Publikace  ASTM Volume 04.09 - Soil and Rock (II): D5878 - latest 1.4.2021 náhled

ASTM Volume 04.09 - Soil and Rock (II): D5878 - latest

ASTM Volume 04.09 - Soil and Rock (II): D5878 - latest

Přeložit název

PUBLIKACE vydána dne 1.4.2021


DostupnostVyprodáno
CenaNA DOTAZ bez DPH
NA DOTAZ

Informace o produktu:

Označení: ASTM Volume 04.09 - Soil and Rock (II): D5878 - latest
Počet stran: 1936
Přibližná hmotnost: 5839 g (12.87 liber)
Datum vydání: 1.4.2021
Země: Americká publikace

Anotace textu normy :

Volumes 04.08 and 04.09 feature geotechnical and geoenvironmental standards that cover soil testing. Topics include compaction, sampling, field investigation, cyclic and dynamic properties, soil texture, plasticity, density characteristics, hydrological properties, hydraulic barriers, and rock for erosion control. Other standards focus on ground water and vadose zone investigations, and how to measure the properties of soil-cement.In addition, Volume 04.09 includes standards on surface and subsurface characterization, erosion and sediment control technology, frozen soils and rock, geotechnics of waste management, and information retrieval and data automation.


Table of Contents



D4380-20   Standard Test Method for Determining Density of Construction Slurries
D5549-19   Standard Guide for Contents of Geostatistical Site Investigation Report
D5878-19   Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
D5879/D5879M-18   Standard Practice for Surface Site Characterization for On-Site Septic Systems
D5881-20   Standard Practice for (Analytical Procedures) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
D5882-16   Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
D5883-18   Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
D5903-96(2017)e1   Standard Guide for Planning and Preparing for a Groundwater Sampling Event
D5912-20   Standard Practice for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
D5918-13e1   Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
D5920/D5920M-20   Standard Practice for (Analytical Procedure) Tests of Anisotropic Unconfined Aquifers by Neuman Method
D5922-18   Standard Guide for Analysis, Interpretation, and Modeling of Spatial Variation in Geostatistical Site Investigations
D5923-18   Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations
D5924-18   Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
D5971/D5971M-16   Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material
D5978/D5978M-16   Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
D5979-96(2019)e1   Standard Guide for Conceptualization and Characterization of Groundwater Systems
D5980-16   Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring
D5981/D5981M-18   Standard Guide for Calibrating a Groundwater Flow Model Application
D5982-15   Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
D5995-18   Standard Guide for Environmental Site Investigation in Cold Regions
D6000/D6000M-15e1   Standard Guide for Presentation of Water-Level Information from Groundwater Sites
D6001/D6001M-20   Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
D6023-16   Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
D6024/D6024M-16   Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
D6026-21   Standard Practice for Using Significant Digits and Data Records in Geotechnical Data
D6027/D6027M-15   Standard Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes
D6028/D6028M-20   Standard Practice for (Analytical Procedure) Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
D6029/D6029M-20   Standard Practice for (Analytical Procedures) Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
D6030-15   Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability
D6031/D6031M-96(2015)   Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
D6032/D6032M-17   Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
D6033-16   Standard Guide for Describing the Functionality of a Groundwater Modeling Code
D6034-20   Standard Practice for (Analytical Procedure) Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
D6035/D6035M-19   Standard Test Methods for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
D6036-96(2014)   Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps
D6067/D6067M-17   Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conductivity
D6089-19   Standard Guide for Documenting a Groundwater Sampling Event
D6092-14e1   Standard Practice for Specifying Standard Sizes of Stone for Erosion Control
D6103/D6103M-17e1   Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)
D6128-16   Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
D6151/D6151M-15   Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
D6167-19   Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
D6169/D6169M-13   Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
D6170-17   Standard Guide for Selecting a Groundwater Modeling Code
D6230-21e1   Standard Practices for Monitoring Earth or Structural Movement Using Inclinometers
D6235-18   Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites
D6274-18   Standard Guide for Conducting Borehole Geophysical Logging - Gamma
D6276-19   Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
D6282/D6282M-14   Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
D6285-99(2016)   Standard Guide for Locating Abandoned Wells
D6286/D6286M-20   Standard Guide for Selection of Drilling and Direct Push Methods for Geotechnical and Environmental Subsurface Site Characterization
D6312-17   Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs at Waste Disposal Facilities
D6391-11(2020)   Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
D6393/D6393M-21   Standard Test Method for Bulk Solids Characterization by Carr Indices
D6429-20   Standard Guide for Selecting Surface Geophysical Methods
D6430-18   Standard Guide for Using the Gravity Method for Subsurface Site Characterization
D6431-18   Standard Guide for Using the Direct Current Resistivity Method for Subsurface Site Characterization
D6432-19   Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
D6449-99(2015)e1   Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
D6452-18   Standard Guide for Purging Methods for Wells Used for Ground Water Quality Investigations
D6459-19   Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
D6460-19   Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D6462-19   Standard Practice for Silt Fence Installation and Maintenance
D6467-13e1   Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
D6473-15   Standard Test Method For Specific Gravity And Absorption of Rock For Erosion Control
D6475-17   Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
D6517-18   Standard Guide for Field Preservation of Ground Water Samples
D6519-15   Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
D6528-17   Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils
D6539-13   Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air
D6564/D6564M-17   Standard Guide for Field Filtration of Groundwater Samples
D6572-21   Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
D6598-19   Standard Guide for Installing and Operating Settlement Points for Monitoring Vertical Deformations
D6599-00(2014)e2   Standard Practice for Construction of Live Fascines on Slopes
D6634/D6634M-14   Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells
D6635-15   Standard Test Method for Performing the Flat Plate Dilatometer
D6639-18   Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Characterizations
D6683-19   Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
D6684-18   Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Systems
D6685-01(2015)   Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
D6711-15e1   Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
D6724/D6724M-16   Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
D6725/D6725M-16   Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
D6726-15   Standard Guide for Conducting Borehole Geophysical Logging—Electromagnetic Induction
D6727/D6727M-16   Standard Guide for Conducting Borehole Geophysical Logging—Neutron
D6758-18e1   Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
