Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM D6975-04(2010) 1.10.2010 náhled

Doplňující informace

ASTM D6975-04(2010)

Standard Test Method for Cummins M11 EGR Test (Withdrawn 2019)

Automaticky přeložený název:

Standardní zkušební metoda pro Cummins M11 EGR testu

NORMA vydána dne 1.10.2010

Jazyk
Provedení	PDF - okamžité stažení - 2 874.70 Kč Tištěné - 2 874.70 Kč
Dostupnost	SKLADEM
Cena	2874.70 Kč bez DPH
2 874.70 Kč

Informace o normě:

Označení normy: ASTM D6975-04(2010)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2010
Kód zboží: NS-37167
Počet stran: 38
Přibližná hmotnost: 114 g (0.25 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Spalovací motory

Anotace textu normy ASTM D6975-04(2010) :

Keywords:

crosshead wear, Cummins M11 EGR, de-rate protocols, diesel engine oil, exhaust gas recirculation, lubricants, oil filter delta pressure, sludge, top ring weight loss, valve train, Cumins m11 EGR test, EGR (exhaust gas recirculation) test, Heavy-duty engines, High sootconditions, Performance--petroleum products/applications, Power cylinder wear, Valve train wear, Wear testing--petroleum products, ICS Number Code 27.020 (Internal combustion engines)

Doplňující informace

Significance and Use

This test method was developed to assess the performance of an engine oil to control engine wear and deposits under heavy-duty operating conditions selected to accelerate soot generation, valve train wear, and deposit formation in a turbocharged, aftercooled four-stroke-cycle diesel engine equipped with exhaust gas recirculation hardware.

This test method may be used for engine oil specification acceptance when all details of this test method are in compliance. Applicable engine oil service categories are included in Specification D4485.

The design of the engine used in this test method is representative of many, but not all, modern diesel engines. This factor, along with the accelerated operating conditions, needs to be considered when extrapolating test results.

1. Scope

1.1 This test method is commonly referred to as the Cummins M11 Exhaust Gas Recirculation Test (EGR). The test method defines a heavy-duty diesel engine test procedure conducted under high soot conditions to evaluate oil performance with regard to valve train wear, sludge deposits, and oil filter plugging in an EGR environment.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

D6483-04	Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009)
D6557-18e1	Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils (Includes all amendments and changes 11/21/2022).
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E344-23	Terminology Relating to Thermometry and Hydrometry

Code of Federal Regulations	Title 40 Part 86.310-79
D4737-21	Standard Test Method for Calculated Cetane Index by Four Variable Equation
D4739-23	Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
D5185-18	Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D5302-01a	Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions (Withdrawn 2003)
D5844-98	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) (Withdrawn 2003)
D5967-21	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
D2896-21	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
D2274-14(2019)	Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
D4052-22	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D445-23	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
D482-19	Standard Test Method for Ash from Petroleum Products
D524-15(2019)	Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
D613-24	Standard Test Method for Cetane Number of Diesel Fuel Oil
D664-18e2	Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration (Includes all amendments and changes 1/4/2019).
D976-21e1	Standard Test Method for Calculated Cetane Index of Distillate Fuels (Includes all amendments and changes 2/23/2023).
D1319-20a	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption (Includes all amendments and changes 9/14/2020).
D2500-23	Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
D2622-21	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
D4485-22e1	Standard Specification for Performance of Active API Service Category Engine Oils (Includes all amendments and changes 12/8/2022).
D2709-22	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
D287-22	Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
D129-18	Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) (Withdrawn 2023)
D130-19	Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
D86-23ae1	Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Includes all amendments and changes 2/9/2024).
D92-18	Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
D97-17b(2022)	Standard Test Method for Pour Point of Petroleum Products (Includes all amendments and changes 11/29/2022).