Publikace  ASTM Volume 15.01 - Refractories; Activated Carbon; Advanced Ceramics 1.3.2019 náhled

ASTM Volume 15.01 - Refractories; Activated Carbon; Advanced Ceramics

ASTM Volume 15.01 - Refractories; Activated Carbon; Advanced Ceramics

Přeložit název

PUBLIKACE vydána dne 1.3.2019


Jazyk
Provedení
Dostupnostdo 7 pracovních dnů
Cena7 213.00 bez DPH
7 213.00

Informace o produktu:

Označení: ASTM Volume 15.01 - Refractories; Activated Carbon; Advanced Ceramics
Počet stran: 1298
Přibližná hmotnost: 3925 g (8.65 liber)
Datum vydání: 1.3.2019
Země: Americká publikace
Kategorie: ASTM Section 15 - General Products, Chemical Specialties, and End Use Products

Anotace textu normy :

Refractories — standards establish procedures for evaluating chemical behaviors, thermal properties, and strength. Others cover monolithics and refractories for glass.Activated Carbon — specifications and test methods evaluate the properties of activated carbon, including gas phase evaluation tests and liquid phase evaluation.Advanced Ceramics — standards cover thermal systems including heat engines and heat exchangers; armor; fuel cells; sensors/actuators; electronics; coatings; and catalyst substrates. Most feature tests in the areas of mechanical properties, physical properties, performance, and ceramic composites.


