Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM Volume 03.01 - Metals - Mechanical Testing; Elevated and Low - Temperature Tests; Metallography
ASTM Volume 03.01 - Metals - Mechanical Testing; Elevated and Low - Temperature Tests; Metallography
Přeložit název
PUBLIKACE vydána dne 1.7.2021
| Dostupnost | Vyprodáno |
| Cena | NA DOTAZ bez DPH |
| NA DOTAZ |
Informace o produktu:
Označení: ASTM Volume 03.01 - Metals - Mechanical Testing; Elevated and Low - Temperature Tests; Metallography
Počet stran: 1830
Přibližná hmotnost: 5521 g (12.17 liber)
Datum vydání: 1.7.2021
Země: Americká publikace
Anotace textu normy :
Volume 03.01 covers tests and practices for mechanical testing procedures, including: machine calibration, bend and flexure testing, compression, ductility, formability, elastic properties, impact, linear thermal expansion, shear, torsion, residual stress, tension testing, structural films for MEMS, and electronic applications. Other standards cover fatigue and fracture testing of materials, including crack tip opening displacement (CTOD), fracture toughness measurement, and linear elastic plane-strain fracture toughness of metallic materials. Also featured are metallography tests and practices that define standard optical, electron, and X-ray procedures for determining the constituents and structure of metals and alloys.
Table of Contents
| E3-11(2017) | Standard Guide for Preparation of Metallographic Specimens |
| E4-21 | Standard Practices for Force Calibration and Verification of Testing Machines |
| E6-15e4 | Standard Terminology Relating to Methods of Mechanical Testing |
| E7-17 | Standard Terminology Relating to Metallography |
| E8/E8M-21 | Standard Test Methods for Tension Testing of Metallic Materials |
| E9-19 | Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature |
| E10-18 | Standard Test Method for Brinell Hardness of Metallic Materials |
| E18-20 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| E21-20 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
| E23-18 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
| E45-18a | Standard Test Methods for Determining the Inclusion Content of Steel |
| E74-18e1 | Standard Practices for Calibration and Verification for Force-Measuring Instruments |
| E81-96(2017) | Standard Test Method for Preparing Quantitative Pole Figures |
| E82/E82M-14(2019) | Standard Test Method for Determining the Orientation of a Metal Crystal |
| E83-16 | Standard Practice for Verification and Classification of Extensometer Systems |
| E92-17 | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
| E103-17 | Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials |
| E110-14 | Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers |
| E111-17 | Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus |
| E112-13 | Standard Test Methods for Determining Average Grain Size |
| E132-17 | Standard Test Method for Poisson’s Ratio at Room Temperature |
| E139-11(2018) | Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials |
| E140-12B(2019)e1 | Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness |
| E143-20 | Standard Test Method for Shear Modulus at Room Temperature |
| E190-21 | Standard Test Method for Guided Bend Test for Ductility of Welds |
| E208-20 | Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels |
| E209-18 | Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates |
| E238-17a | Standard Test Method for Pin-Type Bearing Test of Metallic Materials |
| E251-20a | Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages |
| E290-14 | Standard Test Methods for Bend Testing of Material for Ductility |
| E292-18 | Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials |
| E328-21 | Standard Test Methods for Stress Relaxation for Materials and Structures |
| E340-15 | Standard Practice for Macroetching Metals and Alloys |
| E345-16 | Standard Test Methods of Tension Testing of Metallic Foil |
| E381-20 | Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
| E384-17 | Standard Test Method for Microindentation Hardness of Materials |
| E399-20a | Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials |
| E407-07(2015)e1 | Standard Practice for Microetching Metals and Alloys |
| E436-03(2021) | Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels |
| E466-21 | Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
| E467-21 | Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System |
| E468-18 | Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials |
| E517-19 | Standard Test Method for Plastic Strain Ratio r for Sheet Metal |
| E561-20 | Standard Test Method for KR Curve Determination |
| E562-19e1 | Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count |
| E604-18 | Standard Test Method for Dynamic Tear Testing of Metallic Materials |
| E606/E606M-21 | Standard Test Method for Strain-Controlled Fatigue Testing |
| E633-21 | Standard Guide for Use of Thermocouples in Elevated-Temperature Mechanical Testing |
| E643-15 | Standard Test Method for Ball Punch Deformation of Metallic Sheet Material |
| E646-16 | Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials |
| E647-15e1 | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
| E739-10(2015) | Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (?-N) Fatigue Data |
| E740/E740M-03(2016) | Standard Practice for Fracture Testing with Surface-Crack Tension Specimens |
| E766-14(2019) | Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope |
| E768-99(2018) | Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel |
| E837-20 | Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method |
| E855-21 | Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading |
| E883-11(2017) | Standard Guide for Reflected–Light Photomicrography |
| E915-19 | Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement |
