Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure (Includes all amendments And changes 12/31/2018).
Automaticky přeložený název:
Standardní zkušební metoda pro statické zkoušení Tubeless pneumatik míry ztráty tlak v pneumatice
NORMA vydána dne 1.12.2010
Označení normy: ASTM F1112-06a(2010)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.12.2010
Kód zboží: NS-49171
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
inflation pressure, pneumatic tires, rate of loss, static testing, Air diffusion rate, Inflation pressure testing, Passenger car tires, Pneumatic tires, Pressure testing, Rate of pressure loss, Static tests--rubber, Tire testing, ICS Number Code 83.160.01 (Tyres in general)
Significance and Use | ||||
Inflation pressure retention is an important property of tire performance because underinflation can adversely affect tire rolling resistance, handling, structural integrity, and tread life. This test method is useful for research and development evaluation of the effects of tire component formulations and geometry on inflation pressure retention. Testing for rate of pressure loss under static conditions is practical because of the following: Tires in normal use are predominantly at rest, and Relative air diffusion rates of various tires in normal intermittent road service will correlate with static relative rates, to a first approximation. The relative air diffusion rates of different tires may not be quite the same under dynamic flexing as when tested statically, but the difference is believed to be small. The results from this test method are not suitable for inferring tire inflation retention under severe service conditions, such as heavy cornering or impacts, that might cause significant air loss at the tire-rim seal. |
||||
1. Scope | ||||
1.1 This test method covers the determination of the rate of inflation pressure loss resulting from air diffusion through the structures of tubeless tires under constant temperature conditions. The testing is done under static conditions, that is, nonrotating, nonloaded tires. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||
2. Referenced Documents | ||||
|
Historická
1.9.2012
Historická
1.1.2013
Historická
1.1.2011
Historická
1.2.2013
Historická
1.6.2012
Historická
15.5.2014
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.