Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM Volume 04.07 - Building Seals and Sealants; Fire Standards; Dimension Stone
Přeložit název
PUBLIKACE vydána dne 1.11.2019
Dostupnost | Vyprodáno |
Cena | NA DOTAZ bez DPH |
NA DOTAZ |
Označení: ASTM Volume 04.07 - Building Seals and Sealants; Fire Standards; Dimension Stone
Počet stran: 1802
Přibližná hmotnost: 5437 g (11.99 liber)
Datum vydání: 1.11.2019
Země: Americká publikace
Specifications, tests, and practices detail the property requirements for caulking and glazing compounds; structural, emulsion, hot-applied, and solvent-release sealants; lock-strip gaskets; aerosol foam sealants; pipe gaskets; sealing tapes; and other building sealants. Also featured are standards on how to measure sealant properties. It includes test methods on the combustibility and fire resistance of various materials, including building construction materials, mattresses, and upholstered furniture. Other standards cover fire safety engineering and large-scale fire tests under controlled conditions. Volume 04.07 also includes standards on dimension stone, including dimension stone anchoring systems and selection of dimension stone for different applications.
C97/C97M-18 | Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone |
C99/C99M-18 | Standard Test Method for Modulus of Rupture of Dimension Stone |
C119-19 | Standard Terminology Relating to Dimension Stone |
C120/C120M-15a | Standard Test Methods for Flexure Testing of Structural and Roofing Slate |
C121/C121M-15 | Standard Test Method for Water Absorption of Slate |
C170/C170M-17 | Standard Test Method for Compressive Strength of Dimension Stone |
C217/C217M-15a | Standard Test Method for Weather Resistance of Slate |
C241/C241M-15e1 | Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic |
C406/C406M-15 | Standard Specification for Roofing Slate |
C503/C503M-15 | Standard Specification for Marble Dimension Stone |
C509-06(2015) | Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material |
C510-16 | Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants |
C542-05(2017) | Standard Specification for Lock-Strip Gaskets |
C568/C568M-15 | Standard Specification for Limestone Dimension Stone |
C603-14(2019) | Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants |
C615/C615M-18e1 | Standard Specification for Granite Dimension Stone |
C616/C616M-15 | Standard Specification for Quartz-Based Dimension Stone |
C629/C629M-15 | Standard Specification for Slate Dimension Stone |
C639-15(2020) | Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants |
C661-15 | Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer |
C679-15 | Standard Test Method for Tack-Free Time of Elastomeric Sealants |
C681-14(2019) | Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds |
C711-14 | Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants |
C712-14 | Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants |
C716-06(2015) | Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials |
C717-19 | Standard Terminology of Building Seals and Sealants |
C719-14(2019) | Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle) |
C731-15 | Standard Test Method for Extrudability, After Package Aging, of Latex Sealants |
C732-17 | Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants |
C734-15(2019) | Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering |
C736-12(2017) | Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants |
C765-97(2015) | Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants |
C771-14(2019) | Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants |
C772-03(2019) | Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants |
C782-13(2018) | Standard Test Method for Softness of Preformed Tape Sealants |
C792-15(2020) | Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants |
C793-05(2017) | Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants |
C794-18 | Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants |
C834-17 | Standard Specification for Latex Sealants |
C864-05(2019) | Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
C879-03(2019) | Standard Test Methods for Release Papers Used with Preformed Tape Sealants |
C880/C880M-18 | Standard Test Method for Flexural Strength of Dimension Stone |
C907-17(2018) | Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method |
C908-15 | Standard Test Method for Yield Strength of Preformed Tape Sealants |
C910-16 | Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants |
C919-19 | Standard Practice for Use of Sealants in Acoustical Applications |
C920-18 | Standard Specification for Elastomeric Joint Sealants |
C961-15 | Standard Test Method for Lap Shear Strength of Sealants |
C963-00(2017) | Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets |
C964-19 | Standard Guide for Lock-Strip Gasket Glazing |
C972-18 | Standard Test Method for Compression-Recovery of Tape Sealant |
C1016-14 | Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material |
C1021-08(2019) | Standard Practice for Laboratories Engaged in Testing of Building Sealants |
C1083-06(2015) | Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials |
C1087-16 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
C1115-17 | Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories |
C1135-19 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
C1166-06(2016) | Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories |
C1183/C1183M-13(2018) | Standard Test Method for Extrusion Rate of Elastomeric Sealants |
C1184-18e1 | Standard Specification for Structural Silicone Sealants |
C1193-16 | Standard Guide for Use of Joint Sealants |
C1201/C1201M-15 | Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference |
