Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM B746/B746M-16 1.11.2016 náhled

Doplňující informace

ASTM B746/B746M-16

Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

Přeložit název

NORMA vydána dne 1.11.2016

Jazyk
Provedení	PDF - okamžité stažení - 1 753.50 Kč Tištěné - 1 753.50 Kč
Dostupnost	SKLADEM
Cena	1753.50 Kč bez DPH
1 753.50 Kč

Informace o normě:

Označení normy: ASTM B746/B746M-16
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2016
Kód zboží: NS-668445
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Výrobky z hliníku

Anotace textu normy ASTM B746/B746M-16 :

Keywords:

aluminum structural plate, arches, culverts, field bolted structures, pipe, pipe arches,, ICS Number Code 77.150.10 (Aluminium products)

Doplňující informace

1. Scope

1.1 This specification covers corrugated aluminum alloy structural plate used in the construction of pipe, pipe-arches, arches, underpasses, box culverts, and special shapes for field assembly. Appropriate fasteners are also described. The pipe, arches, and other shapes are generally used for drainage purposes, pedestrian and vehicular underpasses, and utility tunnels. Aluminum box culvert shapes are covered in Specification B864/B864M.

1.2 This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and plate thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of plate thickness, type of bedding and backfill, controlled manufacture in the plant, and care in the installation. The purchaser must correlate the above factors and also the corrosion and abrasion requirements of the field installation with the plate thickness. The structural design of corrugated aluminum structural plate pipe and the proper installation procedures are given in Practices B790/B790M and B789/B789M, respectively. A procedure for using life-cycle cost analysis techniques to evaluate alternate drainage system designs using corrugated metal pipe is given in Practice A930.

1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other.

2. Referenced Documents

B209-14	Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B209M-14	Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric) (Withdrawn 2021)
B221-21	Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B221M-21	Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
B695-21	Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
B790/B790M-16(2021)	Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
B864/B864M-19	Standard Specification for Corrugated Aluminum Box Culverts
F467M-06a(2018)	Standard Specification for Nonferrous Nuts for General Use (Metric) (Includes all amendments and changes 9/20/2018).
F468-23	Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
F468M-06(2018)	Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
F568M-07	Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Withdrawn 2012)
F593-22	Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
F836M-20	Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) (Withdrawn 2023)
B18.2.1	Square and Hex Bolts and Screws, Inch Series
B18.2.2
F467-13(2018)	Standard Specification for Nonferrous Nuts for General Use
F594-22	Standard Specification for Stainless Steel Nuts
F738M-02	Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
B18.2.3.6M	Bolts, Metric, Heavy Hex
B18.2.4.6M
B666/B666M-20	Standard Practice for Identification Marking of Aluminum and Magnesium Products
B789/B789M-16(2021)	Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
A153/A153M-23	Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A307-21	Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
A449-14(2020)	Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A563-15	Standard Specification for Carbon and Alloy Steel Nuts
A563M-07	Standard Specification for Carbon and Alloy Steel Nuts [Metric]
A930-09(2020)	Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

Doporučujeme:

EviNor - Řízení a aktualizace českých norem

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.