Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection
Přeložit název
NORMA vydána dne 1.7.2021
Označení normy: ASTM D7041-16(2021)
Datum vydání normy: 1.7.2021
Kód zboží: NS-1030576
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
flame photometric detector, gas chromatography, total sulfur,, ICS Number Code 75.160.20 (Liquid fuels)
Significance and Use | ||||||||||
4.1?This test method can be used to determine total sulfur levels in process feeds and finished products that fall within the scope of this test method. 4.2?Low levels of sulfur in process feed stocks can poison expensive catalysts used in petroleum refining processes. This test method can be used to monitor sulfur levels in these feedstocks. |
||||||||||
1. Scope | ||||||||||
1.1?This test method covers the determination of total sulfur in liquid hydrocarbons with a final boiling point less than 450 ?C by gas chromatography using a flame photometric detector. 1.2?This test method is applicable for total sulfur levels from 0.5 mg/kg S to 100 mg/kg S. Note 1:?The pooled limit of quantification (PLOQ) derived from
the 2002 interlaboratory cooperative test program was determined to
be 1 mg/kg S.
Note 2:?Samples can also be tested at other total sulfur
levels, but the precision statements may not apply.
1.3?The values stated in SI units are to be regarded as standard. 1.4?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||
2. Referenced Documents | ||||||||||
|
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.