Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
Automaticky přeložený název:
Standardní praxe pro přípravu a využívání přímého namáhání tahem korozi na zkušební vzorky
NORMA vydána dne 1.3.2011
Označení normy: ASTM G49-85(2011)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.3.2011
Kód zboží: NS-57708
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
constant load, constant strain, quantitative stress, stress-corrosion cracking, stress-corrosion test specimen, tension specimens, Corrosion--stress-corrosion, Specimen preparation (for testing)--corrosion testing, Stress corrosion cracking (SCC), Uniaxial loading, ICS Number Code 77.060 (Corrosion of metals)
Significance and Use | ||||||||||
Axially loaded tension specimens provide one of the most versatile methods of performing a stress-corrosion test because of the flexibility permitted in the choice of type and size of test specimen, stressing procedures, and range of stress levels. The uniaxial stress system is simple; hence, this test method is often used for studies of stress-corrosion mechanisms. This type of test is amenable to the simultaneous exposure of unstressed specimens (no applied load) with stressed specimens and subsequent tension testing to distinguish between the effects of true stress corrosion and mechanical overload (2). Additional considerations in regard to the significance of the test results and their interpretation are given in Sections 6 and 10. Wide variations in test results may be obtained for a given material and specimen orientation with different specimen sizes and stressing procedures. This consideration is significant especially in the standardization of a test procedure for interlaboratory comparisons or quality control. |
||||||||||
1. Scope | ||||||||||
1.1 This practice covers procedures for designing, preparing, and using ASTM standard tension test specimens for investigating susceptibility to stress-corrosion cracking. Axially loaded specimens may be stressed quantitatively with equipment for application of either a constant load, constant strain, or with a continuously increasing strain. 1.2 Tension test specimens are adaptable for testing a wide variety of product forms as well as parts joined by welding, riveting, or various other methods. 1.3 The exposure of specimens in a corrosive environment is treated only briefly because other standards are being prepared to deal with this aspect. Meanwhile, the investigator is referred to Practices G35, G36, G37, and G44, and to ASTM Special Technical Publication 425 (1). |
||||||||||
2. Referenced Documents | ||||||||||
|
Poslední aktualizace: 13.11.2024 (Počet položek: 2 210 764)
© Copyright 2024 NORMSERVIS s.r.o.