| E930-18 | Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size) |
| E975-13 | Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation |
| E986-04(2017) | Standard Practice for Scanning Electron Microscope Beam Size Characterization |
| E1012-19 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
| E1049-85(2017) | Standard Practices for Cycle Counting in Fatigue Analysis |
| E1077-14(2021) | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| E1180-08(2014) | Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation |
| E1181-02(2015) | Standard Test Methods for Characterizing Duplex Grain Sizes |
| E1221-12A(2018)e1 | Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels |
| E1237-20 | Standard Guide for Installing Bonded Resistance Strain Gages |
| E1245-03(2016) | Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis |
| E1268-19 | Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures |
| E1304-97(2020) | Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials |
| E1319-21 | Standard Guide for High-Temperature Static Strain Measurement |
| E1351-01(2020) | Standard Practice for Production and Evaluation of Field Metallographic Replicas |
| E1382-97(2015) | Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis |
| E1426-14(2019)e1 | Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques |
| E1450-16 | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
| E1457-19e1 | Standard Test Method for Measurement of Creep Crack Growth Times in Metals |
| E1508-12a(2019) | Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy |
| E1558-09(2014) | Standard Guide for Electrolytic Polishing of Metallographic Specimens |
| E1561-20 | Standard Practice for Analysis of Strain Gage Rosette Data |
| E1681-03(2020) | Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
| E1685-20 | Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique |
| E1820-20b | Standard Test Method for Measurement of Fracture Toughness |
| E1823-20b | Standard Terminology Relating to Fatigue and Fracture Testing |
| E1856-13 | Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines |
| E1875-20a | Standard Test Method for Dynamic Youngs Modulus, Shear Modulus, and Poissons Ratio by Sonic Resonance |
| E1876-15 | Standard Test Method for Dynamic Youngs Modulus, Shear Modulus, and Poissons Ratio by Impulse Excitation of Vibration |
| E1920-03(2014) | Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings |
| E1921-21 | Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range |
| E1928-13(2019) | Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing |
| E1942-98(2018)e1 | Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing |
| E1949-21 | Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages |
| E1951-14(2019) | Standard Guide for Calibrating Reticles and Light Microscope Magnifications |
| E2014-17 | Standard Guide on Metallographic Laboratory Safety |
| E2015-04(2014) | Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination |
| E2109-01(2014) | Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings |
| E2142-08(2015) | Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope |
| E2207-15(2021) | Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens |
| E2208-02(2018)e1 | Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems |
| E2218-15 | Standard Test Method for Determining Forming Limit Curves |
| E2244-11(2018) | Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer |
| E2245-11(2018) | Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer |
| E2246-11(2018) | Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer |
| E2248-18 | Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens |
| E2283-08(2019) | Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features |
| E2298-18 | Standard Test Method for Instrumented Impact Testing of Metallic Materials |
| E2309/E2309M-20 | Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines |
| E2368-10(2017) | Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
| E2428-15a | Standard Practice for Calibration and Verification of Torque Transducers |
| E2443-05(2018)e1 | Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets |
| E2444-11(2018) | Standard Terminology Relating to Measurements Taken on Thin, Reflecting Films |
| E2448-18 | Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials |
| E2472-12(2018)e1 | Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions |
| E2546-15 | Standard Practice for Instrumented Indentation Testing |
| E2567-16a | Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis |
| E2624-17 | Standard Practice for Torque Calibration of Testing Machines |
| E2627-13(2019) | Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials |
| E2658-15 | Standard Practices for Verification of Speed for Material Testing Machines |
| E2712-15 | Standard Test Methods for Bulge-Forming Superplastic Metallic Sheet |
| E2714-13(2020) | Standard Test Method for Creep-Fatigue Testing |
| E2760-19e1 | Standard Test Method for Creep-Fatigue Crack Growth Testing |
| E2789-10(2015) | Standard Guide for Fretting Fatigue Testing |
| E2818-11(2019) | Standard Practice for Determination of Quasistatic Fracture Toughness of Welds |
| E2860-20 | Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels |
| E2899-19e1 | Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending |
| E2948-16a | Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire |
| E3039-20 | Standard Test Method for Determination of Crack-Tip-Opening Angle of Ferritic Steels Using DWTT-Type Specimens |
| E3076-18 | Standard Practice for Determination of the Slope in the Linear Region of a Test Record |
| E3097-17 | Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys |
| E3098-17 | Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys |
| E3246-21 | Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials |
Doporučujeme:
