Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM E1613-12

Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)

Automaticky přeložený název:

Standardní zkušební metoda pro stanovení v čele s indukčně vázanou plazmou atomovou emisní spektrometrií (ICP-AES), plamenná atomová absorpční spektrometrie (FAAS), nebo Graphite Furnace atomové absorpční spektrometrie (GFAAS) techniky

NORMA vydána dne 15.7.2012

Jazyk
Provedení	PDF - okamžité stažení - 2 005.90 Kč Tištěné - 2 005.90 Kč
Dostupnost	SKLADEM
Cena	2005.90 Kč bez DPH
2 005.90 Kč

Informace o normě:

Označení normy: ASTM E1613-12
Poznámka: NEPLATNÁ
Datum vydání normy: 15.7.2012
Kód zboží: NS-42363
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Olovo, zinek, cín a jejich slitiny

Anotace textu normy ASTM E1613-12 :

Keywords:

FAAS, GFAAS, ICP-AES, instrumental analysis, lead, ICS Number Code 77.120.60 (Lead, zinc, tin and their alloys)

Doplňující informace

Significance and Use

This test method is intended for use with other standards (see 2.1) that address the collection and preparation of samples (dried chips, dusts, soils, and air particulates) that are obtained during the assessment or mitigation of lead hazards from buildings and related structures.

This test method may also be used to analyze similar samples from other environments.

1. Scope

1.1 This test method is intended for use with extracted or digested samples that were collected during the assessment, management, or abatement of lead hazards from buildings, structures, or other locations.

1.2 This test method covers the lead analysis of sample extracts or digestates (for example, extracted or digested paint, soil, dust, and airborne particulate) using inductively coupled plasma atomic emission spectrometry (ICP-AES), flame atomic absorption spectrometry (FAAS), or graphite furnace atomic absorption spectrometry (GFAAS).

1.3 This test method contains directions for sample analysis, as well as quality assurance (QA) and quality control (QC), and may be used for purposes of laboratory accreditation and certification.

1.4 No detailed operating instructions are provided because of differences among various makes and models of suitable instruments. Instead, the analyst shall follow the instructions provided by the manufacturer of the particular instrument.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6 This practice contains notes which are explanatory and not part of the mandatory requirements of this standard.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E1605-22	Standard Terminology Relating to Lead in Buildings
E1644-21	Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
E1645-21	Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
D1193-06(2018)	Standard Specification for Reagent Water
D3919-15	Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
D4210-89(1996)e1	Standard Practice for Intralaboratory Quality Control Procedures and a Discussion on Reporting Low-Level Data (Withdrawn 2002)
D4697-95(2001)	Standard Guide for Maintaining Test Methods in the User's Laboratory (Withdrawn 2009)
D4840-99(2018)e1	Standard Guide for Sample Chain-of-Custody Procedures (Includes all amendments and changes 8/22/2018).
D6785-20	Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
D7144-21	Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Determination of Metals and Metalloids
E456-13a(2022)	Standard Terminology Relating to Quality and Statistics (Includes all amendments and changes 4/21/2022).
E691-23	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E1188-23	Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
E1726-21	Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
E1727-20	Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
E1728-16	Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
E1729-20	Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
E1741-00	Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry (Withdrawn 2009)
E1775-20	Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
E1792-20	Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
E1864-02	Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures (Withdrawn 2011)
E1979-21	Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
E2239-20	Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities