Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
Automaticky přeložený název:
Standard Specification pro nikl-molybden Plate, list, a Gazy
NORMA vydána dne 1.2.2013
Označení normy: ASTM B333-03(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.2.2013
Kód zboží: NS-6273
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
plate, sheet, strip, UNS N10001, UNS N10629, UNS N10665, UNS N10675, UNS N10624, ICS Number Code 77.150.40 (Nickel and chromium products)
1. Scope | |||||
1.1 This specification2 covers plate, sheet, and strip of nickel-molybdenum alloys (UNS N10001, N10665, N10675, N10629, and N10624)* as shown in Table 1, for use in general corrosive service. Element |
Composition Limits, % |
|
|||
Alloy |
Alloy |
Alloy |
Alloy |
Alloy |
|
Nickel |
remainderA |
remainderA |
65.0 min |
remainderA |
Bal |
Molybdenum |
26.0–30.0 |
26.0–30.0 |
27.0–32.0 |
26.0–30.0 |
21.0-25.0 |
Iron |
4.0–6.0 |
2.0 max |
1.0–3.0 |
1.0–6.0 |
5.0-8.0 |
Chromium |
1.0 max |
1.0 max |
1.0–3.0 |
0.5–1.5 |
6.0-10.0 |
Carbon, max |
0.05 |
0.02 |
0.01 |
0.01 |
0.01 |
Silicon, max |
1.0 |
0.10 |
0.10 |
0.05 |
0.10 |
Cobalt, max |
2.5 |
1.00 |
3.0 |
2.5 |
1.0 |
Manganese, |
1.0 |
1.0 |
3.0 |
1.5 |
1.0 |
Phosphorus, |
0.04 |
0.04 |
0.030 |
0.04 |
0.025 |
Sulfur, max |
0.03 |
0.03 |
0.010 |
0.01 |
0.01 |
Vanadium |
0.2–0.4 |
... |
0.20 max |
... |
... |
Nickel plus |
... |
... |
94.0–98.0 |
|
... |
Aluminum |
... |
... |
0.50 max |
0.1–0.5 |
0.5 |
Columbium |
... |
... |
0.20 |
|
... |
Copper, max |
... |
... |
0.20 |
0.5 |
0.5 |
Tantalum, |
... |
... |
0.20 |
|
... |
Titanium, |
... |
... |
0.20 |
|
... |
Tungsten, |
... |
... |
3.0 |
|
... |
Zirconium, |
... |
... |
0.10 |
|
... |
Magnesium, |
... |
... |
... |
... |
... |
Alloy
Thickness,
in. (mm)
Tensile Strength,
min, psi (MPa)
Yield Strength
(0.2 % Offset),
min, psi (MPa)
Elongation
in 2 in.
(50.8 mm)
or 4DA
min, %
Rockwell
Hardness,B
max
Sheet and Strip
N10001
Under 3/16 (4.76)
115 000 (795)
50 000 (345)
45
100 HRB
N10665
Under 3/16 (4.76)
110 000 (760)
51 000 (350)
40
100 HRB
N10675
Under 3/16 (4.76)
110 000 (760)
51 000 (350)
40
100 HRB
N10629
Under 3/16 (4.76)
110 000 (760)
51 000 (350)
40
100 HRB
N10624
Under 3/16 (4.76)
104 000 (720)
46 000 (320)
40
100 HRB
Plate
N10001
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
100 000 (690)
45 000 (310)
40
100 HRB
N10665
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
110 000 (760)
51 000 (350)
40
100 HRB
N10675
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
110 000 (760)
51 000 (350)
40
100 HRB
N10629
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
110 000 (760)
51 000 (350)
40
100 HRB
N10624
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
104 000 (720)
46 000 (320)
40
100 HRB
1.2.1 Sheet and Strip—Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish.
1.2.2 Plate—Hot or cold rolled, solution annealed, and descaled.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
|
Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness (Includes all amendments and changes 5/7/2019). |
|
Standard Test Methods for Determining Average Grain Size |
Historická
1.6.2011
Historická
1.5.2012
Historická
1.1.2010
Historická
1.8.2012
Historická
1.10.2013
Historická
1.2.2014
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 01.05.2024 (Počet položek: 2 896 514)
© Copyright 2024 NORMSERVIS s.r.o.