Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM B111/B111M-04

Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

Automaticky přeložený název:

Standardní specifikace pro mědi a měděných slitin bezešvých trubek kondenzátoru a dutinkou skladě

NORMA vydána dne 1.10.2004

Jazyk
Provedení	Online zabezpečené PDF - 2 041.80 Kč Tištěné - 2 041.80 Kč
Dostupnost	SKLADEM
Cena	2041.80 Kč bez DPH
2 041.80 Kč

Informace o normě:

Označení normy: ASTM B111/B111M-04
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2004
Kód zboží: NS-5352
Počet stran: 11
Přibližná hmotnost: 33 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM B111/B111M-04 :

Keywords:

condenser tube, copper, copper alloys, evaporator, ferrule stock, heat exchanger, seamless tube , UNS No. C10100, UNS No. C10200, UNS No. C10300, UNS No. C10800, UNS No. C12000, UNS No. C12200, UNS No. C14200, UNS No. C19200, UNS No. C23000, UNS No. C28000, UNS No. C44300, UNS No. C44400, UNS No. C44500, UNS No. C60800, UNS No. C61300, UNS No. C61400, UNS No. C68700, UNS No. C70400, UNS No. C70600, UNS No. C70620, UNS No. C71000, UNS No. C71500, UNS No. C71520, UNS No. C71640, UNS No. C

Doplňující informace

1. Scope

1.1 This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 31/8 in. [80 mm] inclusive, in diameter, for use in surface condensers, evaporators, and heat exchangers. The following coppers and copper alloys are specified: (Warning-Mercury is a definite health hazard in use and disposal. (See 12.1.))

Designations listed in Classification B 224.

Copper orCopper AlloyUNS No.	PreviouslyUsed Designation	Description

C10100	OFE	Oxygen-free electronic
C10200	OF	Oxygen-free without residual deoxidants
C10300	. . .	Oxygen-free, extra low phosphorus
C10800	. . .	Oxygen-free, low phosphorus
C12000	DLP	Phosphorized, low residual phosphorus
C12200	DHP	Phosphorized, high residual phosphorus
C14200	DPA	Phosphorized, arsenical
C19200	. . .	Phosphorized, 1 % iron
C23000	. . .	Red Brass
C28000	. . .	Muntz Metal
C44300	. . .	Admiralty Metals, B, C, and D
C44400
C44500
C60800	. . .	Aluminum Bronze
C61300	. . .	. . .
C61400	. . .	Aluminum Bronze, D
C68700	. . .	Aluminum Brass, B
C70400	. . .	95-5 Copper-Nickel
C70600	. . .	90-10 Copper-Nickel
C70620	. . .	90-10 Copper-Nickel-Welding Grade
C71000	. . .	80-20 Copper-Nickel
C71500	. . .	70-30 Copper-Nickel
C71520	. . .	70-30 Copper-Nickel-Welding Grade
C71640	. . .	Copper-nickel-iron-manganese
C72200	. . .	. . .

1.2 UnitsValues stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 The following safety hazards caveat pertains only to the test methods portion, Section 19, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E118-89(1996)	Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys
E53-07	Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
E76-88(1998)	Standard Test Methods for Chemical Analysis of Nickel-Copper Alloys (Withdrawn 2003)
E75-76(1996)	Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys
E62-89(1996)	Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
E54-80(1996)	Standard Test Methods for Chemical Analysis of Special Brasses and Bronzes (Withdrawn 2002)
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E2575-19	Standard Test Method for Determination of Oxygen in Copper and Copper Alloys by Inert Gas Fusion
E527-23	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E478-24	Standard Test Methods for Chemical Analysis of Copper Alloys
E255-23	Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
E112-25	Standard Test Methods for Determining Average Grain Size
B968/B968M-16(2022)	Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
B153-22	Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
B858-06(2024)	Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
B846-24	Standard Terminology for Copper and Copper Alloys
B224-16(2022)	Standard Classification of Coppers
B170-24	Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
E243-24	Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes
B154-16(2022)	Standard Test Method for Mercurous Nitrate Test for Copper Alloys
E8/E8M-25	Standard Test Methods for Tension Testing of Metallic Materials

Doporučujeme:

EviZak - všechny zákony včetně jejich evidence na jednom místě

Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.