Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Označení normy: ASTM B224-16(2022)
Datum vydání normy: 1.10.2022
Kód zboží: NS-1086278
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
classification, coppers,, ICS Number Code 77.120.30 (Copper and copper alloys)
Significance and Use | ||||
4.1?This classification lists the types of copper available from refineries or fabricators, or both, defines the common terms used, and gives the characteristics of many of the coppers available. It is useful to the neophyte looking for the appropriate copper for a particular application. |
||||
1. Scope | ||||
1.1?This is a classification of the various types of copper currently available in refinery shapes and wrought products in commercial quantities. It is not a specification for the various types of copper. 1.2?In this classification, use is made of the standard copper designations in use by the copper industry. 1.3?Although this classification includes certain UNS designations as described in Practice E527, these designations are for cross-reference only and are not requirements. Therefore, in case of conflict, this ASTM classification shall govern. 1.4?This classification does not attempt to differentiate between all compositions that could be termed either coppers or copper-base alloys, but in conformance with general usage in the trade, includes those coppers in which the copper plus specific permitted elements is specified as 99.85 % or more, silver being counted as copper except in the case of UNS C10100 and C11040 where silver is not counted as copper. Note 1:?Coppers may contain small amounts of certain elements
intentionally permitted to impart specific properties, without
excessively lowering electrical conductivity. The total copper plus
specific permitted elements is specified as 99.85 % or more. These
intentionally permitted elements normally include, but are not
limited to, arsenic, cadmium, chromium, lead, magnesium, silver,
sulfur, tellurium, tin, zinc, and zirconium, plus deoxidizers, up
to specific levels adopted by the International Standards
Organization.
1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||
2. Referenced Documents | ||||
|
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 21.11.2024 (Počet položek: 2 206 478)
© Copyright 2024 NORMSERVIS s.r.o.