Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
Automaticky přeložený název:
Standard Specification pro nikl-chrom-železo-molybden-slitiny mědi Plechy a pásky
NORMA vydána dne 1.2.2013
Označení normy: ASTM B582-07(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.2.2013
Kód zboží: NS-7270
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
plate, sheet, strip, N06007, N60975, N06985, N06030, ICS Number Code 77.150.40 (Nickel and chromium products)
1. Scope | |||||
1.1 The specification2 covers plate, sheet, and strip of nickel-chromium-iron-molybdenum-copper alloys (UNS N06007, N06975, N06985, and N06030)* as shown in Table 1, for use in general corrosive service. Element |
Composition Limits, % |
||||
|
Alloy N06007 |
Alloy N06975 |
Alloy N06985 |
Alloy N06030 |
|
Nickel |
|
remainderA |
47.0 to 52.0 |
remainderA |
remainderA |
Chromium |
|
21.0 to 23.5 |
23.0 to 26.0 |
21.0 to 23.5 |
28.0 to 31.5 |
Iron |
|
18.0 to 21.0 |
remainderA |
18.0 to 21.0 |
13.0 to 17.0 |
Molybdenum |
|
5.5 to 7.5 |
5.0 to 7.0 |
6.0 to 8.0 |
4.0 to 6.0 |
Copper |
|
1.5 to 2.5 |
0.70 to 1.20 |
1.5 to 2.5 |
1.0 to 2.4 |
Manganese |
|
1.0 to 2.0 |
1.0 max |
1.0 max |
1.5 max |
Cobalt, max |
|
2.5 |
... |
5.0 |
5.0 |
Carbon, max |
|
0.05 |
0.03 |
0.015 |
0.03 |
Tungsten |
|
1.0 max |
... |
1.5 max |
1.5 to 4.0 |
Silicon, max |
|
1.0 |
1.0 |
1.0 |
0.8 |
Phosphorus, max |
|
0.04 |
0.03 |
0.04 |
0.04 |
Sulfur, max |
|
0.03 |
0.03 |
0.03 |
0.02 |
Columbium + tantalum |
|
1.75 to 2.50 |
... |
0.50 max |
0.30 to 1.50 |
Titanium |
|
... |
0.70–1.50 |
... |
... |
1.2.1 Sheet and Strip—Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish.
1.2.2 Plate—Hot or cold rolled, solution annealed, and descaled.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
Historická
1.10.2009
Historická
1.5.2011
Historická
1.3.2008
Historická
1.10.2013
Historická
1.10.2009
Historická
1.10.2013
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 26.04.2024 (Počet položek: 2 896 057)
© Copyright 2024 NORMSERVIS s.r.o.