Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Molybdenum Wire and Rod for Electronic Applications
Automaticky přeložený název:
Standardní specifikace pro drát z molybdenu a Rod pro elektronické aplikace
NORMA vydána dne 1.5.2009
Označení normy: ASTM F289-96(2009)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2009
Kód zboží: NS-54674
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
electronic applications, molybdenum, molybdenum wire and rod, stress-relief annealed condition, Electrical conductor wire--specifications, Electronic materials/applications--specifications, Glass electronic seals, Mandrels, Metal electronic components/devices--specifications, Molybdenum (electronic applications)--specifications, Seals--electronic applications (specifications), Wire--electronic devices, ICS Number Code 29.060.10 (Wires)
1. Scope | ||||||||||||||||
D
1.1 This specification covers two grades of molybdenum wire less than 0.050 in. (1.27 mm) in diameter and one grade of molybdenum rod 1.00 in. (25.4 mm) or less in diameter as follows: 1.1.1 Grade 1—Commercially pure molybdenum wire suitable for leads, hooks, supports, heaters, and metal-to-glass seals. 1.1.2 Grade 2—Commercially pure molybdenum wire suitable for mandrel either black or cleaned. 1.1.3 Grade 3—Commercially pure molybdenum rod suitable for leads, hooks, supports, and metal-to-glass seals. 1.2 The term wire applies to all spooled or coiled material and 0.050 in. (1.3 mm) or less in diameter and to short cut lengths 0.020 in. (0.51 mm) or less in diameter. 1.3 The term rod applies to all material over 0.020 in. (0.51 mm) in diameter, supplied in straight lengths. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 01.07.2025 (Počet položek: 2 206 436)
© Copyright 2025 NORMSERVIS s.r.o.