Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM F1567-94(2013) 1.5.2013 náhled

Doplňující informace

ASTM F1567-94(2013)

Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers

Automaticky přeložený název:

Standardní specifikace pro výrobků nebo Cast automatický samočistící, topný olej a mazací olej sítka

NORMA vydána dne 1.5.2013

Jazyk
Provedení	PDF - okamžité stažení - 2 020.00 Kč Tištěné - 2 020.00 Kč
Dostupnost	SKLADEM
Cena	2 020.00 Kč bez DPH
2 020.00 Kč

Informace o normě:

Označení normy: ASTM F1567-94(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2013
Kód zboží: NS-50770
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Mazací systémy

Anotace textu normy ASTM F1567-94(2013) :

Keywords:

automatic self-cleaning strainers, fuel oil strainers, lubrication oil strainers, simplex strainers, ICS Number Code 21.260 (Lubrication systems)

Doplňující informace

1. Scope

1.1 This specification covers automatic or continuously self-cleaning automatic strainers, or both, for use in fuel and lubrication oil systems. The strainer is designed to operate under positive pressure (discharge side of the pump). Strainers manufactured to this specification are suitable for use in any marine environment.

1.2 It is not the intent of this document to redefine existing filtration standards. The intent is to provide sound guidelines for purchasers and designers of lube oil and fuel oil systems. Nominal micron requirements and filter efficiencies shall be as agreed upon by the purchaser and manufacturer and stated in the purchase order document.

2. Referenced Documents

SP55	Quality Standards for Valve, Flanges and Fittings and Other Piping Components (Visual Method)
MIL-P-116	Preservation, Methods of
MIL-B-121	Barrier Material, Greaseproofed, Water Proofed, Flexible
F1199-21	Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150?F Maximum)
F795-88(1993)	Standard Practice for Determining the Performance of a Filter Medium Employing a Single-Pass, Constant-Rate, Liquid Test (Withdrawn 2002)
D3951-18(2023)	Standard Practice for Commercial Packaging
B16.42	Ductile Iron Pipe Flanges and Flanged Fittings Class 150 and 300
B16.5	Steel Pipe Flanges and Flanged Fittings (Including Ratings for Class 150, 300, 400, 600, 900, 1500, and 2500)
ASME Boiler and Pressure Vessel Code:	Section VIII Division 1,Pressure Vessels
ASME Boiler and Pressure Vessel Code:	Section IX, Welding and Brazing Procedures
F1200-21a	Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150?F (1 MPa and 65?C)) (Includes all amendments and changes 9/14/2021).
Y14.5	Dimensioning and Tolerancing
AWS D1.3	Structural Welding Code
MIL-STD-740	Airborne and Structureborne Noise Measurement and Acceptance Criteria of Shipboard Equipment
SP25	Standard Marking Systems for Valves and Fittings
MIL-STD-2073-1	Material Procedures for Development and Application of Packaging Requirements
MIL-S-901	Shock Tests, H.I. (High Impact): Shipboard Machinery, Equipment and Systems, Requirements for
MIL-P-15024	Plates, Tags and Bands for Identification of Equipment
MIL-P-15024/5	Plates, Identification
MIL-STD-167-1	Mechanical Vibrations of Shipboard Equipment (Type I--Environmental and Type II Internally Induced)