D3078-02(2021)e1
|
Standard Test Method for Determination of
Leaks in Flexible Packaging by Bubble Emission (Includes all
amendments and changes 2/15/2021).
|
D3079-94(1999)
|
Standard Test Method for Water Vapor
Transmission of Flexible Heat-Sealed Packages for Dry Products
|
D3335-85a(2020)
|
Standard Test Method for Low
Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic
Absorption Spectroscopy (Includes all amendments and changes
2/6/2020).
|
D3420-21
|
Standard Test Method for Pendulum Impact
Resistance of Plastic Film
|
D3776-09
|
Standard Test Methods for Mass Per Unit
Area (Weight) of Fabric
|
D3985-17
|
Standard Test Method for Oxygen Gas
Transmission Rate Through Plastic Film and Sheeting Using a
Coulometric Sensor
|
D4169-23
|
Standard Practice for Performance Testing
of Shipping Containers and Systems
|
D4279-95(2022)
|
Standard Test Methods for Water Vapor
Transmission of Shipping Containers—Constant and Cycle Methods
|
D4321-15
|
Standard Test Method for Package Yield of
Plastic Film (Withdrawn 2024)
|
D4332-22
|
Standard Practice for Conditioning
Containers, Packages, or Packaging Components for Testing
|
D4754-18
|
Standard Test Method for Two-Sided Liquid
Extraction of Plastic Materials Using FDA Migration Cell
|
D5264-98(2019)
|
Standard Practice for Abrasion Resistance
of Printed Materials by the Sutherland Rub Tester
|
D7386-16
|
Standard Practice for Performance Testing
of Packages for Single Parcel Delivery Systems
|
E398-20
|
Standard Test Method for Water Vapor
Transmission Rate of Sheet Materials Using Dynamic Relative
Humidity Measurement
|
F17-20
|
Standard Terminology Relating to Primary
Barrier Packaging
|
F88-07
|
Standard Test Method for Seal Strength of
Flexible Barrier Materials
|
F99-21
|
Standard Guide for Writing a
Specification for Flexible Barrier Rollstock Materials
|
F151-86(1997)
|
Standard Test Method for Residual
Solvents in Flexible Barrier Materials (Withdrawn 2004)
|
F372-99
|
Standard Test Method for Water Vapor
Transmission Rate of Flexible Barrier Materials Using an Infrared
Detection Technique
|
F392-93(1999)
|
Standard Test Method for Flex Durability
of Flexible Barrier Materials
|
F748-16
|
Standard Practice for Selecting Generic
Biological Test Methods for Materials and Devices
|
D3718-85A(2022)e1
|
Standard Test Method for Low
Concentrations of Chromium in Paint by Atomic Absorption
Spectroscopy (Includes all amendments and changes 7/7/2022).
|
F2391-22
|
Standard Test Method for Measuring
Package and Seal Integrity Using Helium as the Tracer Gas
|
F2475-20
|
Standard Guide for Biocompatibility
Evaluation of Medical Device Packaging Materials
|
F2476-20
|
Standard Test Method for the
Determination of Carbon Dioxide Gas Transmission Rate (CO2TR)
Through Barrier Materials Using an Infrared Detector
|
F2559-06
|
Standard Guide for Writing a
Specification for Sterilizable Peel Pouches
|
F2622-20
|
Standard Test Method for Oxygen Gas
Transmission Rate Through Plastic Film and Sheeting Using Various
Sensors
|
F2638-22
|
Standard Test Method for Using Aerosol
Filtration for Measuring the Performance of Porous Packaging
Materials as a Surrogate Microbial Barrier
|
F2714-08(2021)
|
Standard Test Method for Oxygen Headspace
Analysis of Packages Using Fluorescent Decay
|
F2824-10(2020)
|
Standard Test Method for Mechanical Seal
Strength Testing for Round Cups and Bowl Containers with Flexible
Peelable Lids
|
F2825-18
|
Standard Practice for Climatic Stressing
of Packaging Systems for Single Parcel Delivery
|
F2981-15(2020)
|
Standard Test Method for Verifying
Nonporous Flexible Barrier Material Resistance to the Passage of
Air
|
F3004-13(2020)
|
Standard Test Method for Evaluation of
Seal Quality and Integrity Using Airborne Ultrasound
|
F3039-23
|
Standard Test Method for Detecting Leaks
in Nonporous Packaging or Flexible Barrier Materials by Dye
Penetration
|
D589-97
|
Standard Test Method for Opacity of Paper
(15°Diffuse Illuminant A, 89% Reflectance Backing and Paper
Backing)
|
D638-22
|
Standard Test Method for Tensile
Properties of Plastics
|
|
Bacterial Filtration Efficiency
|
F1927-20
|
Standard Test Method for Determination of
Oxygen Gas Transmission Rate, Permeability and Permeance at
Controlled Relative Humidity Through Barrier Materials Using a
Coulometric Detector
|
F1929-23
|
Standard Test Method for Detecting Seal
Leaks in Porous Medical Packaging by Dye Penetration
|
F1980-21
|
Standard Guide for Accelerated Aging of
Sterile Barrier Systems and Medical Devices
|
F2029-16(2021)
|
Standard Practices for Making Laboratory
