Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM F1511-18

Standard Specification for Mechanical Seals for Shipboard Pump Applications

Přeložit název

NORMA vydána dne 1.4.2018

Jazyk
Provedení	Online zabezpečené PDF - 2 583.80 Kč Tištěné - 2 583.80 Kč
Dostupnost	SKLADEM
Cena	2583.80 Kč bez DPH
2 583.80 Kč

Informace o normě:

Označení normy: ASTM F1511-18
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2018
Kód zboží: NS-844676
Počet stran: 26
Přibližná hmotnost: 78 g (0.17 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Potrubní systémy lodí

Anotace textu normy ASTM F1511-18 :

Keywords:

ICS Number Code 47.020.30 (Piping systems)

Doplňující informace

1. Scope

1.1 This specification covers mechanical end-face seals for centrifugal and positive displacement pumps for shipboard use.

1.2 The following types of seals are not included in this specification: lip seals, oil seals, circumferential seals, or labyrinth seals.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. A companion hard metric standard is in the process of preparation.

1.4 Special requirements for U.S. Navy Shipboard Pump Applications are included in Supplement S1.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

A313/A313M-18(2025)	Standard Specification for Stainless Steel Spring Wire
A351/A351M-24e1	Standard Specification for Castings, Austenitic, for Pressure-Containing Parts (Includes all amendments and changes 2/3/2025).
B505/B505M-23	Standard Specification for Copper Alloy Continuous Castings
D1141-98(2021)	Standard Practice for Preparation of Substitute Ocean Water
B670-25	Standard Specification for Precipitation-Hardening Nickel Alloy Plate, Sheet, and Strip for High-Temperature Service
B637-26	Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
B584-22	Standard Specification for Copper Alloy Sand Castings for General Applications
B473-24	Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy Bar and Wire
B472-26	Standard Specification for Nickel Alloy Billets and Bars for Reforging
B446-26	Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloy, Nickel-Chromium-Molybdenum-Silicon Alloy, and Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
B443-26	Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy and Nickel-Chromium-Molybdenum-Silicon Alloy Plate, Sheet, and Strip
A436-24	Standard Specification for Austenitic Gray Iron Castings
A494/A494M-26	Standard Specification for Castings, Nickel and Nickel Alloy
A564/A564M-25	Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A240/A240M-26	Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A276-13	Standard Specification for Stainless Steel Bars and Shapes
A108-24	Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A182/A182M-26a	Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service (Includes all amendments and changes 6/25/2026).
A579-A579M-20	Standard Specification for Superstrength Alloy Steel Forgings (Withdrawn 2024)
A693-24	Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A744/A744M-21a	Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service (Includes all amendments and changes 11/10/2021).
B62-17(2025)	Standard Specification for Composition Bronze or Ounce Metal Castings
B127-25	Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip
B164-26	Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
B166-25	Standard Specification for Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Rod, Bar, and Wire
D3294-22	Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes
D3951-18(2023)	Standard Practice for Commercial Packaging
ASQC Z1.4	American Society of Quality, Quality Conformance Inspection
ANSI Y14.1	Drawing Sheet Size and Format
ANSI Y14.2
ANSI Y14.3	Multi and Sectional View Drawings
ANSI Y14.5	Dimensioning and Tolerancing for Engineering Drawings
ANSI Y14.6
D1418-22	Standard Practice for Rubber and Rubber Latices—Nomenclature
ANSI Y14.26.3	Computer-Aided Preparation of Production Definition Data, Terms and Definitions
B168-26	Standard Specification for Nickel-Chromium-Aluminum Alloys, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Plate, Sheet, and Strip
B271-11	Standard Specification for Copper-Base Alloy Centrifugal Castings
B333-25	Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
B338-17(2026)	Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
B348-13	Standard Specification for Titanium and Titanium Alloy Bars and Billets
B367-22	Standard Specification for Titanium and Titanium Alloy Castings
B335-25	Standard Specification for Nickel-Molybdenum Alloy Rod

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.