Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM B745/B745M-97

Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

Automaticky přeložený název:

Standardní specifikace pro vlnité hliníkové trubky pro kanalizace a Přepady

NORMA vydána dne 10.10.1997

Jazyk
Provedení	Online zabezpečené PDF - 1 800.00 Kč Tištěné - 1 800.00 Kč
Dostupnost	SKLADEM
Cena	1800.00 Kč bez DPH
1 800.00 Kč

Informace o normě:

Označení normy: ASTM B745/B745M-97
Poznámka: NEPLATNÁ
Datum vydání normy: 10.10.1997
Kód zboží: NS-7929
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM B745/B745M-97 :

Keywords:

torm sewer/drainage pipe-Al/Al alloy, corrugated aluminum pipe forsewers/drains, spec, ICS Number Code 23.040.15 (Non-ferrous metal pipes)

Doplňující informace

1. Scope

1.1 This specification covers corrugated aluminum pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe covered by this specification is not normally used for the conveyance of sanitary or industrial wastes.

1.2 This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and sheet thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of sheet thickness, type of bedding and backfill, controlled manufacture in the plant, and care in the installation. The purchaser must correlate the above factors and also the corrosion and abrasion requirements of the field installation with the sheet thickness. The structural design of corrugated aluminum pipe and the proper installation procedures are given in Practices B790 and B788, respectively. A procedure for using life-cycle cost analysis techniques to evaluate alternative drainage system designs using corrugated metal pipe is given in Practice A930.

1.3 This specification is applicable to orders in either inch-pound units as B745 or SI units as B745M. Inch-pound units and SI units are not necessarily equivalent. SI units are shown in brackets in the text; they are the applicable values when the material is ordered to B745M.

2. Referenced Documents

B633-23	Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
B695-21	Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
F467M-06a(2025)	Standard Specification for Nonferrous Nuts for General Use (Metric) (Includes all amendments and changes 12/16/2025).
B788/B788M-09(2025)	Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
B790/B790M-16(2021)	Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
F467-24(2026)	Standard Specification for Nonferrous Nuts for General Use
C443-21	Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
D1056-20	Standard Specification for Flexible Cellular Materials´Sponge or Expanded Rubber
A153/A153M-23	Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A307-21	Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
A563-15	Standard Specification for Carbon and Alloy Steel Nuts
A930-09(2026)	Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
B209-14	Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B666/B666M-20	Standard Practice for Identification Marking of Aluminum and Magnesium Products
B744/B744M-15(2020)	Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
F738M-02	Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
F468-23(2026)	Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
F468M-06(2025)	Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
F568M-07	Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Withdrawn 2012)
F593-24	Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
F594-24	Standard Specification for Stainless Steel Nuts
B316/B316M-25	Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
B221M-21	Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
B221-21	Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
F836M-20	Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) (Withdrawn 2023)
A563M-07	Standard Specification for Carbon and Alloy Steel Nuts [Metric]
B209M-14	Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric) (Withdrawn 2021)

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.