Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM Volume 05.03 - Petroleum Products and Lubricants (III): D6138 - D6971
Přeložit název
PUBLIKACE vydána dne 1.3.2021
Dostupnost | Vyprodáno |
Cena | NA DOTAZ bez DPH |
NA DOTAZ |
Označení: ASTM Volume 05.03 - Petroleum Products and Lubricants (III): D6138 - D6971
Počet stran: 2092
Přibližná hmotnost: 6307 g (13.90 liber)
Datum vydání: 1.3.2021
Země: Americká publikace
These five volumes provide over 750 standards that cover fuels, oils, lubricants, and solvents. They address alternative diesel fuels and diesel fuel blend components, (including biodiesel), ethanol, and ethanol blends. They also feature standards for evaluating the properties of motor, diesel, automotive spark-ignition engine fuel, ethanol, aviation fuels, solvent hexane, and naphtha.Standards cover carbon residue, viscosity, cloud point, density, flash point, and sulfur content. Other subjects include natural and liquefied petroleum, pure light hydrocarbons, crude petroleum, wax and petrolatum, and hydraulic fluids. Also includes standards for evaluating the properties of film lubricants, lubricating greases, lubricating oil, used oils, cutting oils, turbine oils, and engine tests (octane and cetane numbers).
D6469-20 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
D6470-99(2020) | Standard Test Method for Salt in Crude Oils (Potentiometric Method) |
D6481-14(2019) | Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy |
D6482-06(2016) | Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method) |
D6514-03(2019)e1 | Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils |
D6546-15 | Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications |
D6547-16 | Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple |
D6549-06(2021) | Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit) |
D6550-20 | Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography |
D6553-00(2016) | Standard Test Method for Coolant Compatibility of Way Lubricants |
D6557-18 | Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils |
D6558-00A(2015)e1 | Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks |
D6559-00A(2016)e1 | Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks |
D6560-17 | Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products |
D6584-17 | Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography |
D6591-19 | Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection |
D6593-18 | Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions |
D6594-20 | Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135?°C |
D6595-17 | Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry |
D6596-00(2021) | Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
D6615-15a(2019) | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
D6616-21 | Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100?°C |
D6617-21 | Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material |
D6618-16 | Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine |
D6624-20 | Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data |
D6666-20 | Standard Guide for Evaluation of Aqueous Polymer Quenchants |
D6667-21 | Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence |
D6668-01(2016) | Standard Test Method for Discrimination Between Flammability Ratings of F?=?0 and F?=?1 |
D6681-17 | Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure |
D6708-21 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material |
D6709-21 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine) |
D6710-17 | Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil |
D6728-16(2021) | Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry |
D6729-20 | Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography |
D6730-21 | Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography |
D6731-18 | Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer |
D6732-04(2020) | Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry |
D6733-01(2020) | Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography |
D6743-20 | Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids |
D6744-06(2017)e1 | Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique |
D6745-11(2015) | Standard Test Method for Linear Thermal Expansion of Electrode Carbons |
D6748-02a(2017) | Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer) |
D6749-02(2018) | Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method) |
D6750-19 | Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4?% Fuel Sulfur) and 1N Procedure (0.04?% Fuel Sulfur) |
D6751-20a | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels |
D6756-17 | Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer |
D6791-11(2017)e1 | Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke |
D6792-21 | Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories |
D6794-20 | Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6?h) Heating Time |
D6795-19a | Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30?min) Heating Time |
D6810-21 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry |
D6812-04a(2019) | Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines |
D6821-20a | Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer |
D6822-12b(2017) | Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method |
D6823-08(2013) | Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils |
D6824-13(2018) | Standard Test Method for Determining Filterability of Aviation Turbine Fuel |
D6837-13 | Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine |
D6839-21a | Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, Benzene, and Toluene in Spark Ignition Engine Fuels by Multidimensional Gas Chromatography |
D6849-13 | Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods |
D6891-21 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine |
D6892-03(2020) | Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method) |
D6894-13 | Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine |
D6895-17 | Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100?°C |
D6896-20a | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature |
D6897-16 | Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method) |
D6898-03(2016) | Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig |
D6922-13(2018) | Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils |
D6923-18 | Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure |
D6969-17 | Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis |
D6970-03(2019) | Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis |
D6971-09(2014) | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
D6973-14(2019) | Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump |
D6974-20 | Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
D6984-18 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine |
D6986-03(2020) | Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures) |
D6987/D6987M-13a | Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine |
D7038-21a | Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants |
D7039-15a(2020) | Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry |
D7040-04(2020) | Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry |
D7041-16(2021) | Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection |
D7042-21 | Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity) |
D7043-17 | Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump |
D7044-15 | Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids |
D7058-19 | Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer |
D7059-09(2017) | Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography |
D7060-20 | Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method) |
D7061-19e1 | Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device |
D7094-17a | Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester |
D7095-17 | Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip |
D7096-19 | Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography |
D7097-19 | Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT |
D7098-08(2015) | Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B |
D7109-20a | Standard Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles |
D7110-21 | Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures |
D7111-16(2021) | Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
D7112-19 | Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection) |
D7152-11(2016)e1 | Standard Practice for Calculating Viscosity of a Blend of Petroleum Products |
D7153-15e1 | Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method) |
D7154-15 | Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method) |
D7155-20 | Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
D7156-19 | Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine |
D7157-18 | Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection) |
D7169-20e1 | Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography |
D7171-20 | Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy |
D7212-13(2018) | Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter |
D7213-15(2019) | Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100?°C to 615?°C by Gas Chromatography |
D7214-20 | Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation |
D7215-16 | Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels |
D7216-20a | Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers |
D7217-16 | Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
D7220-12(2017) | Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry |
D7224-20 | Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer |
D7235-21 | Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices |
D7236-16a(2021) | Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method) |
D7260-20 | Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants |
D7261-17 | Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer |
D7278-16 | Standard Guide for Prediction of Analyzer Sample System Lag Times |
D7279-20 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer |
D7280-20 | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration |
D7303-17 | Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry |
D7317-07(2019) | Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method) |
D7318-19e1 | Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration |
D7319-17 | Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography |
D7320-18 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine |
D7321-18a | Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration |
D7328-17 | Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection |
D7342-20 | Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test) |
D7343-20 | Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants |
D7344-17a | Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method) |
D7345-17 | Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method) |
D7346-15(2021) | Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels |
D7347-15 | Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography |
D7371-14 | Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method) |
D7372-21 | Standard Guide for Analysis and Interpretation of Proficiency Test Program Results |
D7397-21 | Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method) |
D7398-11(2021) | Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100?°C to 615?°C by Gas Chromatography |
Poslední aktualizace: 26.04.2024 (Počet položek: 2 896 057)
© Copyright 2024 NORMSERVIS s.r.o.