Table of Contents



C16-03(2018)   Standard Test Method for Load Testing Refractory Shapes at High Temperatures
C20-00(2015)   Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
C24-09(2018)   Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials
C27-98(2018)   Standard Classification of Fireclay and High-Alumina Refractory Brick
C71-12(2018)   Standard Terminology Relating to Refractories
C92-95(2015)   Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
C108-46(2018)   Standard Symbols for Heat Transmission
C113-14   Standard Test Method for Reheat Change of Refractory Brick
C133-97(2015)   Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
C134-95(2016)   Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
C135-96(2015)   Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
C155-97(2018)   Standard Classification of Insulating Firebrick
C179-14(2019)   Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
C181-11(2018)   Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics
C182-88(2013)   Standard Test Method for Thermal Conductivity of Insulating Firebrick
C198-09(2019)   Standard Test Method for Cold Bonding Strength of Refractory Mortar
C199-84(2016)   Standard Test Method for Pier Test for Refractory Mortars
C201-93(2019)   Standard Test Method for Thermal Conductivity of Refractories
C202-93(2013)   Standard Test Method for Thermal Conductivity of Refractory Brick
C210-95(2014)   Standard Test Method for Reheat Change of Insulating Firebrick
C288-87(2014)   Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
C357-07(2015)   Standard Test Method for Bulk Density of Granular Refractory Materials
C401-12(2018)   Standard Classification of Alumina and Alumina-Silicate Castable Refractories
C416-97(2018)   Standard Classification of Silica Refractory Brick
C417-05(2015)   Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
C454-10(2017)   Standard Test Method for Disintegration of Carbon Refractories by Alkali
C455-07(2018)   Standard Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick
C456-18   Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
C467-14(2018)   Standard Classification of Mullite Refractories
C492-92(2017)e1   Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
C544-18   Standard Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain
C545-97(2018)   Standard Classification of Zircon Refractories
C577-07(2014)   Standard Test Method for Permeability of Refractories
C583-15   Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
C604-18   Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
C607-88(2016)   Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
C621-09(2018)   Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
C673-97(2018)   Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
C704/C704M-15e1   Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
C767-93(2013)   Standard Test Method for Thermal Conductivity of Carbon Refractories
C830-00(2016)   Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
C831-18   Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
C832-00(2015)   Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
C860-15   Standard Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
C861-93(2014)   Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
C862-16   Standard Practice for Preparing Refractory Concrete Specimens by Casting
C863-00(2016)   Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
C865-17   Standard Practice for Firing Refractory Concrete Specimens
C874-11a   Standard Test Method for Rotary Slag Testing of Refractory Materials
C885-87(2012)   Standard Test Method for Youngs Modulus of Refractory Shapes by Sonic Resonance
C899-79(2018)   Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials
C903-15e1   Standard Practice for Preparing Refractory Specimens by Cold Gunning
C909-18   Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
C914-09(2015)   Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
C973-87(2015)   Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
C974-87(2015)   Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
C975-87(2015)   Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
C987-10(2015)   Standard Test Method for Vapor Attack on Refractories for Furnace Superstructures
C1054-18   Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
C1070-01(2014)   Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
C1099-07(2019)   Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
C1113/C1113M-09(2019)   Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
C1145-06(2013)e1   Standard Terminology of Advanced Ceramics
C1161-18   Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
C1171-16   Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
C1190-18   Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
C1198-09(2013)   Standard Test Method for Dynamic Youngs Modulus, Shear Modulus, and Poissons Ratio for Advanced Ceramics by Sonic Resonance
C1211-18   Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
C1223-09(2018)   Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
C1239-13(2018)   Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
C1259-15   Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
C1273-18   Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
C1274-12   Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
C1275-18   Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
C1291-18   Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
C1292-16   Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1322-15   Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
C1323-16   Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
C1326-13(2018)   Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
C1327-15   Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
C1337-17   Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
C1341-13(2018)   Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
C1358-18   Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
C1359-18e1   Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
C1360-17   Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1361-10(2015)   Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
C1366-04(2013)   Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
C1368-18   Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature
C1407-98(2016)   Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
C1419-14   Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus
C1421-18   Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
C1424-15   Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
C1425-19   Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
C1445-13(2018)   Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
C1446-11   Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
C1465-08(2013)e1   Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
C1468-19   Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
C1469-10(2015)   Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
C1470-06(2013)   Standard Guide for Testing the Thermal Properties of Advanced Ceramics
C1494-13(2018)   Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
C1495-16   Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
C1499-15   Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
C1525-18   Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
C1547-02(2018)   Standard Classification for Fusion-Cast Refractory Blocks and Shapes
C1548-02(2012)   Standard Test Method for Dynamic Youngs Modulus, Shear Modulus, and Poissons Ratio of Refractory Materials by Impulse Excitation of Vibration
C1557-14   Standard Test Method for Tensile Strength and Young’s Modulus of Fibers
C1576-05(2017)   Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
C1624-05(2015)   Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
C1655-06(2016)   Standard Classification of Fireclay and High-Alumina Mortars
C1656-13(2018)   Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
C1674-16   Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
C1678-10(2015)   Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
C1683-10(2015)   Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
C1684-18   Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
C1730-17   Standard Test Method for Particle Size Distribution of Advanced Ceramics by X-Ray Monitoring of Gravity Sedimentation
C1773-17   Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
C1783-15   Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
C1793-15   Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications
C1819-15   Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
C1834-16   Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures
C1835-16   Standard Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures
C1836-16   Standard Classification for Fiber Reinforced Carbon-Carbon Composite Structures
C1862-17   Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
C1863-18   Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
C1869-18   Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
D2652-11   Standard Terminology Relating to Activated Carbon
D2854-09(2014)   Standard Test Method for Apparent Density of Activated Carbon
D2862-16   Standard Test Method for Particle Size Distribution of Granular Activated Carbon
D2866-11(2018)   Standard Test Method for Total Ash Content of Activated Carbon
D2867-17   Standard Test Methods for Moisture in Activated Carbon
D3466-06(2018)   Standard Test Method for Ignition Temperature of Granular Activated Carbon
D3467-04(2014)   Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon
D3802-16   Standard Test Method for Ball-Pan Hardness of Activated Carbon
D3803-91(2014)   Standard Test Method for Nuclear-Grade Activated Carbon
D3838-05(2017)   Standard Test Method for pH of Activated Carbon
D3860-98(2014)   Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
D4069-95(2014)   Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
D4607-14   Standard Test Method for Determination of Iodine Number of Activated Carbon
D5029-98(2014)   Standard Test Method for Water Solubles in Activated Carbon
D5158-98(2013)   Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
D5159-04(2014)   Standard Guide for Dusting Attrition of Granular Activated Carbon
D5160-95(2014)   Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon
D5228-16   Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
D5742-16   Standard Test Method for Determination of Butane Activity of Activated Carbon
D5832-98(2014)   Standard Test Method for Volatile Matter Content of Activated Carbon Samples
D5919-96(2017)   Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
D6385-99(2017)   Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing
D6586-03(2014)   Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests
D6646-03(2014)   Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
D6647-18   Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption
D6781-02(2014)   Standard Guide for Carbon Reactivation
D6851-02(2011)   Standard Test Method for Determination of Contact pH with Activated Carbon
D7385-13   Standard Guide for Estimating Carbon Saturation by Temperature Rise upon Immersion
D8176-18   Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh)

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.


Tento web používá soubory cookie. Dalším procházením tohoto webu vyjadřujete souhlas s jejich používáním. Více informací / Rozumím