Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM D116-86(2016) 1.7.2016 náhled

Doplňující informace

ASTM D116-86(2016)

Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications

Přeložit název

NORMA vydána dne 1.7.2016

Jazyk
Provedení	PDF - okamžité stažení - 1 761.10 Kč Tištěné - 1 761.10 Kč
Dostupnost	SKLADEM
Cena	1 761.10 Kč bez DPH
1 761.10 Kč

Informace o normě:

Označení normy: ASTM D116-86(2016)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.7.2016
Kód zboží: NS-642251
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Výrobky ze skla
Keramika obecně

Anotace textu normy ASTM D116-86(2016) :

Keywords:
ceramic electrical insulation, electrical insulation, electrical resistivity, porcelain, porosity, thermal conductivity, thermal expansion, vitrified ceramics ,, ICS Number Code 81.040.30 (Glass products),81.060.01 (Ceramics in general)

Doplňující informace

Significance and Use

3.1 For any given ceramic composition, one or more of the properties covered herein may be of more importance for a given insulating application than the other properties. Thus, it may be appropriate that selected properties be specified for testing these ceramic materials.

3.2 Pertinent statements of the significance of individual properties may be found in the sections pertaining to such properties.

1. Scope

1.1 These test methods outline procedures for testing samples of vitrified ceramic materials that are to be used as electrical insulation. Where specified limits are mentioned herein, they shall not be interpreted as specification limits for completed insulators.

1.2 These test methods are intended to apply to unglazed specimens, but they may be equally suited for testing glazed specimens. The report section shall indicate whether glazed or unglazed specimens were tested.

1.3 The test methods appear as follows:

Procedure

Section

Compressive strength

C773

Dielectric strength

D618, D149

Elastic properties

C623

Electrical resistivity

D618, D257, D1829

Flexural strength

C674, F417

Hardness

C730, E18

Porosity

C373

Relative permittivity and dissipation factor

D150, D2149, D2520

Specific gravity

C20, C329, F77

Thermal conductivity

C177, C408

Thermal expansion

C539, E288

Thermal shock resistance

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precaution statements are given in 11.3, 13.5, and 15.3.

2. Referenced Documents

C773-88(2020)	Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
C623-21	Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
D150-22	Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
E18-22	Standard Test Methods for Rockwell Hardness of Metallic Materials
F417-78(1996)	Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
F77-69(1996)	Test Method for Apparent Density of Ceramics for Electron Device and Semiconductor Application (Withdrawn 2001)
E288-10(2017)	Standard Specification for Laboratory Glass Volumetric Flasks
D2520-21	Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650 ?C
D2149-13(2021)	Standard Test Method for Permittivity (Dielectric Constant) and Dissipation Factor of Solid Dielectrics at Frequencies to 10 MHz and Temperatures to 500 ?C
D1829-90(1999)	Standard Test Method for Electrical Resistance of Ceramic Materials at Elevated Temperatures (Withdrawn 2001)
C408-88(2020)	Standard Test Method for Thermal Conductivity of Whiteware Ceramics
C373-18(2023)	Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products
C329-88(2020)	Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
C177-19e1	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).
C20-00(2022)	Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
D257-14(2021)e1	Standard Test Methods for DC Resistance or Conductance of Insulating Materials (Includes all amendments and changes 5/6/2021).
C674-13(2023)	Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
C730-98(2021)	Standard Test Method for Knoop Indentation Hardness of Glass
D149-20	Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
D618-21	Standard Practice for Conditioning Plastics for Testing
C539-84(2021)	Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
D638-22	Standard Test Method for Tensile Properties of Plastics

Doporučujeme:

EviNor - Řízení a aktualizace českých norem