Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM B166-11

Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,

Automaticky přeložený název:

Standardní specifikace pro nikl-chrom-slitin železa (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045 a N06696), * Nikl-Chrom-Cobalt-molybden (UNS N06617), a nikl-železo-chromem Tungsten Alloy (UNS N06674) Rod, Bar,

NORMA vydána dne 1.10.2011

Jazyk
Provedení	PDF - okamžité stažení - 1 761.20 Kč Tištěné - 1 761.20 Kč
Dostupnost	SKLADEM
Cena	1 761.20 Kč bez DPH
1 761.20 Kč

Informace o normě:

Označení normy: ASTM B166-11
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2011
Kód zboží: NS-5558
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Výrobky z niklu a chrómu

Anotace textu normy ASTM B166-11 :

Keywords:
bar, rod, wire, UNS N06025, UNS N06045, UNS N06600, UNS N06601, UNS N06603, UNS N06617, UNS N06674, UNS N06690, UNS N06693, UNS N06696: UNS N06693 (Ni-Cr-Fe-Al-CB alloy, Inconel 693), Incoloy/Inconel, Nickel alloy rod/bar/wire--specifications, Nickel-chromium alloys--specifications, Nickel-chromium-cobalt-molybdenum alloy--specifications, Nickel-chromium-iron alloys--specifications, UNS N06025 (Ni-Cr-Fe-Al alloy, Nicofer 6025 HT), UNS N06045 (Ni-Cr-Fe-Si alloy, Nicrofer 45)

Doplňující informace

1. Scope

1.1 This specification covers nickel-chromium-iron alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* nickel-chromium-cobalt-molybdenum alloy (UNS N06617), and nickel-iron-chromium-tungsten (UNS N06674) alloy in the form of hot-finished and cold-worked rounds, squares, hexagons, rectangles, and cold-worked wire.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 The following precautionary caveat pertains only to the test methods portion, Section 12, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E38-85	Methods for Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys (Withdrawn 1989)
E112-13(2021)	Standard Test Methods for Determining Average Grain Size
MIL-STD-129	Marking for Shipment and Storage
B168-19e1	Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip (Includes all amendments and changes 10/20/2022).
B880-14(2019)	Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
E8-04	Standard Test Methods for Tension Testing of Metallic Materials
E18-22	Standard Test Methods for Rockwell Hardness of Metallic Materials
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E140-12B(2019)e1	Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness (Includes all amendments and changes 5/7/2019).
E527-23	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E1473-22	Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
Fed. Std. No. 182	Continuous Identification Marking of Nickel and Nickel-Base Alloys