C1216/C1216M-13 | Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants |
C1241-14 | Standard Test Method for Volume Shrinkage of Latex Sealants During Cure |
C1242-19 | Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems |
C1246-17 | Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure |
C1247-14 | Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids |
C1248-18 | Standard Test Method for Staining of Porous Substrate by Joint Sealants |
C1249-18 | Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications |
C1253-14(2019) | Standard Test Method for Determining the Outgassing Potential of Sealant Backing |
C1257-15 | Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants |
C1265-17 | Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications |
C1266-17 | Standard Test Method for Flow Characteristics of Preformed Tape Sealants |
C1281-16 | Standard Specification for Preformed Tape Sealants for Glazing Applications |
C1294-15 | Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials |
C1311-14 | Standard Specification for Solvent Release Sealants |
C1330-18 | Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants |
C1352/C1352M-15 | Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone |
C1353/C1353M-15a | Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser |
C1354/C1354M-15 | Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone |
C1367-19 | Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures |
C1369-19 | Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units |
C1375-00(2014) | Standard Guide for Substrates Used in Testing Building Seals and Sealants |
C1382-16 | Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
C1392-00(2014) | Standard Guide for Evaluating Failure of Structural Sealant Glazing |
C1394-03(2012) | Standard Guide for In-Situ Structural Silicone Glazing Evaluation |
C1401-14 | Standard Guide for Structural Sealant Glazing |
C1442-14 | Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus |
C1472-16e1 | Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width |
C1481-12(2017) | Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS) |
C1487-02(2012) | Standard Guide for Remedying Structural Silicone Glazing |
C1496-18 | Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades |
C1501-19 | Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures |
C1515-14 | Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing |
C1518-16 | Standard Specification for Precured Elastomeric Silicone Joint Sealants |
C1519-10(2017) | Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures |
C1520-02(2015)e1 | Standard Guide for Paintability of Latex Sealants |
C1521-19(2020) | Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints |
C1523-17 | Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants |
C1526-19 | Standard Specification for Serpentine Dimension Stone |
C1527/C1527M-11(2018) | Standard Specification for Travertine Dimension Stone |
C1528/C1528M-18 | Standard Guide for Selection of Dimension Stone |
C1536-19 | Standard Test Method for Measuring the Yield for Aerosol Foam Sealants |
C1564-15 | Standard Guide for Use of Silicone Sealants for Protective Glazing Systems |
C1589/C1589M-18 | Standard Practice for Outdoor Weathering of Construction Seals and Sealants |
C1620-16e1 | Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants |
C1635-16 | Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension |
C1642-14 | Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials |
C1643-14(2020) | Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants |
C1681-18 | Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain |
C1721-15 | Standard Guide for Petrographic Examination of Dimension Stone |
C1722-18 | Standard Guide for Repair and Restoration of Dimension Stone |
C1735-17 | Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation |
C1736-11 | Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device |
C1737-16 | Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing |
C1756-17a | Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs |
C1799/C1799M-14 | Standard Guide to Dimension Stone Test Specimen Sampling and Preparation |
C1806-14 | Standard Test Method for Measuring the Flow Rate of Aerosol Foam Sealants |
C1815-17 | Standard Practice for Periodically Measuring and Monitoring Sealant Dimensions to Stability Following a Period of Compression or Tension |
C1850-17 | Standard Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use in Developing Protocols to Predict the Design Life of Building Sealant Systems |
C1851-18 | Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus |
C1852-17 | Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives |
D2202-00(2019) | Standard Test Method for Slump of Sealants |
D2203-01(2018) | Standard Test Method for Staining from Sealants |
D2377-14(2019) | Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants |
D2452-15(2019) | Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds |
D2453-15(2020)e1 | Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds |
D2859-16 | Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials |
E84-19b | Standard Test Method for Surface Burning Characteristics of Building Materials |
E108-17 | Standard Test Methods for Fire Tests of Roof Coverings |
E119-18ce1 | Standard Test Methods for Fire Tests of Building Construction and Materials |
E136-19a | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750°C |
E162-16 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
E176-18ae1 | Standard Terminology of Fire Standards |
E535-19 | Standard Practice for Preparation of Fire-Test-Response Standards |
E603-17 | Standard Guide for Room Fire Experiments |
E648-19ae1 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source |
