Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
Přeložit název
NORMA vydána dne 1.4.2019
Označení normy: ASTM B481-68(2019)
Datum vydání normy: 1.4.2019
Kód zboží: NS-945894
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
This practice describes preparation processes of titanium and titanium alloys to produce adherent electrodeposits of good quality by electroplating. Not all of the processes that have been reported as successful are described, but rather three basic ones that have had the widest use. The purity of reagents and water that shall be used in each process are given. The three processes consist of (1) cleaning by conventional methods such as vapor degreasing, alkaline cleaning, grinding, or blasting, and (2) activating. The first process involves activation by chemical etching which shall be done in the following order of procedure: pickling, rinsing, etching, rinsing, electroplating, and heat treatment. The second process involves activation by electrochemical etching which shall be done by the same procedure as the first process, without the heat treatment step. The third process involves activation by liquid abrasive blasting which shall be done in the following order of procedure: blasting, electroplating, and heat treatment.
Keywords:
ICS Number Code 77.150.50 (Titanium products)
1. Scope | ||
1.1 This practice describes processes that have been found to be successful in producing adherent electrodeposits of good quality on titanium and certain titanium alloys. Not all of the processes that have been reported as successful are described, but rather three basic ones that have had the widest use. A rather complete listing of the published work on electroplating on titanium is given in the list of references which appear at the end of this practice. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||
2. Referenced Documents | ||
|
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 28.04.2024 (Počet položek: 2 896 137)
© Copyright 2024 NORMSERVIS s.r.o.