Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM F468-22

Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

Přeložit název

NORMA vydána dne 1.11.2022

Jazyk
Provedení	PDF - okamžité stažení - 1 914.00 Kč Tištěné - 1 914.00 Kč
Dostupnost	SKLADEM
Cena	1914.00 Kč bez DPH
1 914.00 Kč

Informace o normě:

Označení normy: ASTM F468-22
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2022
Kód zboží: NS-1103060
Počet stran: 15
Přibližná hmotnost: 45 g (0.10 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Svorníky, šrouby, závrtné šrouby

Anotace textu normy ASTM F468-22 :

Keywords:

bolts, cap screws, socket head cap screws, general use, nonferrous, studs,, ICS Number Code 21.060.10 (Bolts, screws, studs)

Doplňující informace

Significance and Use

12.1?For purposes of determining compliance with the specified limits for requirements of the properties listed in this specification, an observed value or calculated value shall be rounded in accordance with Practice E29.

1. Scope

1.1?This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. and socket head cap screws (including socket head cap, button head and flat countersunk head configurations) with nominal thread 0.06 (size 0) through 1.500 in. inclusive in diameter manufactured from a number of alloys in common use and intended for general service applications.

1.2?Applicable nuts for use with bolts, cap screws, and studs covered by this specification are covered by Specification F467.

1.2.1?The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

Note 1:?A complete metric companion to Specification F468 has been developedF468M; therefore no metric equivalents are presented in this specification.

1.3?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

B211-12	Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
E62-89(1996)	Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
B154-16(2022)	Standard Test Method for Mercurous Nitrate Test for Copper Alloys
E34-11	Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E18-22	Standard Test Methods for Rockwell Hardness of Metallic Materials
E8/E8M-24	Standard Test Methods for Tension Testing of Metallic Materials
D3951-18(2023)	Standard Practice for Commercial Packaging
B574-23	Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
F1470-24	Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
F606/F606M-21	Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
F467-13(2018)	Standard Specification for Nonferrous Nuts for General Use
E1409-13(2021)	Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
E354-21e1	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys (Includes all amendments and changes 2/23/2022).
E120-00	Standard Test Methods for Chemical Analysis of Titanium and Titanium Alloys (Withdrawn 2003)
E76-88(1998)	Standard Test Methods for Chemical Analysis of Nickel-Copper Alloys (Withdrawn 2003)
E55-23	Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
E54-80(1996)	Standard Test Methods for Chemical Analysis of Special Brasses and Bronzes (Withdrawn 2002)
E38-85	Methods for Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys (Withdrawn 1989)
B565-20	Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
F788-20	Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
E478-08(2017)	Standard Test Methods for Chemical Analysis of Copper Alloys
E227-90(1996)	Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique (Withdrawn 2002)
E165/E165M-23	Standard Practice for Liquid Penetrant Testing for General Industry
E101-91	Test Method for Spectrographic Analysis of Aluminum and Aluminum Alloys by the Point-To-Plane Technique (Withdrawn 1996)
E92-23	Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
E75-76(1996)	Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys
E53-07	Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
B193-20	Standard Test Method for Resistivity of Electrical Conductor Materials

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.