E662-19 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials |
E800-14 | Standard Guide for Measurement of Gases Present or Generated During Fires |
E814-13a(2017) | Standard Test Method for Fire Tests of Penetration Firestop Systems |
E906/E906M-17 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method |
E970-17 | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
E1317-19 | Standard Test Method for Flammability of Surface Finishes |
E1321-18 | Standard Test Method for Determining Material Ignition and Flame Spread Properties |
E1352-16 | Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies |
E1353-16 | Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture |
E1354-17 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
E1355-12(2018) | Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models |
E1474-14 | Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
E1529-16e1 | Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies |
E1537-16 | Standard Test Method for Fire Testing of Upholstered Furniture |
E1546-15 | Standard Guide for Development of Fire-Hazard-Assessment Standards |
E1590-17 | Standard Test Method for Fire Testing of Mattresses |
E1591-13 | Standard Guide for Obtaining Data for Fire Growth Models |
E1623-16 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
E1678-15 | Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
E1725-19 | Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components |
E1740-15 | Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter |
E1776-16 | Standard Guide for Development of Fire-Risk-Assessment Standards |
E1822-17 | Standard Test Method for Fire Testing of Stacked Chairs |
E1966-15(2019) | Standard Test Method for Fire-Resistive Joint Systems |
E1995-18 | Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally |
E2032-09(2017) | Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E?119 |
E2058-19 | Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA) |
E2061-18 | Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
E2067-15 | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
E2102-17 | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
E2187-16 | Standard Test Method for Measuring the Ignition Strength of Cigarettes |
E2203-14(2018) | Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories |
E2226-15b(2019) | Standard Practice for Application of Hose Stream |
E2231-18 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
E2257-17 | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
E2280-17 | Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities |
E2307-19 | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus |
E2335-17 | Standard Guide for Laboratory Monitors |
E2336-16 | Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
E2404-17 | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
E2536-15a | Standard Guide for Assessment of Measurement Uncertainty in Fire Tests |
E2573-17 | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
E2574/E2574M-17 | Standard Test Method for Fire Testing of School Bus Seat Assemblies |
E2579-19 | Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics |
E2599-18 | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics |
E2632/E2632M-13e1 | Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials |
E2652-18 | Standard Test Method for Assessing Combustibility of Materials Using a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C |
E2653-15 | Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories |
E2688-18 | Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics |
E2690-17b | Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics |
E2707-15 | Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure |
E2726/E2726M-12a(2017) | Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands |
E2748-12a(2017) | Standard Guide for Fire-Resistance Experiments |
E2749-15a(2019) | Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens |
E2750-17 | Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM |
E2768-11(2018) | Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test) |
E2816-18b | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
E2837-13(2017) | Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies |
E2874-19 | Standard Test Method for Determining the Fire-Test Response Characteristics of a Building Spandrel-Panel Assembly Due to External Spread of Fire |
E2886/E2886M-14 | Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement |
E2912-17 | Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction |
E2957-17 | Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections |
E2965-17 | Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter |
E2988-17 | Standard Practice for Specimen Preparation and Mounting of Flexible Fibrous Glass Insulation for Metal Buildings to Assess Surface Burning Characteristics |
E2989-19a | Standard Guide for Assessment of Continued Applicability of Reaction to Fire Test Reports Used in Building Regulation |
E3020-16a | Standard Practice for Ignition Sources |
E3021/E3021M-15(2019) | Standard Guide for Evaluating the Relative Effectiveness of Building Systems to Resist the Passage of Products of Combustion Based on the Aggregation of Leakage Rates |
E3048-19a | Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel |
E3082-17e1 | Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees |
E3134-17 | Standard Specification for Transportation Tunnel Structural Components and Passive Fire Protection Systems |
E3202-19e1 | Standard Practice for Specimen Preparation and Mounting of Plastic Composites for Use as Deck Boards, Stair Treads, Guards or Handrails to Assess Surface Burning Characteristics |
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 25.09.2024 (Počet položek: 2 350 354)
© Copyright 2024 NORMSERVIS s.r.o.