Classification System and Basis
for Specification for Polyamide-Imide (PAI) Molding and Extrusion
Materials
|
|
D5205-16
|
Standard Classification System and Basis
for Specification for Polyetherimide (PEI) Materials
|
|
D5279-21
|
Standard Test Method for Plastics:
Dynamic Mechanical Properties: In Torsion
|
|
D5336-22
|
Standard Classification System and Basis
for Specification for Polyphthalamide (PPA) Injection Molding
Materials
|
|
D4396-22
|
Standard Specification for Rigid
Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride)
(CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure
Applications
|
|
D4474-00
|
Standard Classification System for
Styrenic Thermoplastic Elastomer Injection Molding and Extrusion
Materials (TES) (Withdrawn 2008)
|
|
D4549-15(2021)
|
Standard Classification System and Basis
for Specification for Polystyrene and Rubber-Modified Polystyrene
Molding and Extrusion Materials (PS)
|
|
D4617-03
|
Standard Classification System for
Phenolic Compounds (PF) (Withdrawn 2012)
|
|
D4634-16(2022)
|
Standard Classification System and Basis
for Specification for Styrene-Maleic Anhydride Molding and
Extrusion Materials (S/MA)
|
|
D4673-23
|
Standard Classification System for and
Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS)
Plastics and Alloys Molding and Extrusion Materials
|
|
D4364-13(2022)e1
|
Standard Practice for Performing Outdoor
Accelerated Weathering Tests of Plastics Using Concentrated
Sunlight (Includes all amendments and changes 2/25/2022).
|
|
D5476-99
|
Standard Classification System for
Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005)
|
|
D5575-18(2023)
|
Standard Classification System for
Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated
Monomers
|
|
D5593-99e1
|
Standard Classification for Thermoplastic
Elastomers-Olefinic (TEO) (Withdrawn 2005)
|
|
D5628-18
|
Standard Test Method for Impact
Resistance of Flat, Rigid Plastic Specimens by Means of a Falling
Dart (Tup or Falling Mass)
|
|
D5630-22
|
Standard Test Method for Ash Content in
Plastics
|
|
D5676-99
|
Standard Specification for Recycled
Polystyrene Molding and Extrusion Materials (Withdrawn 2004)
|
|
D4349-22
|
Classification System and Basis for
Specification for Polyphenylene Ether (PPE) Materials
|
|
D4804-23
|
Standard Test Method for Determining the
Flammability Characteristics of Nonrigid Solid Plastics
|
|
D4812-19e1
|
Standard Test Method for Unnotched
Cantilever Beam Impact Resistance of Plastics (Includes all
amendments and changes 5/3/2022).
|
|
D4894-19
|
Standard Specification for
Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion
Materials
|
|
D2116-16(2021)
|
Standard Specification for FEP Resin
Molding and Extrusion Materials
|
|
D2137-11(2018)
|
Standard Test Methods for Rubber
Property´Brittleness Point of Flexible Polymers and Coated
Fabrics
|
|
D2240-15(2021)
|
Standard Test Method for Rubber
Property—Durometer Hardness
|
|
D2287-19
|
Standard Classification System and Basis
for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer
Molding and Extrusion Compounds
|
|
D2288-97(2001)
|
Standard Test Method for Weight Loss of
Plasticizers on Heating (Withdrawn 2010)
|
|
D2565-23
|
Standard Practice for Xenon-Arc Exposure
of Plastics Intended for Outdoor Applications
|
|
D2583-13
|
Standard Test Method for Indentation
Hardness of Rigid Plastics by Means of a Barcol Impressor
|
|
D2584-18
|
Standard Test Method for Ignition Loss of
Cured Reinforced Resins
|
|
D2632-15(2019)
|
Standard Test Method for Rubber
Property´Resilience by Vertical Rebound
|
|
D2843-22
|
Standard Test Method for Density of Smoke
from the Burning or Decomposition of Plastics
|
|
D2863-23
|
Standard Test Method for Measuring the
Minimum Oxygen Concentration to Support Candle-Like Combustion of
Plastics (Oxygen Index)
|
|
D3012-19
|
Standard Test Method for
Thermal-Oxidative Stability of Polypropylene Using a Specimen
Rotator Within an Oven
|
|
D3159-22
|
Standard Specification for Modified ETFE
Fluoropolymer Molding and Extrusion Materials
|
|
D3222-21
|
Standard Specification for Unmodified
Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating
Materials
|
|
D3275-18(2023)
|
Standard Classification System for
E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
|
|
D3307-21
|
Standard Specification for
Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
|
|
D3350-21
|
Standard Specification for Polyethylene
Plastics Pipe and Fittings Materials
|
|
D3418-21
|
Standard Test Method for Transition
Temperatures and Enthalpies of Fusion and Crystallization of
Polymers by Differential Scanning Calorimetry
|
|
D3638-21e1
|
Standard Test Method for Comparative
Tracking Index of Electrical Insulating Materials (Includes all
amendments and changes 2/2/2022).
