Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM E3038-16

Standard Practice for Assessing and Qualifying Candidates as Inspectors of Firestop Systems and Fire-Resistive Joint Systems

Přeložit název

NORMA vydána dne 15.7.2016

Jazyk
Provedení	PDF - okamžité stažení - 1 549.70 Kč Tištěné - 1 549.70 Kč
Dostupnost	SKLADEM
Cena	1 549.70 Kč bez DPH
1 549.70 Kč

Informace o normě:

Označení normy: ASTM E3038-16
Poznámka: NEPLATNÁ
Datum vydání normy: 15.7.2016
Kód zboží: NS-650117
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Ochrana proti ohni všeobecně

Anotace textu normy ASTM E3038-16 :

Keywords:
firestop, fire-resistive, fire barrier, inspection, inspector, joint, perimeter joint,, ICS Number Code 13.220.01 (General standards related to fire protection)

Doplňující informace

Significance and Use

5.1 This Practice is intended to provide a means for the AHJ or AA, or both, to verify evidence of a candidate’s experience, knowledge, and qualifications.

5.2 This Practice is not intended to set forth individual credentials for an AHJ or AA, or both.

5.3 This Practice is not intended to establish any performance criteria of firestop systems or fire-resistive joint systems.

Note 4: The performance criteria of a firestop system or fire-resistive joint system is found in many national and international test methods. Some of these methods include, but are not limited to, Test Method E814, UL 1479, ISO 10295-1, Test Method E1966, UL 2079, ISO 10295-2, Test Method E2307, Test Method E2837, etc.

1. Scope

1.1 This Practice is intended to assist an authority having jurisdiction (AHJ) or authorizing authority (AA), or both, in establishing minimum qualifications for candidates who desire to conduct inspections in compliance with Practices E2174 and E2393.

Note 1: Authority having jurisdiction (AHJ) is defined in Practices E2174 and E2393.

Note 2: Authorizing authority (AA) is defined in Practices E2174 and E2393. Examples of the AA include, but are not limited to, the responsible architect, engineer, building owner, or their representative.

1.2 This Practice makes available a procedure for a candidate to provide evidence to the AHJ or AA, or both, of their specialized knowledge and technical competence related to the firestop industry.

1.3 This Practice determines the technical proficiency of a candidate based upon a minimum amount of education, experience, and knowledge possessed, which is needed to ensure competence to conduct inspections in compliance with Practices E2174 and E2393.

1.4 The purpose of this Practice is to allow the AHJ or AA, or both, to assess the ability of the candidate to comprehend and use inspection documents to conduct inspections in compliance with Practices E2174 and E2393.

Note 3: Inspection document is defined in Practices E2174 and E2393. The firestop submittal, when approved for use, should have sufficient details, including, but not limited to, the firestop manufacturer’s product data, a design listing of the tested firestop, and when required a judgment (Alternative Means and Methods). The judgment is commonly referred to as an “Engineering Judgment” in the firestop industry. These judgments are not always issued by an engineer or a registered design professional.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.6 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

2. Referenced Documents

ISO 10295-1	Fire tests for building elements and componentsFire testing of service installationsPart 1: Penetration seals
ISO 10295-2	Fire tests for building elements and componentsFire testing of service installationsPart 2: Linear joint (gap) seals
ISO/IEC 17065	Conformity assessmentRequirements for bodies certifying products, processes and services
ISO/IEC 17020	Conformity assessmentRequirements for the operation of various types of bodies performing inspection
E2837-23a	Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies (Includes all amendments and changes 1/1/2024).
E2750-23	Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM E814
E2307-23b	Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus (Includes all amendments and changes 12/21/2023).
E2393-20a	Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers (Includes all amendments and changes 10/13/2020).
E2174-20a	Standard Practice for On-Site Inspection of Installed Firestop Systems (Includes all amendments and changes 6/11/2020).
E2032-21	Standard Practice for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
UL 1479	Standard for Fire Tests of Penetration Firestops
UL 2079	Standard for Tests for Fire Resistance of Building Joint Systems
ISO/DTR 12470-1
E176-24	Standard Terminology of Fire Standards
E631-15	Standard Terminology of Building Constructions
E699-16	Standard Specification for Agencies Involved in Testing, Quality Assurance, and Evaluating of Manufactured Building Components
E814-23a	Standard Test Method for Fire Tests of Penetration Firestop Systems (Includes all amendments and changes 7/26/2023).
E1966-15(2019)	Standard Test Method for Fire-Resistive Joint Systems

Doporučujeme:

EviZak - všechny zákony včetně jejich evidence na jednom místě

Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.