Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM E1591-13

Standard Guide for Obtaining Data for Fire Growth Models

Automaticky přeložený název:

Standardní Guide získávání údajů pro Fire růstu modely

NORMA vydána dne 1.4.2013

Jazyk
Provedení	PDF - okamžité stažení - 1 823.90 Kč Tištěné - 1 823.90 Kč
Dostupnost	SKLADEM
Cena	1823.90 Kč bez DPH
1 823.90 Kč

Informace o normě:

Označení normy: ASTM E1591-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2013
Kód zboží: NS-42290
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Ochrana proti ohni všeobecně

Anotace textu normy ASTM E1591-13 :

Keywords:

air/fuel ratio, combustion efficiency, convective heat transfer coefficient, data for fire models, density, emissivity, entrainment coefficient, fire model, flame extinction coefficient, flame spread parameter, heat of combustion, heat of gasification, heat of pyrolysis, rate of heat release, ignition temperature, mass loss rate, material properties, production rate of species, pyrolysis temperature, specific heat, thermal conductivity, and thermal inertia

Doplňující informace

Significance and Use

4.1 This guide is intended primarily for users and developers of mathematical fire growth models. It is also useful for people conducting fire tests, making them aware of some important applications and uses for small-scale fire test results. The guide thus contributes to increased accuracy in fire growth model calculations, which depend greatly on the quality of the input data.

4.2 The emphasis of this guide is on ignition, pyrolysis and flame spread models for solid materials.

1. Scope

1.1 This guide describes data required as input for mathematical fire growth models.

1.2 Guidelines are presented on how the data can be obtained.

1.3 The emphasis in this guide is on ignition, pyrolysis and flame spread models for solid materials.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.6 This fire standard cannot be used to provide quantitative measures.

2. Referenced Documents

E537-20	Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry
E408-13(2019)	Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
E793-06(2018)	Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
E906-09	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
E967-18	Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
E968-02	Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
E1321-18	Standard Test Method for Determining Material Ignition and Flame Spread Properties
C1371-15(2022)	Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
E1354-23	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
E1537-22	Standard Test Method for Fire Testing of Upholstered Furniture
E1623-22a	Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) (Includes all amendments and changes 12/7/2022).
E2058-19	Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
E2257-22	Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
D2395-17(2022)	Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
C518-21	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C835-06(2020)	Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
C177-19e1	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).
D3417-99	Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (Withdrawn 2004)
E472-86 (1991)	Practice for Reporting Thermoanalytical Data (Withdrawn 1995)
E176-24	Standard Terminology of Fire Standards
D5865-13	Standard Test Method for Gross Calorific Value of Coal and Coke

Podobné normy:

ASTM E1529-13

Historická
1.7.2013

ASTM E1546-09a

Historická
1.4.2009

ASTM E1776-13

Historická
1.4.2013

ASTM E2309/E2309M-05..

Historická
15.1.2011

ASTM E2653-09

Historická
1.4.2009

ASTM E535-14

Historická
1.5.2014

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.