Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D975-22a
Standard Specification for Diesel Fuel (Includes all amendments And changes 9/6/2023).
Přeložit název
NORMA vydána dne 1.11.2022
Informace o normě:
Označení normy: ASTM D975-22a
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2022
Kód zboží: NS-1097018
Počet stran: 29
Přibližná hmotnost: 87 g (0.19 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM D975-22a :
Keywords:
biodiesel, biodiesel blend, diesel, diesel fuel, fuel oil, petroleum and petroleum products,, ICS Number Code 75.160.20 (Liquid fuels)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1.1?This specification covers seven grades of diesel fuel suitable for various types of diesel engines. These grades are described as follows: 1.1.1?Grade No. 1-D S15A special-purpose, light middle distillate fuel for use in diesel engine applications requiring a fuel with 15 ppm sulfur (maximum) and higher volatility than that provided by Grade No. 2-D S15 fuel.1.1.2?Grade No. 1-D S500A special-purpose, light middle distillate fuel for use in diesel engine applications requiring a fuel with 500 ppm sulfur (maximum) and higher volatility than that provided by Grade No. 2-D S500 fuel.1.1.3?Grade No. 1-D S5000A special-purpose, light middle distillate fuel for use in diesel engine applications requiring a fuel with 5000 ppm sulfur (maximum) and higher volatility than that provided by Grade No. 2-D S5000 fuels. 1.1.4?Grade No. 2-D S15A general purpose, middle distillate fuel for use in diesel engine applications requiring a fuel with 15 ppm sulfur (maximum). It is especially suitable for use in applications with conditions of varying speed and load.2 1.1.5?Grade No. 2-D S500A general-purpose, middle distillate fuel for use in diesel engine applications requiring a fuel with 500 ppm sulfur (maximum). It is especially suitable for use in applications with conditions of varying speed and load.2 1.1.6?Grade No. 2-D S5000A general-purpose, middle distillate fuel for use in diesel engine applications requiring a fuel with 5000 ppm sulfur (maximum), especially in conditions of varying speed and load. 1.1.7?Grade No. 4-DA heavy distillate fuel, or a blend of distillate and residual oil, for use in low- and medium-speed diesel engines in applications involving predominantly constant speed and load. Note 1:?A more detailed description of the grades of diesel
fuels is given in X1.2.
Note 2:?The Sxxx designation has been adopted to distinguish
grades by sulfur rather than using words such as Low Sulfur as
previously because the number of sulfur grades is growing and the
word descriptions were thought to be not precise. S5000 grades
correspond to the so-called regular sulfur grades, the previous No.
1-D and No. 2-D. S500 grades correspond to the previous Low Sulfur
grades. S15 grades were not in the previous grade system and are
commonly referred to as Ultra-Low Sulfur grades or ULSD.
1.2?This specification, unless otherwise provided by agreement between the purchaser and the supplier, prescribes the required properties of diesel fuels at the time and place of delivery. 1.2.1?Nothing in this specification shall preclude observance of federal, state, or local regulations which can be more restrictive. Note 3:?The generation and dissipation of static electricity
can create problems in the handling of distillate diesel fuels. For
more information on the subject, see Guide D4865.
1.3?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Doporučujeme:
