Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM Volume 02.05 - Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products
ASTM Volume 02.05 - Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products
Přeložit název
PUBLIKACE vydána dne 1.5.2021
| Dostupnost | Vyprodáno |
| Cena | NA DOTAZ bez DPH |
| NA DOTAZ |
Informace o produktu:
Označení: ASTM Volume 02.05 - Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products
Počet stran: 1116
Přibližná hmotnost: 3379 g (7.45 liber)
Datum vydání: 1.5.2021
Země: Americká publikace
Anotace textu normy :
Under the heading of metallic and inorganic coatings, specifications establish requirements for electrodeposited coatings of cadmium, tin, and mechanically-deposited zinc. This volume includes tests for measuring the properties of anodically-coated aluminum; determining coating thickness and corrosion; and electroforming, electroplating, and surface preparation.Volume 02.05 features standards for metal powders and metal powder products. It includes test methods and specifications that deal with base metal powders, cemented carbides, refractory metal powders, density, flow rate, hardness, and particulate size. This volume also features standards for powder metallurgy (P/M) and metal injection molded (MIM) structural parts.
Table of Contents
| B136-84(2018) | Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum |
| B137-95(2014) | Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum |
| B177/B177M-11(2017) | Standard Guide for Engineering Chromium Electroplating |
| B183-18 | Standard Practice for Preparation of Low-Carbon Steel for Electroplating |
| B200-85(2015) | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| B201-80(2019) | Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces |
| B212-17 | Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel |
| B213-20 | Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel |
| B214-16 | Standard Test Method for Sieve Analysis of Metal Powders |
| B215-20 | Standard Practices for Sampling Metal Powders |
| B242-99(2020) | Standard Guide for Preparation of High-Carbon Steel for Electroplating |
| B243-20 | Standard Terminology of Powder Metallurgy |
| B244-09(2021) | Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments |
| B252-92(2020) | Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings |
| B253-11(2017) | Standard Guide for Preparation of Aluminum Alloys for Electroplating |
| B254-92(2020)e1 | Standard Practice for Preparation of and Electroplating on Stainless Steel |
| B276-05(2015) | Standard Test Method for Apparent Porosity in Cemented Carbides |
| B281-88(2019)e1 | Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings |
| B294-17 | Standard Test Method for Hardness Testing of Cemented Carbides |
| B311-17 | Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity |
| B312-20 | Standard Test Method for Green Strength of Specimens Compacted from Metal Powders |
| B319-91(2020) | Standard Guide for Preparation of Lead and Lead Alloys for Electroplating |
| B320-60(2019) | Standard Practice for Preparation of Iron Castings for Electroplating |
| B322-99(2020)e1 | Standard Guide for Cleaning Metals Prior to Electroplating |
| B329-20 | Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter |
| B330-20 | Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability |
| B331-20 | Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction |
| B343-92a(2020) | Standard Practice for Preparation of Nickel for Electroplating with Nickel |
| B368-21 | Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
| B374-06(2019) | Standard Terminology Relating to Electroplating |
| B380-97(2018) | Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure |
| B406-96(2021) | Standard Test Method for Transverse Rupture Strength of Cemented Carbides |
| B417-18 | Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel |
| B438-21 | Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated) |
| B439-21 | Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated) |
| B449-93(2015) | Standard Specification for Chromates on Aluminum |
| B456-17 | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium |
| B457-67(2018) | Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum |
| B480-88(2017) | Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating |
| B481-68(2019) | Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating |
| B482-85(2019) | Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating |
| B487-20 | Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section |
| B488-18 | Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses |
| B489-85(2018) | Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals |
| B490-09(2021) | Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits |
| B499-09(2021)e1 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals |
| B504-90(2017) | Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method |
| B507-14(2021) | Standard Practice for Design of Articles to Be Electroplated on Racks |
| B527-20 | Standard Test Method for Tap Density of Metal Powders and Compounds |
| B528-16(2020)e1 | Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens |
| B530-09(2021) | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates |
| B532-85(2021) | Standard Specification for Appearance of Electroplated Plastic Surfaces |
| B533-85(2019) | Standard Test Method for Peel Strength of Metal Electroplated Plastics |
| B537-70(2019) | Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure |
| B545-13(2021) | Standard Specification for Electrodeposited Coatings of Tin |
| B555-86(2018) | Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test |
| B556-90(2018) | Standard Guide for Measurement of Thin Chromium Coatings by Spot Test |
| B558-79(2019) | Standard Practice for Preparation of Nickel Alloys for Electroplating |
| B567-98(2021) | Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
| B568-98(2021) | Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry |
| B571-18 | Standard Practice for Qualitative Adhesion Testing of Metallic Coatings |
| B578-87(2015) | Standard Test Method for Microhardness of Electroplated Coatings |
| B579-73(2015) | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| B580-79(2019) | Standard Specification for Anodic Oxide Coatings on Aluminum |
| B595-21 | Standard Specification for Materials for Aluminum Powder Metallurgy (PM) Structural Parts |
| B602-88(2016) | Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings |
| B604-91(2019) | Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
| B605-95a(2015) | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| B607-15 | Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use |
| B610-19 | Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction |
| B629-77(2019) | Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating |
| B630-88(2017) | Standard Practice for Preparation of Chromium for Electroplating with Chromium |
| B633-19 | Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel |
| B634-14a | Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use |
| B635-00(2015) | Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| B636/B636M-15 | Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer |
| B650-95(2018) | Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates |
| B651-83(2019) | Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope |
| B657-18 | Standard Guide for Metallographic Identification of Microstructure in Cemented Carbides |
| B659-90(2021) | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| B665-19 | Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides |
| B678-86(2017) | Standard Test Method for Solderability of Metallic-Coated Products |
| B679-98(2015) | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| B680-80(2019) | Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution |
| B689-97(2018)e1 | Standard Specification for Electroplated Engineering Nickel Coatings |
| B695-04(2016) | Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel |
| B696-00(2015) | Standard Specification for Coatings of Cadmium Mechanically Deposited |
| B697-88(2016) | Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings |
