Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM Volume 15.03 - Space Simulation; Aerospace and Aircraft; Composite Materials
ASTM Volume 15.03 - Space Simulation; Aerospace and Aircraft; Composite Materials
Přeložit název
PUBLIKACE vydána dne 1.10.2021
| Dostupnost | Vyprodáno |
| Cena | NA DOTAZ bez DPH |
| NA DOTAZ |
Informace o produktu:
Označení: ASTM Volume 15.03 - Space Simulation; Aerospace and Aircraft; Composite Materials
Počet stran: 1668
Přibližná hmotnost: 5035 g (11.10 liber)
Datum vydání: 1.10.2021
Země: Americká publikace
Anotace textu normy :
These standards cover: Space Simulation —specifications and practices cover contamination of cleanrooms and controlled environments, space simulation, and thermal protection. Aerospace and Aircraft —standards deal with cleaning materials, flammability, contamination, hydrogen embrittlement, transparent enclosures, and materials. Composite Materials—test methods assess properties of high modulus fibers, interlaminar properties, laminates, sandwich construction, and structural test methods.
Table of Contents
| C271/C271M-16 | Standard Test Method for Density of Sandwich Core Materials |
| C272/C272M-18 | Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions |
| C273/C273M-20 | Standard Test Method for Shear Properties of Sandwich Core Materials |
| C297/C297M-16 | Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions |
| C363/C363M-16 | Standard Test Method for Node Tensile Strength of Honeycomb Core Materials |
| C364/C364M-16 | Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions |
| C365/C365M-16 | Standard Test Method for Flatwise Compressive Properties of Sandwich Cores |
| C366/C366M-16 | Standard Test Methods for Measurement of Thickness of Sandwich Cores |
| C393/C393M-20 | Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure |
| C394/C394M-16 | Standard Test Method for Shear Fatigue of Sandwich Core Materials |
| C480/C480M-16 | Standard Test Method for Flexure Creep of Sandwich Constructions |
| C481-99(2016) | Standard Test Method for Laboratory Aging of Sandwich Constructions |
| C613-19 | Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction |
| D2344/D2344M-16 | Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
| D3039/D3039M-17 | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
| D3171-15 | Standard Test Methods for Constituent Content of Composite Materials |
| D3410/D3410M-16e1 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
| D3479/D3479M-19 | Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials |
| D3518/D3518M-18 | Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate |
| D3529-16 | Standard Test Methods for Constituent Content of Composite Prepreg |
| D3530-20 | Standard Test Method for Volatiles Content of Composite Material Prepreg |
| D3531/D3531M-16 | Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg |
| D3532/D3532M-19 | Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg |
| D3552-17 | Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites |
| D3800-16 | Standard Test Method for Density of High-Modulus Fibers |
| D3878-20b | Standard Terminology for Composite Materials |
| D4018-17 | Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows |
| D4102-82(2015) | Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers |
| D4255/D4255M-20 | Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method |
| D4762-18 | Standard Guide for Testing Polymer Matrix Composite Materials |
| D5229/D5229M-20 | Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials |
| D5379/D5379M-19e1 | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
| D5448/D5448M-16 | Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| D5449/D5449M-16 | Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| D5450/D5450M-16 | Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| D5467/D5467M-97(2017) | Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam |
| D5528-13 | Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| D5687/D5687M-20 | Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation |
| D5766/D5766M-11(2018) | Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates |
| D5961/D5961M-17 | Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates |
| D6115-97(2019) | Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| D6264/D6264M-17 | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force |
| D6415/D6415M-06a(2013) | Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite |
| D6416/D6416M-16e1 | Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load |
| D6484/D6484M-20 | Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates |
| D6507-19 | Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials |
| D6641/D6641M-16e2 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture |
| D6671/D6671M-19 | Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites |
| D6742/D6742M-17 | Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates |
| D6772/D6772M-16 | Standard Test Method for Dimensional Stability of Sandwich Core Materials |
| D6790/D6790M-16 | Standard Test Method for Determining Poissons Ratio of Honeycomb Cores |
| D6856/D6856M-03(2016) | Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials |
| D6873/D6873M-19 | Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates |
| D7028-07(2015) | Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA) |
| D7078/D7078M-20e1 | Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method |
| D7136/D7136M-20 | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event |
| D7137/D7137M-17 | Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates |
| D7205/D7205M-21 | Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
| D7248/D7248M-21 | Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
