Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM D653-22

Standard Terminology Relating to Soil, Rock, and Contained Fluids

Přeložit název

NORMA vydána dne 1.11.2022

Jazyk
Provedení	PDF - okamžité stažení - 3 103.40 Kč Tištěné - 3 103.40 Kč
Dostupnost	SKLADEM
Cena	3 103.40 Kč bez DPH
3 103.40 Kč

Informace o normě:

Označení normy: ASTM D653-22
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2022
Kód zboží: NS-1089372
Počet stran: 50
Přibližná hmotnost: 150 g (0.33 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Ochrana prostředí a zdraví. Bezpečnost (názvosloví)
Jakost půdy a pedologie všeobecně

Anotace textu normy ASTM D653-22 :

Keywords:

ICS Number Code 01.040.13 (Environment and health protection. Safety (Vocabularies)),13.080.01 (Soil quality in general)

Doplňující informace

Significance and Use

3.1?Definitions in this standard are to be regarded as the correct ones for terms found in other ASTM standards of Committee D18. Certain terms may be found in more than one standard issued under the jurisdiction of this committee and many of these terms have been placed in this standard.

3.2?Terms that are defined in some textbooks may differ slightly from those in this terminology standard. Definitions in this terminology standard are to be regarded as correct for ASTM usage.

3.3?See Appendix X1 for References.

3.4?Definitions marked with (ISRM) are included for the convenience of the user and were taken directly from the International Society for Rock Mechanics (see X1.3).

3.5?A number of the definitions include symbols. The symbols appear in italics immediately after the name of the term.

3.5.1?No significance should be placed on the order in which the symbols are presented where two or more are given for an individual term.

3.5.2?The symbols presented are examples; therefore, other symbols are acceptable.

3.5.3?See Appendix X2 for ISRM Symbols.

3.6?A number of definitions indicate the units of measurements in brackets and which follow the symbol(s) if given. The applicable units are indicated by italic capital letters, as follows:
3.6.1?Positive exponents designate multiples in the numerator. Negative exponents designate multiples in the denominator. Degrees of angle are indicated as degrees.

3.6.2?Expressing the units either in SI or the inch-pound system has been purposely omitted in order to leave the choice of the system and specific unit to the engineer and the particular application, for example:
FL^?2may be expressed in pounds-force per square inch, kilopascals, tons per square foot, etc.
LT^?1may be expressed in feet per minute, meters per second, etc.

3.7?Where synonymous terms are cross-referenced, the definition is usually included with the earlier term alphabetically. Where this is not the case, the later term is the more significant.

3.8?Grouping of Definitions and Listing of Related TermsTo aide users in finding terms, this terminology standard provides grouping of definitions and listing of related terms.

3.8.1?GroupingsThese groupings are presented in Table 1A.

TABLE 1A Listing of Groupings*

Aquifer

Coefficients: Earth

Consolidation

D18.24

Density

Head

Measurement

Principal Plane

Specific Gravity

Stress

Unit Weight

Wave

*Groupings can be editorially added or removed by the subcommittee chair as they are changed within D653.

3.8.1.1?Sub-Term GroupingsThese groupings are presented in Table 1B.

TABLE 1B Listing of Sub-Term Groupings*

ASTM cement types

horizon or soil horizon

moisture equivalent

plastic equilibrium

shear failure or failure by rupture

site investigation

soil structure

*Groupings can be editorially added or removed by the subcommittee chair as they are changed within D653.

3.8.2?Listings (see Appendix X3)The listing of related terms is given in Table 1C. This listing may include all of the terms defined within standards under the jurisdiction of a specific technical subcommittee, such as D18.14, D18.24, D18.25, and D18.26.

TABLE 1C Listing of Related Terms*

compaction

density

effective

specific gravity

unit weight

*Listings of related terms can be editorially added or removed by the subcommittee chair as they are changed within D653.

1. Scope

1.1?These definitions apply to many terms found in the Terminology section of standards of ASTM Committee D18.

1.2?This terminology standard defines terms related to soil, rock, and contained fluids found in the various sections of standards under the jurisdiction of ASTM Committee D18.

1.3?Definitions of terms relating to frozen soils are contained in Terminology D7099.

1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

D5878-19	Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
D6026-21	Standard Practice for Using Significant Digits and Data Records in Geotechnical Data
D6028-17	Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
D6029-17	Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
D6312-17	Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs at Waste Disposal Facilities
D6910/D6910M-19	Standard Test Method for Marsh Funnel Viscosity of Construction Slurries
D6913-04	Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
D7099-04(2018)	Standard Terminology Relating to Frozen Soil and Rock
D7382-20	Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer
E691-23	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
D5270-96	Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
C150-07	Standard Specification for Portland Cement
C802-14(2022)	Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
D558-11	Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
D698-12(2021)	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
D854-23	Standard Test Methods for Specific Gravity of Soil Solids by the Water Displacement Method
D4106-20	Standard Practice for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
D4050-20	Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems
D4104-17	Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
D4105-15	Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
D4044-96	Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifiers
D4043-17	Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
D4750-87(2001)	Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well) (Withdrawn 2010)
D1883-21	Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
D2435-04	Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
D2487-17e1	Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) (Includes all amendments and changes 4/2/2020).
D4253-16e1	Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table (Includes all amendments and changes 11/21/2019).
D4254-16	Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
D4318-17e1	Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils (Includes all amendments and changes 4/17/2018).
D4429-09	Standard Test Method for CBR (California Bearing Ratio) of Soils in Place
D4186-06	Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
D1557-12(2021)	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
D4943-18	Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method
D5084-16a	Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter (Includes all amendments and changes 12/27/2016).
D5088-20	Standard Practice for Decontamination of Field Equipment Used at Waste Sites
D5092-04	Standard Practice for Design and Installation of Ground Water Monitoring Wells in Aquifers
D5269-15	Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method (Withdrawn 2024)

Doporučujeme:

EviZak - všechny zákony včetně jejich evidence na jednom místě

Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !

Chcete vědět více informací? Podívejte se na tuto stránku.