Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for In-Situ Structural Silicone Glazing Evaluation
Automaticky přeložený název:
Standardní příručka pro In-Situ strukturální silikonové zasklívání Vyhodnocení
NORMA vydána dne 1.12.2012
Označení normy: ASTM C1394-03(2012)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.12.2012
Kód zboží: NS-11005
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
distress, durability, glazing, structural glazing, structrual sealant glazing, structural sealant joint, structural silicone, SSG, SSG design calculation, SSG design procedure, SSG evaluation, SSG installations, ICS Number Code 81.040.20 (Glass in building)
Significance and Use | ||||||
4.1 Guidelines are provided for the procedures to evaluate existing SSG installations, including two- and four-sided installations. Due to the unlimited range of materials that may be used in a particular building, the information contained in this guide is general in nature. For a discussion of new SSG installations, refer to Guide C1401. 4.2 Typical conditions are listed that might be discovered during, or suggest the need for, such evaluations. Guidelines are also suggested for times to perform evaluations. These guidelines are also necessarily general. Professional judgment of a qualified person should be used in determining the appropriate time to perform an evaluation on a particular building. 4.3 This guide should not be the only reference consulted when determining the scope of a proposed evaluation. For example, the local building code and the manufacturers' product literature for the actual materials used (if known) should also be considered. 4.4 This document is not a substitute for experience and judgment in assessing the condition of the specialized types of construction discussed. |
||||||
1. Scope | ||||||
1.1 It is recommended to periodically evaluate the existing condition of structural sealant glazing (hereinafter called SSG) installations in situ to detect problems before they become severe or pervasive. Evaluation of existing SSG installations are required by certain building codes and local ordinances. This guide provides a program to evaluate the existing conditions, lists typical conditions, which might be found, and suggests times when such evaluations are appropriate. The committee with jurisdiction over this standard is not aware of any comparable standards published by any other organizations. |
||||||
2. Referenced Documents | ||||||
|
Historická
1.4.2012
Historická
1.5.2013
Historická
1.6.2014
Historická
1.4.2012
Historická
1.5.2013
Historická
15.11.2012
Poslední aktualizace: 22.12.2024 (Počet položek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.