Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM D6483-04

Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009)

Automaticky přeložený název:

Standardní zkušební metoda pro hodnocení Oleje dieselového motoru v T - 9 s dieselovým motorem (Withdrawn 2009 )

NORMA vydána dne 1.11.2004

Jazyk
Provedení	PDF - okamžité stažení - 1 932.50 Kč Tištěné - 1 932.50 Kč
Dostupnost	SKLADEM
Cena	1 932.50 Kč bez DPH
1 932.50 Kč

Informace o normě:

Označení normy: ASTM D6483-04
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2004
Kód zboží: NS-35329
Počet stran: 18
Přibližná hmotnost: 54 g (0.12 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM D6483-04 :

Keywords:
cylinder liner wear, diesel engine oil, lead, lubricants, soot, top ring weight loss, T-9 Diesel Engine, ICS Number Code 27.060.10 (Liquid and solid fuel burners)

Doplňující informace

Significance and Use

This test method was developed to evaluate the wear performance of engine oils in turbocharged and intercooled four-cycle diesel engines. Obtain results from used oil analysis and component measurements before and after test.

The test method may be used for engine oil specification acceptance when all details of the procedure are followed.

1. Scope

1.1 This test method covers an engine test procedure for evaluating diesel engine oils for performance characteristics, including lead corrosion and wear of piston rings and cylinder liners. This test method is commonly referred to as the Mack T-9.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Annex A5 for specific safety precautions.

2. Referenced Documents

D482-19	Standard Test Method for Ash from Petroleum Products
D524-15(2019)	Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
D613-24	Standard Test Method for Cetane Number of Diesel Fuel Oil
D664-18e2	Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration (Includes all amendments and changes 1/4/2019).
D1319-20a	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption (Includes all amendments and changes 9/14/2020).
D2500-23	Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
D2622-21	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E178-21	Standard Practice for Dealing With Outlying Observations
E344-23	Terminology Relating to Thermometry and Hydrometry
SAE J1995	Engine Power Test Code - Spark Ignition and Compression Ignition - Gross Power Rating
D2709-22	Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
D2896-21	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
D4052-22	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D4485-22e1	Standard Specification for Performance of Active API Service Category Engine Oils (Includes all amendments and changes 12/8/2022).
D4737-21	Standard Test Method for Calculated Cetane Index by Four Variable Equation
D4739-23	Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
D5185-18	Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D5302-01a	Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions (Withdrawn 2003)
D5844-98	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) (Withdrawn 2003)
D5967-21	Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
D86-23ae1	Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Includes all amendments and changes 2/9/2024).
D93-20	Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
D97-17b(2022)	Standard Test Method for Pour Point of Petroleum Products (Includes all amendments and changes 11/29/2022).
D129-18	Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) (Withdrawn 2023)
D130-19	Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
D235-22	Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
D287-22	Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
D445-23	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Doporučujeme:

Aktualizace zákonů

Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.