| D7249/D7249M-20 | Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure |
| D7250/D7250M-20 | Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness |
| D7264/D7264M-21 | Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials |
| D7290-06(2017) | Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications |
| D7291/D7291M-15 | Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material |
| D7332/D7332M-16 | Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite |
| D7336/D7336M-16 | Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials |
| D7337/D7337M-12(2019) | Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars |
| D7522/D7522M-21 | Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete or Masonry Substrates |
| D7565/D7565M-10(2017) | Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures |
| D7615/D7615M-19 | Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates |
| D7616/D7616M-11(2017) | Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures |
| D7617/D7617M-11(2017) | Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars |
| D7705/D7705M-12(2019) | Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction |
| D7750-12(2017) | Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer |
| D7766/D7766M-16 | Standard Practice for Damage Resistance Testing of Sandwich Constructions |
| D7905/D7905M-19e1 | Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| D7913/D7913M-14(2020) | Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing |
| D7914/D7914M-21 | Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations |
| D7956/D7956M-16 | Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen |
| D7957/D7957M-17 | Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement |
| D7958/D7958M-17 | Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test |
| D8066/D8066M-17 | Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates |
| D8067/D8067M-17 | Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture |
| D8101/D8101M-18 | Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile |
| D8131/D8131M-17e1 | Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates |
| D8132/D8132M-17 | Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement |
| D8285/D8285M-19 | Standard Practice for Compressive Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates by Sandwich Construction Long Beam Flexure |
| D8335-20 | Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials |
| D8336-21 | Standard Test Method for Characterizing Tack of Prepregs Using a Continuous Application-and-Peel Procedure |
| D8337/D8337M-21 | Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear Test |
| D8387/D8387M-21 | Standard Test Method for High Bypass – Low Bearing Interaction Response of Polymer Matrix Composite Laminates |
| E285-08(2020) | Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials |
| E295-82(2019) | Standard Test Method for Measured Speed of Oil Diffusion Pumps |
| E296-70(2020) | Standard Practice for Ionization Gage Application to Space Simulators |
| E307-72(2019) | Standard Test Method for Normal Spectral Emittance at Elevated Temperatures |
| E341-08(2020) | Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance |
| E349-06(2019)e1 | Standard Terminology Relating to Space Simulation |
| E377-08(2020) | Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials |
| E408-13(2019) | Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques |
| E422-05(2016) | Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter |
| E423-71(2019) | Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens |
| E434-10(2020) | Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation |
| E457-08(2020) | Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter |
| E458-08(2020) | Standard Test Method for Heat of Ablation |
| E459-05(2016) | Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter |
| E471-96(2016) | Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing |
| E490-00a(2019) | Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables |
| E491-73(2020) | Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft |
| E511-07(2020) | Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer |
| E512-94(2020) | Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation |
| E595-15(2021) | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| E598-08(2020) | Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter |
| E637-05(2016) | Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure |
| E834-21 | Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger |
| E1216-11(2016) | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| E1234-12(2020) | Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| E1235-12(2020)e1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| E1548-09(2017) | Standard Practice for Preparation of Aerospace Contamination Control Plans |
| E1549/E1549M-13(2016) | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| E1559-09(2016) | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| E1560-18 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
| E1731-11(2018) | Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves |
| E1922-04(2015) | Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials |
| E1997-15 | Standard Practice for the Selection of Spacecraft Materials |
| E2042/E2042M-09(2016) | Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms |
| E2088-06(2015) | Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments |
| E2089-15(2020) | Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications |
| E2090-12(2020) | Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy |
