Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Linear Thermal Expansion of Electrode Carbons
Automaticky přeložený název:
Standardní zkušební metoda pro lineární tepelné roztažnosti elektrody Carbons
NORMA vydána dne 1.10.2015
Označení normy: ASTM D6745-11(2015)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2015
Kód zboží: NS-622452
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
aluminum industry, anode, carbon, cathode, coefficient of thermal expansion (CTE), thermal expansion,, ICS Number Code 19.060 (Mechanical testing)
Significance and Use | ||
5.1 Coefficients of linear thermal expansion are used for design and quality control purposes and to determine dimensional changes of parts and components (such as carbon anodes, cathodes, and so forth) when subjected to varying temperatures. |
||
1. Scope | ||
1.1 This test method covers the determination of the coefficient of linear thermal expansion (CTE) for carbon anodes and cathodes used in the aluminum industry, in baked form, by use of a vitreous silica dilatometer. 1.2 The applicable temperature range for this test method for research purposes is ambient to 1000 °C. The recommended maximum use temperature for product evaluation is 500 °C. 1.3 This test method and procedure is based on Test Method E228, which is a generic all-encompassing method. Specifics dictated by the nature of electrode carbons and the purposes for which they are used are addressed by this procedure. 1.4 Electrode carbons in the baked form will only exhibit primarily reversible dimensional changes when heated. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||
2. Referenced Documents | ||
|
Poslední aktualizace: 29.04.2024 (Počet položek: 2 896 215)
© Copyright 2024 NORMSERVIS s.r.o.