D6760-16   Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
D6765-13e1   Standard Practice for Live Staking
D6771-18   Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations
D6773-16   Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
D6780/D6780M-19   Standard Test Methods for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
D6820-20   Standard Guide for Use of the Time Domain Electromagnetic Method for Geophysical Subsurface Site Investigation
D6825-14e1   Standard Guide for Placement of Riprap Revetments
D6836-16   Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge
D6884-03(2015)e1   Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
D6910/D6910M-19   Standard Test Method for Marsh Funnel Viscosity of Construction Slurries
D6911-15   Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
D6913/D6913M-17   Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
D6914/D6914M-16   Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
D6938-17ae1   Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
D6940/D6940M-20   Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
D6941-19   Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
D7012-14e1   Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
D7013/D7013M-15   Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
D7014-18e1   Standard Practice for Installation of Double-Twisted Wire Mesh Gabions and Revet Mattresses
D7015/D7015M-18   Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
D7045-17   Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities
D7047-15e1   Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium)
D7048-16   Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
D7069-04(2015)   Standard Guide for Field Quality Assurance in a Groundwater Sampling Event
D7070-16   Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
D7099-04(2018)   Standard Terminology Relating to Frozen Soil and Rock
D7100-11(2020)   Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
D7101-13e1   Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
D7128-18   Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
D7181-20   Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils
D7208-14e1   Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D7242/D7242M-06(2013)e1   Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers
D7243-11(2020)   Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
D7262-10(2016)e1   Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
D7263-21   Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens
D7276-16   Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
D7277-16   Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
D7299-20   Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
D7300-18   Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
D7322/D7322M-17   Standard Test Method for Determination of Erosion Control Product (ECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
D7351/D7351M-21   Standard Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications
D7352-18   Standard Practice for Volatile Contaminant Logging Using a Membrane Interface Probe (MIP) in Unconsolidated Formations with Direct Push Methods
D7367-19e2   Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
D7380-15   Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
D7382-20   Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer
D7383-19   Standard Test Methods for Axial Rapid Load (Compressive Force Pulse) Testing of Deep Foundations
D7400/D7400M-19   Standard Test Methods for Downhole Seismic Testing
D7481-18   Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
D7503-18   Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
D7560-16e1   Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)
D7608-18   Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
D7626-19e1   Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
D7648/D7648M-18   Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
D7663-12(2018)e1   Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
D7664-10(2018)e1   Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
D7698-21   Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
D7699/D7699M-20   Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites
D7758-17   Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
D7759/D7759M-21   Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
D7760-18   Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter
D7762-18e1   Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
D7764-20   Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers
D7765-18a   Standard Practice for Use of Foundry Sand in Structural Fill and Embankments
D7780-20   Standard Practice for Minimum Geospatial Data for Representing Coal Mining Features
D7830/D7830M-14(2021)e1   Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
D7891-15   Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell
D7928-21e1   Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
D7929-20   Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells
D7949-14   Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations
D7986-17a   Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
D8006-16   Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations
D8012-18   Standard Practice for Reclamation of Scrap and Waste Asphalt Shingles to Produce Reclaimed Asphalt Shingles (RAS) for Use in Transportation Applications
D8037/D8037M-16   Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils
D8038-16   Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material
D8053-18   Standard Guide for Data Management and Reporting Associated with Oil and Gas Development Involving Hydraulic Fracturing
D8081-17   Standard Guide for Theory and Principles for Obtaining Reliable and Accurate Bulk Solids Flow Data Using a Direct Shear Cell
D8082-18   Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application
D8106-17   Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay
D8107-18   Standard Practice for Determining Sediment Pond Skimmer Flow Rate
D8121/D8121M-19   Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device
D8151-19e1   Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing
D8152-18   Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test
D8167/D8167M-18a   Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
D8169/D8169M-18   Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load
D8170-20   Standard Guide for Using Disposable Handheld Soil Core Samplers for the Collection and Storage of Soil for Volatile Organic Analysis
D8198-18   Standard Specification for Hydraulically Applied 100?% Wood Fiber Mulches
D8199-20   Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control
D8202-18   Standard Specification for Hydraulically Applied 100% Wheat Straw Fiber Mulches
D8232-18   Standard Test Procedures for Measuring the Inclination of Deep Foundations
D8249-19   Standard Practice for Use of Rotary Kiln Produced Porous Ceramic as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
D8281/D8281M-21   Standard Test Method for Determining the Presence of Expanding Clays in Rock for Erosion Control Using Ethylene Glycol
D8295-19   Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements
D8296-19   Standard Test Method for Consolidated Undrained Cyclic Direct Simple Shear Test under Constant Volume with Load Control or Displacement Control
D8297/D8297M-20   Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Sequential Rainfall-Induced Erosion Using a Tilted Bed Slope
D8298/D8298M-20   Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Continuous Rainfall-Induced Erosion Using a Tilted Bed Slope
D8299-19   Standard Guide for Using Metal Ratios in Soils to Distinguish Between Anthropogenic and Natural Beryllium
D8326-21   Standard Practice for Measurement of the Kinetic Energy of Simulated Rainfall
D8359-21   Standard Test Method for Determining the In Situ Rock Deformation Modulus and Other Associated Rock Properties Using a Flexible Volumetric Dilatometer

Doporučujeme:

Aktualizace zákonů

Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.




Cookies Cookies

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.