Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM B605-95a(2015) 1.3.2015 náhled

Doplňující informace

ASTM B605-95a(2015)

Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy (Includes all amendments And changes 12/2/2022).

Automaticky přeložený název:

Standardní specifikace pro elektrolyticky Coatings Tin - niklové slitiny

NORMA vydána dne 1.3.2015

Jazyk
Provedení	PDF - okamžité stažení - 1 761.10 Kč Tištěné - 1 761.10 Kč
Dostupnost	SKLADEM
Cena	1 761.10 Kč bez DPH
1 761.10 Kč

Informace o normě:

Označení normy: ASTM B605-95a(2015)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.3.2015
Kód zboží: NS-585704
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Kovové povlaky

Anotace textu normy ASTM B605-95a(2015) :

Keywords:
alloys, electrodeposited, tin-nickel, coatings, electrodeposited, nickel alloy, coatings, electrodeposited, tin-nickel alloy, tin-nickel alloy ,, ICS Number Code 25.220.40 (Metallic coatings)

Doplňující informace

1. Scope

1.1 This specification covers the requirements for electrodeposited tin-nickel alloy coatings from aqueous solutions intended for the corrosion protection of fabricated articles of iron, steel, zinc-base alloys, copper, and copper alloys. The composition of the alloy remains constant at 65/35 tin-nickel in spite of wide fluctuations in both composition and operating conditions. The composition corresponds quite closely to an equiatomic ratio, and the process favors the co-deposition of tin and nickel atoms at identical rates.

1.2 This specification does not apply to sheet, strip, or wire in the fabricated form. It also may not be applicable to threaded articles having basic major diameters up to and including 19 mm because of the nonuniformity of thickness that can be expected on fine threads. However, a decision to use the coating on such components may be made by the purchaser.

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

B504-90(2023)	Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
B507-14(2021)	Standard Practice for Design of Articles to Be Electroplated on Racks
B322-99(2020)e1	Standard Guide for Cleaning Metals Prior to Electroplating (Includes all amendments and changes 12/7/2020).
D3951-18(2023)	Standard Practice for Commercial Packaging
B850-98(2022)	Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
B849-02(2023)	Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
B809-95(2018)	Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)
B765-03(2023)	Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
B762-21	Standard Guide of Variables Sampling of Metallic and Inorganic Coatings
B697-88(2021)	Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
B634-14a(2021)	Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use (Includes all amendments and changes 10/27/2021).
B602-21	Standard Guide for Attribute Sampling of Metallic and Inorganic Coatings
B571-23	Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
B568-98(2021)	Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
B567-98(2021)	Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
B281-88(2019)e1	Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings (Includes all amendments and changes 5/14/2019).
B252-92(2020)	Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
B246-15(2021)	Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
B242-99(2020)	Standard Guide for Preparation of High-Carbon Steel for Electroplating
B499-09(2021)e1	Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Includes all amendments and changes 5/18/2021).
B183-18(2022)	Standard Practice for Preparation of Low-Carbon Steel for Electroplating
B487-20	Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
B374-21	Standard Terminology Relating to Electroplating

Podobné normy:

ASTM A1073/A1073M-14..

Historická
1.1.2014

ASTM A123/A123M-13..

Historická
1.11.2013

ASTM A239-14

Historická
1.5.2014

ASTM A385/A385M-11e1..

Historická
1.11.2011

ASTM A428/A428M-10(2..

Historická
1.8.2014

ASTM A630-03(2014)..

Historická
1.10.2014

Doporučujeme:

Aktualizace zákonů

Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.