|
|
D3713-95
|
Standard Test Method for Measuring
Response of Solid Plastics to Ignition by a Small Flame (Withdrawn
2000)
|
|
D3763-23
|
Standard Test Method for High Speed
Puncture Properties of Plastics Using Load and Displacement
Sensors
|
|
D3801-20a
|
Standard Test Method for Measuring the
Comparative Burning Characteristics of Solid Plastics in a Vertical
Position (Includes all amendments and changes 9/11/2020).
|
|
D3892-15(2020)
|
Standard Practice for Packaging/Packing
of Plastics
|
|
D5420-21
|
Standard Test Method for Impact
Resistance of Flat, Rigid Plastic Specimen by Means of a Striker
Impacted by a Falling Weight (Gardner Impact)
|
|
D4507-93a
|
Specification for Thermoplastic Polyester
(TPES) Materials (Withdrawn 1999)
|
|
D6339-11(2019)
|
Standard Classification System for and
Basis for Specifications for Syndiotactic Polystyrene Molding and
Extrusion (SPS)
|
|
D6358-19e1
|
Standard Classification System and Basis
for Specification for Poly (Phenylene Sulfide) (PPS) Injection
Molding, Extrusion and Blow Molding Materials Using ISO Methods
(Includes all amendments and changes 7/24/2019).
|
|
D6360-15(2021)
|
Standard Practice for Enclosed Carbon-Arc
Exposures of Plastics
|
|
D6394-21a
|
Standard Classification System for and
Basis for Specification for Sulfone Plastics (SP) (Includes all
amendments and changes 5/13/2021).
|
|
D6778-20
|
Standard Classification System and Basis
for Specification for Polyoxymethylene Molding and Extrusion
Materials (POM)
|
|
D6779-23
|
Standard Classification System for and
Basis of Specification for Polyamide Molding and Extrusion
Materials (PA)
|
|
D6835-23
|
Standard Classification System for
Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials
(TEEE)
|
|
D6869-17
|
Standard Test Method for Coulometric and
Volumetric Determination of Moisture in Plastics Using the Karl
Fischer Reaction (the Reaction of Iodine with Water)
|
|
D7209-06
|
Standard Guide for Waste Reduction,
Resource Recovery, and Use of Recycled Polymeric Materials and
Products (Withdrawn 2015)
|
|
E29-22
|
Standard Practice for Using Significant
Digits in Test Data to Determine Conformance with
Specifications
|
|
E84-23d
|
Standard Test Method for Surface Burning
Characteristics of Building Materials (Includes all amendments and
changes 1/29/2024).
|
|
E96/E96M-23
|
Standard Test Methods for Gravimetric
Determination of Water Vapor Transmission Rate of Materials
|
|
E104-20a
|
Standard Practice for Maintaining
Constant Relative Humidity by Means of Aqueous Solutions (Includes
all amendments and changes 12/21/2020).
|
|
E119-22
|
Standard Test Methods for Fire Tests of
Building Construction and Materials
|
|
E162-22
|
Standard Test Method for Surface
Flammability of Materials Using a Radiant Heat Energy Source
|
|
E662-21ae1
|
Standard Test Method for Specific Optical
Density of Smoke Generated by Solid Materials (Includes all
amendments and changes 9/16/2021).
|
|
E1354-23
|
Standard Test Method for Heat and Visible
Smoke Release Rates for Materials and Products Using an Oxygen
Consumption Calorimeter
|
|
D3985-17
|
Standard Test Method for Oxygen Gas
Transmission Rate Through Plastic Film and Sheeting Using a
Coulometric Sensor
|
|
D4020-18
|
Standard Specification for
Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion
Materials
|
|
D3935-21
|
Standard Classification System and Basis
for Specification for Polycarbonate (PC) Unfilled and Reinforced
Material
|
|
D4066-13(2019)
|
Standard Classification System for Nylon
Injection and Extrusion Materials (PA)
|
|
D4067-23
|
Standard Classification System and Basis
for Specification for Reinforced and Filled Poly(Phenylene Sulfide)
(PPS) Injection Molding and Extrusion Materials Using ASTM
Methods
|
|
D4101-24
|
Standard Classification System and Basis
for Specification for Polypropylene Injection and Extrusion
Materials
|
|
D4181-00
|
Standard Classification for Acetal (POM)
Molding and Extrusion Materials (Withdrawn 2005)
|
|
D4203-17
|
Standard Specification for and Basis for
Specifications for Styrene-Acrylonitrile (SAN) Injection and
Extrusion Materials
|
|
D4216-22
|
Standard Specification for Rigid
Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated
Poly(Vinyl Chloride) (CPVC) Building Products Compounds
|
Cookies