| E2217-12(2019) | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| E2311-04(2021) | Standard Practice for QCM Measurement of Spacecraft Molecular Contamination in Space |
| E2312-11(2019) | Standard Practice for Tests of Cleanroom Materials |
| E2352-19 | Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations |
| E2683-17 | Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages |
| E2684-17 | Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages |
| E2900-19 | Standard Practice for Spacecraft Hardware Thermal Vacuum Bakeout |
| E3057-19 | Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques |
| F21-20 | Standard Test Method for Hydrophobic Surface Films by the Atomizer Test |
| F22-13(2021) | Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
| F24-20 | Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces |
| F25/F25M-21 | Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas |
| F50-21 | Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles |
| F51/F51M-20 | Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments |
| F91-06(2019) | Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector |
| F302-09(2015) | Standard Practice for Field Sampling of Aerospace Fluids in Containers |
| F303-08(2016) | Standard Practices for Sampling for Particles in Aerospace Fluids and Components |
| F307-13(2020) | Standard Practice for Sampling Pressurized Gas for Gas Analysis |
| F309-18 | Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants |
| F310-07(2020) | Standard Practice for Sampling Cryogenic Aerospace Fluids |
| F311-08(2020) | Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters |
| F312-08(2016) | Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters |
| F319-19 | Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements |
| F320-21 | Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures |
| F326-17 | Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes |
| F327-08(2015) | Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method |
| F330-21 | Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures |
| F331-13(2020) | Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator) |
| F428-19 | Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures |
| F482-09(2020) | Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals |
| F483-09(2020) | Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals |
| F484-08(2019) | Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds |
| F485-08(2019) | Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces |
| F502-08(2019) | Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces |
| F519-18 | Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
| F520-21 | Standard Test Method for Environmental Resistance of Aerospace Transparencies to Artificially Induced Exposures |
| F521-16 | Standard Test Methods for Bond Integrity of Transparent Laminates |
| F548-19 | Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics |
| F733-19 | Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method |
| F734-17 | Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material |
| F735-17 | Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method |
| F736-17 | Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight |
| F790-18 | Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
| F791-18 | Standard Test Method for Stress Crazing of Transparent Plastics |
| F801-21 | Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts |
| F862-11(2017) | Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids |
| F942-18 | Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures |
| F945-12(2019) | Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials |
| F1080-93(2019) | Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer |
| F1104-02(2019) | Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing |
| F1105-09(2020) | Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing |
| F1110-09(2020) | Standard Test Method for Sandwich Corrosion Test |
| F1111-08b(2019) | Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals |
| F1113-87(2017) | Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode) |
| F1164-19 | Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress |
| F1165-20 | Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts |
| F1181-19 | Standard Test Method for Measuring Binocular Disparity in Transparent Parts |
| F1252-21 | Standard Test Method for Measuring Optical Reflectivity of Transparent Materials |
| F1316-18 | Standard Test Method for Measuring the Transmissivity of Transparent Parts |
| F1362-18 | Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials |
| F1459-06(2017) | Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE) |
| F1624-12(2018) | Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique |
| F1645/F1645M-16 | Standard Test Method for Water Migration in Honeycomb Core Materials |
| F1863-16(2021) | Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts |
| F1864-21 | Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings |
| F2078-15 | Standard Terminology Relating to Hydrogen Embrittlement Testing |
| F2108-17 | Standard Practice for Inspection of Transparent Parts by Prism |
| F2109-01(2017) | Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces |
| F2111-01a(2017) | Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes |
| F2156-17 | Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope |
| F2429-15(2021) | Standard Terminology Relating to Aerospace Transparent Materials and Enclosures |
| F2469-20 | Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method |
| F3440-21 | Standard Test Method for Corrosion of Low-Embrittling Zinc-Nickel Plate by Aircraft Maintenance Chemicals |
Doporučujeme:
Aktualizace zákonů
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
