Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Evaluating Solar Absorptive Materials for Thermal Applications
Automaticky přeložený název:
Standardní praxe pro hodnocení Solární absorpční materiály pro tepelné aplikace
NORMA vydána dne 1.3.2015
Označení normy: ASTM E744-07(2015)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.3.2015
Kód zboží: NS-586078
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
absorptance, aging, emittance, laboratory exposure, outdoor weathering, solar collectors, thermal cycling, thermal stagnation, xenon arc ,, ICS Number Code 27.160 (Solar energy engineering)
Significance and Use | ||||||||||||||||||||
4.1 The methods in this practice are intended to aid in the assessment of long-term performance by comparative testing of absorptive materials. The results of the methods, however, have not been shown to correlate to actual in-service performance. 4.2 The testing methodology in this practice provides two testing methods, in accordance with Fig. 1. 4.2.1 Method A, which aims at decreasing the time required for evaluation, uses a series of individual tests to simulate various exposure conditions. 4.2.2 Method B utilizes a single test of actual outdoor exposure under conditions simulating thermal stagnation. 4.2.3 Equivalency of the two methods has not yet been established. |
||||||||||||||||||||
1. Scope | ||||||||||||||||||||
1.1 This practice covers a testing methodology for evaluating absorptive materials used in flat plate or concentrating collectors, with concentrating ratios not to exceed five, for solar thermal applications. This practice is not intended to be used for the evaluation of absorptive surfaces that are (1.2 Test methods included in this practice are property measurement tests and aging tests. Property measurement tests provide for the determination of various properties of absorptive materials, for example, absorptance, emittance, and appearance. Aging tests provide for exposure of absorptive materials to environments that may induce changes in the properties of test specimens. Measuring properties before and after an aging test provides a means of determining the effect of the exposure. 1.3 The assumption is made that solar radiation, elevated temperature, temperature cycles, and moisture are the primary factors that cause degradation of absorptive materials. Aging tests are described for exposure of specimens to these factors. Note 1: For some geographic locations, other factors, such as
salt spray and dust erosion, may be important. They are not
evaluated by this practice.
1.4 The values stated in SI units are to be regarded as the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||
|
Historická
1.11.2013
Historická
1.2.2015
Historická
1.3.2012
Historická
1.6.2010
Historická
1.12.2012
Historická
1.12.2012
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 03.05.2024 (Počet položek: 2 896 946)
© Copyright 2024 NORMSERVIS s.r.o.