| B699-86(2021)e1 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| B700-20 | Standard Specification for Electrodeposited Coatings of Silver for Engineering Use |
| B703-17 | Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter |
| B727-04(2020) | Standard Practice for Preparation of Plastics Materials for Electroplating |
| B733-15 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| B734-97(2018) | Standard Specification for Electrodeposited Copper for Engineering Uses |
| B748-90(2016) | Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope |
| B761-17 | Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation |
| B762-90(2016) | Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings |
| B764-04(2021) | Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test) |
| B765-03(2018) | Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings |
| B766-86(2015) | Standard Specification for Electrodeposited Coatings of Cadmium |
| B767-88(2016) | Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures |
| B771-11(2017) | Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides |
| B783-19 | Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts |
| B795-20 | Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials |
| B796-20 | Standard Test Method for Nonmetallic Inclusion Content of Ferrous Powders Intended for Powder Forging (PF) Applications |
| B797-20 | Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts |
| B809-95(2018) | Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”) |
| B816-00(2021) | Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited |
| B821-10(2016) | Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis |
| B822-20 | Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering |
| B823-20 | Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts |
| B832-93(2018) | Standard Guide for Electroforming with Nickel and Copper |
| B839-04(2014) | Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method |
| B840-15 | Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits |
| B841-18 | Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits |
| B842-99(2016) | Standard Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits |
| B848-15 | Standard Specification for Powder Forged (PF) Ferrous Materials |
| B849-02(2019) | Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement |
| B850-98(2015) | Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement |
| B851-04(2020) | Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
| B853-16 | Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components |
| B855-17 | Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel |
| B859-21 | Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis |
| B866-95(2018) | Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion |
| B867-95(2018) | Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use |
| B873-17 | Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417 |
| B874-96(2018) | Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process |
| B875-96(2018) | Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process |
| B877-96(2018) | Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method |
| B879-17 | Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys |
| B883-19 | Standard Specification for Metal Injection Molded (MIM) Materials |
| B886-19 | Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides |
| B887-12(2019) | Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides |
| B890-20 | Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry |
| B893-98(2018) | Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications |
| B895-16(2020)e1 | Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution |
| B904-00(2021) | Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding |
| B905-00(2016) | Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test |
| B912-02(2018) | Standard Specification for Passivation of Stainless Steels Using Electropolishing |
| B915-01(2017) | Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating |
| B916-01(2017) | Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal |
| B921-08(2018) | Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
| B922-20 | Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption |
| B923-21 | Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry |
| B925-15 | Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens |
| B930-03(2017) | Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals) |
| B931-14(2018)e1 | Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts |
| B933-20 | Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials |
| B934-21 | Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements |
| B935-20 | Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials |
| B939-21 | Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials |
| B940-05(2020) | Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces |
| B946-11(2016) | Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products |
| B962-17 | Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle |
| B963-17 | Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle |
| B964-16 | Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel |
| B975-18e1 | Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method) |
| B984-12(2020)e1 | Standard Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use |
| B988-18 | Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components |
| B994/B994M-15 | Standard Specification for Nickel-Cobalt Alloy Coating |
| B995-15a | Standard Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test) |
| B999-15 | Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate |
| B1000-21 | Standard Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry |
| C282-20 | Standard Test Method for Acid Resistance of Porcelain Enamels(Citric Acid Spot Test) |
| C283-13(2017) | Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid |
| C285-10(2020) | Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel |
| C286-99(2017) | Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems |
| C346-87(2018) | Standard Test Method for 45-deg Specular Gloss of Ceramic Materials |
| C374-14(2018) | Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods) |
| C375-58(2016) | Standard Classification of Water Used in Milling of Porcelain Enamel |
| C385-58(2018) | Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils |
| C448-88(2021) | Standard Test Methods for Abrasion Resistance of Porcelain Enamels |
| C536-83(2018) | Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing |
| C537-87(2018) | Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage |
| C538-83(2018) | Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels |
| C539-84(2021) | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method |
| C614-20 | Standard Test Method for Alkali Resistance of Porcelain Enamels |
| C632-88(2021) | Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling |
| C633-13(2017) | Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings |
| C660-81(2020) | Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling |
| C664-10(2020) | Standard Test Methods for Thickness of Diffusion Coating |
| C703-72(2021) | Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum |
| C743-87(2018) | Standard Test Method for Continuity of Porcelain Enamel Coatings |
| C756-87(2021) | Standard Test Method for Cleanability of Surface Finishes |
| C774-88(2021) | Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing |
| C839-82(2020) | Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method |
| C872-10(2021) | Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces |
| D1730-09(2020) | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| D1731-09(2020) | Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting |
| D1732-03(2018) | Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting |
| E159-17 | Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss) |
| E194-20 | Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders |
| E1338-09(2021) | Standard Guide for Identification of Metals and Alloys in Computerized Material Property Databases |
| R0001- | Cross Index of Standards for Metal Powders and Metal Powder Products |
Doporučujeme:
