Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM Volume 08.01 - Plastics (I): C1147 - D3159
Přeložit název
PUBLIKACE vydána dne 1.6.2021
Dostupnost | Vyprodáno |
Cena | NA DOTAZ bez DPH |
NA DOTAZ |
Označení: ASTM Volume 08.01 - Plastics (I): C1147 - D3159
Počet stran: 940
Přibližná hmotnost: 2851 g (6.29 liber)
Datum vydání: 1.6.2021
Země: Americká publikace
These three volumes, 08.01 through 08.03, feature over 480 plastics-related standards, including test methods that establish standard procedures for assessing physical, mechanical, optical, permanence, and thermal properties.Volume 08.03 also covers:
Plastic Building Products—standards deal with plastic siding products, glass-fiber-reinforced polyester plastic panels, and PVC building products.
Reinforced Plastic Piping Systems and Chemical Equipment—covers testing requirements for glass-fiber-reinforced thermosetting resin pipes, fittings, and joints; and establish chemical resistance of thermosetting resins.
C1147-14 | Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics |
D256-10(2018) | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
D494-11(2019) | Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products |
D542-14 | Standard Test Method for Index of Refraction of Transparent Organic Plastics |
D543-20 | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
D570-98(2018) | Standard Test Method for Water Absorption of Plastics |
D618-21 | Standard Practice for Conditioning Plastics for Testing |
D635-18 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
D638-14 | Standard Test Method for Tensile Properties of Plastics |
D648-18 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
D695-15 | Standard Test Method for Compressive Properties of Rigid Plastics |
D696-16 | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between ?30°C and 30°C with a Vitreous Silica Dilatometer |
D704-99(2020) | Standard Specification for Melamine-Formaldehyde Molding Compounds |
D705-99(2020) | Standard Specification for Urea-Formaldehyde Molding Compounds |
D706-20 | Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) |
D707-15 | Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
D731-18 | Standard Test Method for Molding Index of Thermosetting Molding Powder |
D732-17 | Standard Test Method for Shear Strength of Plastics by Punch Tool |
D746-20 | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
D785-08(2015) | Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials |
D787-18 | Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds |
D788-16 | Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds |
D789-19 | Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions |
D790-17 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
D792-20 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
D882-18 | Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
D883-20b | Standard Terminology Relating to Plastics |
D955-21 | Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics |
D957-21 | Standard Practice for Determining Surface Temperature of Molds for Plastics |
D1003-21 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
D1004-21 | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
D1042-12(2017) | Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture |
D1043-16 | Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test |
D1044-19 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser |
D1045-19 | Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics |
D1056-20 | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
D1201-13 | Standard Specification for Thermosetting Polyester Molding Compounds |
D1203-21 | Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods |
D1204-14(2020) | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
D1238-20 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
D1239-14 | Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals |
D1243-15 | Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers |
D1248-16 | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
D1430-17 | Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics |
D1435-20 | Standard Practice for Outdoor Weathering of Plastics |
D1499-13(2021) | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
D1505-18 | Standard Test Method for Density of Plastics by the Density-Gradient Technique |
D1525-17e1 | Standard Test Method for Vicat Softening Temperature of Plastics |
D1562-15 | Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) |
D1593-19 | Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting |
D1600-18 | Standard Terminology for Abbreviated Terms Relating to Plastics |
D1601-18 | Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers |
D1603-20 | Standard Test Method for Carbon Black Content in Olefin Plastics |
D1621-16 | Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
D1622-20 | Standard Test Method for Apparent Density of Rigid Cellular Plastics |
D1623-17 | Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics |
D1636-21 | Standard Specification for Allyl Molding Compounds |
D1667-17 | Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell) |
D1693-15e1 | Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
D1708-18 | Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
D1709-16ae1 | Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
D1710-15 | Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes |
D1712-09(2020) | Standard Practice for Resistance of Plastics to Sulfide Staining |
D1746-15 | Standard Test Method for Transparency of Plastic Sheeting |
D1755-21 | Standard Specification for Poly(Vinyl Chloride) Resins |
D1763-00(2021) | Standard Specification for Epoxy Resins |
D1784-20 | Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
D1786-21 | Standard Specification for Toluene Diisocyanate |
D1790-21 | Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact |
D1822-13 | Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials |
D1823-16 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer |
D1824-16 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
D1894-14 | Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
D1895-17 | Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
D1896/D1896M-10(2017) | Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds |
D1921-18 | Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials |
D1922-15(2020) | Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
D1929-20 | Standard Test Method for Determining Ignition Temperature of Plastics |
D1938-19 | Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method |
D1998-21 | Standard Specification for Polyethylene Upright Storage Tanks |
D2103-15 | Standard Specification for Polyethylene Film and Sheeting |
D2115-17 | Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions |
D2116-16(2021) | Standard Specification for FEP Resin Molding and Extrusion Materials |
D2126-20 | Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging |
D2176-16(2021) | Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester |
D2222-19 | Standard Test Method for Methanol Extract of Vinyl Chloride Resins |
D2287-19 | Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds |
D2291/D2291M-16 | Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites |
D2343-17 | Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics |
D2383-19 | Standard Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions |
D2396-20 | Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer |
D2457-21 | Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics |
D2463-15 | Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers |
D2538-18 | Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer |
D2561-17 | Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers |
D2562-94(2015) | Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics |
D2563-08(2015) | Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts |
D2565-16 | Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
D2578-17 | Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films |
D2582-21 | Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting |
D2583-13a | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor |
D2584-18 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
D2647-18 | Standard Specification for Crosslinkable Ethylene Plastics |
D2659-16 | Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers |
D2673-14 | Standard Specification for Oriented Polypropylene Film |
D2684/D2684M-15 | Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products |
D2732-14(2020) | Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting |
D2734-16 | Standard Test Methods for Void Content of Reinforced Plastics |
D2765-16 | Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics |
D2838-18 | Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting |
D2839-16 | Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene |
D2842-19 | Standard Test Method for Water Absorption of Rigid Cellular Plastics |
D2843-19 | Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
D2857-16 | Standard Practice for Dilute Solution Viscosity of Polymers |
D2863-19 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
D2911/D2911M-16 | Standard Specification for Dimensions and Tolerances for Plastic Bottles |
D2990-17 | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
D3012-19 | Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven |
D3013-13(2021) | Standard Specification for Epoxy Molding Compounds |
D3014-19a | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
D3016-97(2018) | Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships |
D3030-17 | Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins |
D3045-18 | Standard Practice for Heat Aging of Plastics Without Load |
D3123-09(2017) | Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds |
D3124-98(2019) | Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
D3159-20 | Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials |
Poslední aktualizace: 05.05.2025 (Počet položek: 2 198 283)
© Copyright 2025 NORMSERVIS s.r.o.