ASTM E699-16

4.1 This specification provides basic criteria for evaluating the qualifications of agencies utilizing the ASTM test methods to test and evaluate manufactured building components. The existence of a formal accrediting authority such as a federal, state, municipal, or nongovernmental body is not necessary for the use of this specification. These criteria may be supplemented by more specific criteria for particular classes of testing, quality assurance, and evaluative agencies.

4.2 The intent of this specification is to provide a “consensus-system” standardized basis for evaluating a testing, quality assurance, or evaluating agency with respect to its capability to provide the specific service(s) needed by the user without prejudice to the agency offering other services or being affiliated with other agencies or organizations. In those situations where a strict literal interpretation of the phrase “shall be made available,” as used in this specification, would be inordinately burdensome to an agency, it will generally be sufficient that the agency concerned has the information available for “on-site” review. This specification is not intended to be used by accredited agencies or personnel in the performance of Special Inspection services listed in the IBC Code or any other Code.

4.3 The criteria of this specification are described in terms of the basic information necessary for an accrediting authority to evaluate the capability, with respect to objectivity, and competency of a testing, quality assurance, and evaluating agency regarding common characteristics pertaining to the organization, human resources, material resources, and quality systems employed by the agency in performing the services offered. Typically, accreditation of an agency involves the following three essential phases:

4.4 Although three categories are presented, an agency may provide one or any combination of these categories for which it can qualify. An agency requesting qualification under more than one category must satisfy the criteria for each category for which acceptability is desired.

4.5 The criteria set forth herein represent areas upon which agreement can be reached. There may be other areas to be given consideration which may be of importance to the user. The user should include such other areas as a part of its own criteria.

4.6 This specification represents minimum criteria necessary to perform, monitor, or evaluate the test results of those standards promulgated by ASTM Committee E06.

4.7 It is anticipated that the ultimate user of this specification will have the expertise necessary to exercise good judgment in the areas of human resources, physical resources, and quality systems of the agency being evaluated.

4.8 When assessing the organization and the resources of a particular agency, the judgment should take into account only those factors or resources specifically related to the technological area being served by the agency in terms of the specific evaluation, and only as necessary to form an adequate judgment in relation to the evaluation. Conversely, those technological areas served by a particular agency that are not required to be evaluated in a specific instance should not be impugned through the lack of such evaluation. The absence of evaluation or the denial of accreditation by any one party should not prejudice future evaluations by other parties because small differences in needs can influence the judgement of users. The use of this specification does not abrogate the right to “due process” necessary to all assessments under this specification. The right of rebuttal to any conclusions drawn during an accreditation procedure shall be extended to the agency.

4.9 Each act of evaluation should be viewed as a “one-to-one” judgment and should not be construed as being a universal judgment by others interested in the agency's services. In order to ensure proper interpretation of each act of evaluation, the purpose of the evaluation and the evaluation area shall be clearly specified in any report of an evaluation made pursuant to this specification.

1.1 This specification defines the minimum requirements for agencies engaged in inspections and testing performance in accordance with ASTM standards for factory built building components and assemblies.

1.2 The criteria in this specification are provided for assessing the competence of an agency to properly perform designation testing, quality assurance, and inspection.

1.3 This specification does not cover Special Inspections or construction materials testing or inspection, or both. See Specification E329 for these items.

1.4 The criteria presented herein are divided into three categories of endeavor, namely,

Part A—Standards and Criteria for Testing Agencies

Part B—Standards and Criteria for Quality Assurance Agencies

Part C—Standards and Criteria for Evaluating Agencies

1.5 The fundamental purpose of this specification is to provide criteria for evaluating an agency as denoted in 1.4 either by a user of that service or by an accrediting authority.

1.6 It is not the purpose of this specification to provide a basis for determining the quality of a product or service being evaluated.

1.7 This specification is not intended for the evaluation of those activities normally associated with the production and sale of products and the like, such as a manufacturer's internal quality program. However, any organization may request or perform an evaluation of its own in-house facilities under this specification if it so desires.

1.8 It is not the intent of this specification to be the basis for the determination of the type of agency to be selected by the user.

1.9 This specification is used in conjunction with Specification E541 and Practice E651/E651M.

1.10 The use of SI or inch – pound units, or combination of, will be the responsibility of the technical committees referred to in this standard.