Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM E2277-03

Standard Guide for Design and Construction of Coal Ash Structural Fills (Withdrawn 2012)

Automaticky přeložený název:

Standardní Průvodce pro provedení a konstrukci uhelného popela strukturálních výplní (Withdrawn 2012 )

NORMA vydána dne 6.1.2012

Jazyk
Provedení	PDF - okamžité stažení - 1 756.50 Kč Tištěné - 1 756.50 Kč
Dostupnost	SKLADEM
Cena	1756.50 Kč bez DPH
1 756.50 Kč

Informace o normě:

Označení normy: ASTM E2277-03
Poznámka: NEPLATNÁ
Datum vydání normy: 6.1.2012
Kód zboží: NS-44886
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM E2277-03 :

Keywords:

bottom ash, coal ash, embankment, fly ash, pollution prevention, resource conservation, structural fill, utilization, ICS Number Code 13.020.40 (Pollution, pollution control and conservation)

Doplňující informace

1. Scope

1.1 This guide covers procedures for the design and construction of engineered structural fills using coal fly ash, bottom ash, or ponded ash.

1.2 The utilization of coal ash under this guide is a component of a pollution prevention program; Guide E 1609 describes pollution prevention activities in more detail. Utilization of coal ash in this manner conserves land, natural resources, and energy.

1.3 This guide applies only to fly ash and bottom ash produced primarily by the combustion of coal.

1.4 The testing, engineering, and construction practices for coal ash fills are similar to generally accepted practices for natural soil fills. Coal ash structural fills should be designed using generally accepted engineering practices.

1.5 Laws and regulations governing the use of coal ash vary by state. The user of this guide has the responsibility to determine and comply with applicable requirements.

1.6 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

2. Referenced Documents

PP059–09–UL	Standard Practice for Coal Combustion Fly Ash for Embankments
D698-12(2021)	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
D4972-19	Standard Test Methods for pH of Soils
D5084-16a	Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter (Includes all amendments and changes 12/27/2016).
D5239-12	Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization
D5550-23	Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
D5759-12(2020)	Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
D1883-21	Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
D2166-06	Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
D2167-15	Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method (Withdrawn 2024)
D2216-19	Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
D2435-04	Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
D2844-07	Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
D2850-23	Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
D854-23	Standard Test Methods for Specific Gravity of Soil Solids by the Water Displacement Method
D1195/D1195M-21	Standard Test Method for Repetitive Static Plate Tests of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements
D1196/D1996M	Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
D1452-09	Standard Practice for Soil Exploration and Sampling by Auger Borings
D1556-07	Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
D1557-12(2021)	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
D1586-11	Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
D7181-20	Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils
E2201-13(2020)	Standard Terminology for Coal Combustion Products
G51-23	Standard Test Method for Measuring pH of Soil for Use in Corrosion Evaluations
G57-20	Standard Test Method for Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
T288	Determining Minimum Laboratory Soil Resistivity
T289	Determining pH of Soil for Use in Corrosion Testing
T290	Determining Water Soluble Sulfate Ion Content in Soil
T291	Determining Water Soluble Chloride Ion Content in Soil
SW 846	Test Methods for Evaluationg Solid Waste: Physical/Chemical Methods
29 CFR Part 1910.1200	Hazard Communication
D2922-05	Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth) (Withdrawn 2007)
D4959-24	Standard Test Method for Determination of Water Content of Soil By Direct Heating
D3987-12(2020)	Standard Practice for Shake Extraction of Solid Waste with Water
D4253-16e1	Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table (Includes all amendments and changes 11/21/2019).
D4254-16	Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
D4429-09	Standard Test Method for CBR (California Bearing Ratio) of Soils in Place
D4767-11(2020)	Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
D3877-08	Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures (Withdrawn 2017)
D3550-01	Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
D653-22	Standard Terminology Relating to Soil, Rock, and Contained Fluids
C150/E150M	Specification for Portland Cement
C188-17(2023)	Standard Test Method for Density of Hydraulic Cement
C311-11	Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
C593-19	Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
C595/C595M-23	Standard Specification for Blended Hydraulic Cements
C618-23e1	Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete (Includes all amendments and changes 3/21/2023).
C1157-08	Standard Performance Specification for Hydraulic Cement
C1600	Specification for Rapid Hardening Hydraulic Cement
D75-03	Standard Practice for Sampling Aggregates
D422-63(1998)	Standard Test Method for Particle-Size Analysis of Soils

Doporučujeme:

EviZak - všechny zákony včetně jejich evidence na jednom místě

Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !

Chcete vědět více informací? Podívejte se na tuto stránku.