Heat Seals for Determination of Heat Sealability of Flexible
Barrier Materials as Measured by Seal Strength
|
F2054-07
|
Standard Test Method for Burst Testing of
Flexible Package Seals Using Internal Air Pressurization Within
Restraining Plates
|
F2095-07(2021)
|
Standard Test Methods for Pressure Decay
Leak Test for Flexible Packages With and Without Restraining
Plates
|
F2096-11(2019)
|
Standard Test Method for Detecting Gross
Leaks in Packaging by Internal Pressurization (Bubble Test)
|
F2203-13(2022)
|
Standard Test Method for Linear
Measurement Using Precision Steel Rule
|
F2217-02
|
Standard Practice for Coating/Adhesive
Weight Determination
|
F2250-13(2018)
|
Standard Practice for Evaluation of
Chemical Resistance of Printed Inks and Coatings on Flexible
Packaging Materials
|
F2251-13(2023)
|
Standard Test Method for Thickness
Measurement of Flexible Packaging Material
|
F2252-13
|
Standard Practice for Evaluating Ink or
Coating Adhesion to Flexible Packaging Materials Using Tape
|
F2227-13(2021)
|
Standard Test Method for Non-Destructive
Detection of Leaks in Non-sealed and Empty Packaging Trays by CO2
Tracer Gas Method
|
F2228-13(2021)
|
Standard Test Method for Non-Destructive
Detection of Leaks in Packaging Which Incorporates Porous Barrier
Material by CO2 Tracer Gas Method
|
F813-20
|
Standard Practice for Direct Contact Cell
Culture Evaluation of Materials for Medical Devices
|
F895-11(2016)
|
Standard Test Method for Agar Diffusion
Cell Culture Screening for Cytotoxicity
|
F904-22
|
Standard Practice for Separation of Plies
for Bond Strength of Laminated Flexible Materials
|
F2338-09(2020)
|
Standard Test Method for Nondestructive
Detection of Leaks in Packages by Vacuum Decay Method
|
F1140-07
|
Standard Test Methods for Internal
Pressurization Failure Resistance of Unrestrained Packages
|
F1249-20
|
Standard Test Method for Water Vapor
Transmission Rate Through Plastic Film and Sheeting Using a
Modulated Infrared Sensor
|
F1306-21
|
Standard Test Method for Slow Rate
Penetration Resistance of Flexible Barrier Films and Laminates
|
F1307-20
|
Standard Test Method for Oxygen
Transmission Rate Through Dry Packages Using a Coulometric
Sensor
|
F1443-93(1998)
|
Standard Practice for Using 0.008-in.
(0.203-mm) Aperture Reflectometers as Test Instruments for
Measuring Visual Image Quality of Business Copy Images
|
F1608-21
|
Standard Test Method for Microbial
Ranking of Porous Packaging Materials (Exposure Chamber Method)
|
F1884-04(2023)
|
Standard Test Methods for Determining
Residual Solvents in Packaging Materials
|
F1886-98
|
Standard Test Method for Determining
Integrity of Seals for Medical Packaging by Visual Inspection
|
F1921-12
|
Standard Test Methods for Hot Seal
Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising
the Sealing Surfaces of Flexible Webs
|
F3136-22
|
Standard Test Method for Oxygen Gas
Transmission Rate through Plastic Film and Sheeting using a Dynamic
Accumulation Method
|
EN 868/1
|
Annex C Gurley, Schopper, Dye
Penetration
|
|
Plastics--Determination of Gas
Transmission Rate of Films and Thin Sheets Under Atmospheric
Pressure--Manometric Method
|
|
Paper and Board--Determination of Air
Permeance (Medium Range)--Part 5: Gurley Method
|
ISO 10993
|
Biological Evaluation of Medical
Devices
|
|
Packaging for Terminally Sterilized
Medical Devices, Annex C
|
|
|
|
|
D645-D645M-97
|
Standard Test Method for Thickness of
Paper and Paperboard
|
D726-94(1999)
|
Standard Test Method for Resistance of
Nonporous Paper to Passage of Air
|
D374-99
|
Standard Test Methods for Thickness of
Solid Electrical Insulation
|
D882-18
|
Standard Test Method for Tensile
Properties of Thin Plastic Sheeting
|
D1003-21
|
Standard Test Method for Haze and
Luminous Transmittance of Transparent Plastics
|
D1434-23
|
Standard Test Method for Determining Gas
Permeability Characteristics of Plastic Film and Sheeting
|
D1709-22
|
Standard Test Methods for Impact
Resistance of Plastic Film by the Free-Falling Dart Method
|
D1777-96(2019)
|
Standard Test Method for Thickness of
Textile Materials
|
D1894-14
|
Standard Test Method for Static and
Kinetic Coefficients of Friction of Plastic Film and Sheeting
(Withdrawn 2023)
|
D1922-23
|
Standard Test Method for Propagation Tear
Resistance of Plastic Film and Thin Sheeting by Pendulum Method
|
D1938-19
|
Standard Test Method for Tear-Propagation
Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a
Single-Tear Method
|
D2019-97
|
Standard Test Method for Dirt in Paper
and Paperboard
|
D2457-21
|
Standard Test Method for Specular Gloss
of Plastic Films and Solid Plastics
|