Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
Automaticky přeložený název:
Standardní specifikace pro nikl-chrom-molybdenové-niob slitiny (UNS N06625 a UNS N06852) a nikl-chrom-molybdenové-křemík (UNS N06219) Potrubní
NORMA vydána dne 1.5.2011
Označení normy: ASTM B444-06(2011)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2011
Kód zboží: NS-6719
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
seamless pipe, seamless tube, N06219, N06625, Nickel alloy pipe--specifications, Nickel alloy tube--specifications, Nickel-chromium alloys--specifications, Nickel-chromium-molybdenum-columbium alloys--specifications, Udimet alloy, UNS N06219 (Ni-Cr-Mo-Si alloy, Nicrofer 6219Si), UNS N06625 (Ni-Cr alloy, Inconel 625), ICS Number Code 77.150.40 (Nickel and chromium products)
1. Scope | ||||||||
1.1 This specification covers nickel-chromium-molybdenum-columbium alloys (UNS N06625 and UNS N06852) and nickel-chromium-molybdenum-silicon alloy (UNS N06219)* in the form of cold-worked seamless pipe and tube. The general requirements for pipe and tube are covered by Specification B829. 1.1.1 UNS N06625 products are furnished in two grades of different heat-treated conditions: 1.1.1.1 Grade 1 (annealed)—Material is normally employed in service temperatures up to 1100°F (593°C). 1.1.1.2 Grade 2 (solution annealed)—Material is normally employed in service temperatures above 1100°F (593°C) when resistance to creep and rupture is required. Note 1—Hot-working or reannealing may change properties significantly, depending on working history and temperatures. 1.1.2 Alloys UNS N06219 and UNS N06852 are supplied in the solution annealed condition only. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following precautionary caveat pertains only to the test methods portion, Section 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use. |
||||||||
2. Referenced Documents | ||||||||
|
Historická
1.3.2008
Historická
1.10.2011
Historická
1.10.2011
Historická
1.10.2011
Historická
1.2.2013
Historická
1.2.2013
Poslední aktualizace: 13.05.2024 (Počet položek: 2 898 634)
© Copyright 2024 NORMSERVIS s.r.o.