Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for High-Temperature Static Strain Measurement
Přeložit název
NORMA vydána dne 1.2.2021
Označení normy: ASTM E1319-21
Poznámka: NEPLATNÁ
Datum vydání normy: 1.2.2021
Kód zboží: NS-1022057
Počet stran: 11
Přibližná hmotnost: 33 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
extensometer, high temperature testing, strain gage-adverse environment, strain gage-capacitive, strain gage-free filament, strain gage-high temperature, strain gage-installation, strain gage-selection, strain gage-weldable, stress,, ICS Number Code 19.060 (Mechanical testing)
Significance and Use | ||
4.1?The use of this guide is voluntary and is intended for use as a procedures guide for selection and application of specific types of strain gages for high-temperature installations. No attempt is made to restrict the type of strain gage types or concepts to be chosen by the user. The provisions of this guide may be invoked in specifications and procedures by specifying those that shall be considered mandatory for the purpose of the specific application. When so invoked, the user shall include in the work statement a notation that provisions of this guide shown as recommendation shall be considered mandatory for the purposes of the specification or procedure concerned, and shall include a statement of any exceptions to or modifications of the affected provisions of this guide. |
||
1. Scope | ||
1.1?This guide covers the selection and application of strain gages for the measurement of static strain up to and including the temperature range from 425 ?C to 650 ?C (800 ?F to 1200 ?F). This guide reflects some state-of-the-art techniques in high-temperature strain measurement. 1.2?This guide assumes that the user is familiar with the use of bonded strain gages and associated signal conditioning circuits and instrumentation as discussed in 1.3?The devices and techniques described in this guide can sometimes be applicable at temperatures above and below the range noted, and for making dynamic strain measurements at high temperatures with proper precautions. The strain gage manufacturer should be consulted for recommendations and details of such applications. 1.4?The references are a part of this guide to the extent specified in the text. 1.5?The values stated in metric (SI) units are to be regarded as the standard. The values given in parentheses are for informational purposes only. 1.6?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||
2. Referenced Documents | ||
|
Poslední aktualizace: 29.08.2024 (Počet položek: 2 344 943)
© Copyright 2024 NORMSERVIS s.r.o.